Onshore wind significantly affects wave run-up and overtopping, thereby representing a major variable to account for in the design process. The aim of this study is to analyze the ability of numerical models to properly reproduce the wind effect on the overtopping at vertical seawall and to use them to understand how the wind influences the overtopping process as well. We use the RANS model, FLOW-3D, and the NLSW model, SWASH; both model the action of wind through the shear stress that it exerts on the sea surface. Although a simplified modelling of wind has been adopted, the CFD model has led to physically consistent results. On the other hand, SWASH seems to be unsuitable for reproducing the enhancement of the overtopping rate due to wind. CFD numerical results show that the wind affects only the lower overtopping regime (i.e., q < 1 l/s/m); as the mean overtopping discharge decreases, the influence of wind increases. Specifically, wind plays a key role in pure “white overtopping”, where the advection of spray is the predominant mechanism of the overtopping process. The effects of wind thus seem to be important in the design of seawalls, but are difficult to quantify through hydraulic models because of the unknown scaling laws. Therefore, we have found that a full-scale numerical approach is suitable to study the influence of wind on wave overtopping and to evaluate the wind factor to take into account in the design process.
For crenulate-shaped bays, the coastal outline assumes a specific shape related to the predominant waves in the area: it generally consists of a tangential zone downcoast and a curved portion upcoast. Many coastal engineers have attempted to derive an expression of the headland bay shapes that emerge when a full equilibrium is reached (stable or dynamic). However, even though models for static equilibrium bays exist, they are merely of an empirical kind, lacking further insight on relationships between incident wave characteristics and beach shape. In addition, it is commonly believed that shoreline profiles tend to follow wave fronts, but this has been never fully verified. In this paper, we investigate a possible correlation between static equilibrium profiles and wave front shapes. Numerical experiments have been performed using the MIKE 21 Boussinesq Wave module, and the generated wave fronts have been compared to the hyperbolic-tangent equilibrium profile. A thoughtful analysis of results revealed that a single-headland equilibrium profile is merely the wave front translated perpendicularly to the wave direction at the headland tip, without any influence of wave period or in wave direction. A new function called the “wave-front-bay-shape equation” has been obtained, and the application and validation of this formula to the case-study bay of the Bagnoli coast (south-west of Italy) is described in the paper.
A mid-term analysis of shoreline evolution was carried out in the present paper for the Trigno river mouth area (5.2 km), located in the northern part of the Molise coast region (southeast Italy). The littoral drift rose (LDR) concept was employed, coupled to the GENESIS one-line model, to produce numerical simulations. The LDR graph was used to define a single, time-invariant, “equivalent wave” component (EW), which was supposed to entirely rule the shoreline changes. Given the inherent bimodality affecting the Molise wave climate, EW could result not significant in forecasting shoreline evolution, since both a climate inversion and a time-varying diffusion extra effect are expected. These aspects, never investigated in the literature, are deepened in the present paper, with the main aims of firstly assessing the explanatory power of the LDR equivalent wave and its significance within a bimodal climate, and secondly checking the role of a time-varying diffusivity. Results confirmed the reliability of the EW concept, even within a bimodal climate. Moreover, the possible effect of a time-varying diffusion, which is expected with a large directional variability, produced insignificant results with respect to the EW.
The phenomenon of wave breaking dominates the hydrodynamics of the surf zone. Therefore, numerical modelling of shallow water phenomena requires a proper reproduction of the wave breaking mechanism. In this study, we analyze the ability of two open-source Boussinesq-type models, Celeris and FUNWAVE-TVD (Total Variation Diminishing version), to correctly reproduce wave breaking. The main aim is to obtain aware tools for numerical modelling of surf zone hydrodynamics. The results are compared with physical model tests and Computational Fluid Dynamics (CFD) numerical modelling.
The work examines the wave overtopping process of vertical seawalls with very shallow foreshores. The non- hydrostatic model SWASH is used as an exploratory tool to deepen our knowledge about this process. Nowadays, phase-resolving numerical models are indeed considered reliable tools due to their attested ability to capture the physics of complex hydrodynamics phenomena, such as wave overtopping. Specifically, we explore the relationship between the mean overtopping discharge and the Fourier power spectrum, and then we provide a new overtopping model. The latter relates the flow rate to a new time-domain statistic representing the upper tail of wave elevation distribution at the toe of the structure. Finally, almost 200 laboratory experiments validate numerical findings.