Soil moisture mapping at a regional scale is commonplace since these data are required in many applications, such as hydrological and agricultural analyses. The use of remotely sensed data for the estimation of deep soil moisture at a regional scale has received far less emphasis. The objective of this study was to map the 500-m, 8-day average and daily soil moisture at different soil depths in Oklahoma from remotely sensed and ground-measured data using the random forest (RF) method, which is one of the machine-learning approaches. In order to investigate the estimation accuracy of the RF method at both a spatial and a temporal scale, two independent soil moisture estimation experiments were conducted using data from 2010 to 2014: a year-to-year experiment (with a root mean square error (RMSE) ranging from 0.038 to 0.050 m3/m3) and a station-to-station experiment (with an RMSE ranging from 0.044 to 0.057 m3/m3). Then, the data requirements, importance factors, and spatial and temporal variations in estimation accuracy were discussed based on the results using the training data selected by iterated random sampling. The highly accurate estimations of both the surface and the deep soil moisture for the study area reveal the potential of RF methods when mapping soil moisture at a regional scale, especially when considering the high heterogeneity of land-cover types and topography in the study area.
Vegetation indices (VIs) data derived from satellite imageries play a vital role in land surface vegetation and dynamic monitoring. Due to the excessive noises (e.g., cloud cover, atmospheric contamination) in daily VI data, temporal compositing methods are commonly used to produce composite data to minimize the negative influence of noise over a given compositing time interval. However, VI time series with high temporal resolution were preferred by many applications such as vegetation phenology and land change detections. This study presents a novel strategy named DAVIR-MUTCOP (DAily Vegetation Index Reconstruction based on MUlti-Temporal COmposite Products) method for normalized difference vegetation index (NDVI) time-series reconstruction with high temporal resolution. The core of the DAVIR-MUTCOP method is a combination of the advantages of both original daily and temporally composite products, and selecting more daily observations with high quality through the temporal variation of temporally corrected composite data. The DAVIR-MUTCOP method was applied to reconstruct high-quality NDVI time-series using MODIS multi-temporal products in two study areas in the continental United States (CONUS), i.e., three field experimental sites near Mead, Nebraska from 2001 to 2012 and forty-six AmeriFlux sites evenly distributed across CONUS from 2006 to 2010. In these two study areas, the DAVIR-MUTCOP method was also compared to several commonly used methods, i.e., the Harmonic Analysis of Time-Series (HANTS) method using original daily observations, Savitzky–Golay (SG) filtering using daily observations with cloud mask products as auxiliary data, and SG filtering using temporally corrected composite data. The results showed that the DAVIR-MUTCOP method significantly improved the temporal resolution of the reconstructed NDVI time series. It performed the best in reconstructing NDVI time-series across time and space (coefficient of determination (R2 = 0.93 ~ 0.94) between reconstructed NDVI and ground-observed LAI). DAVIR-MUTCOP method presented the highest robustness and accuracy with the change of the filtering parameter (R2 = 0.99 ~ 1.00, bias = 0.001, root mean square error (RMSE) = 0.020). Only MODIS data were used in this study; nevertheless, the DAVIR-MUTCOP method proposed a universal and potential way to reconstruct daily time series of other VIs or from other operational sensors, e.g., AVHRR and VIIRS.
Air temperature (Ta) is a required input in a wide range of applications, e.g., agriculture. Land Surface Temperature (LST) products from Moderate Resolution Imaging Spectroradiometer (MODIS) are widely used to estimate Ta. Previous studies of these products in Ta estimation, however, were generally applied in small areas and with a small number of meteorological stations. This study designed both temporal and spatial experiments to estimate 8-day and daily maximum and minimum Ta (Tmax and Tmin) on three spatial scales: climate zone, continental and global scales from 2009 to 2018, using the Random Forest (RF) method based on MODIS LST products and other auxiliary data. Factors contributing to the relation between LST and Ta were determined based on physical models and equations. Temporal and spatial experiments were defined by the rules of dividing the training and validation datasets for the RF method, in which the stations selected in the training dataset were all included or not in the validation dataset. The RF model was first trained and validated on each spatial scale, respectively. On a global scale, model accuracy with a determination coefficient (R2) > 0.96 and root mean square error (RMSE) < 1.96 °C and R2 > 0.95 and RMSE < 2.55 °C was achieved for 8-day and daily Ta estimations, respectively, in both temporal and spatial experiments. Then the model was trained and cross-validated on each spatial scale. The results showed that the data size and station distribution of the study area were the main factors influencing the model performance at different spatial scales. Finally, the spatial patterns of the model performance and variable importance were analyzed. Both daytime and nighttime LST had a significant contribution in the 8-day Tmax estimation on all the three spatial scales; while their contribution in daily Tmax estimation varied over different continents or climate zones. This study was expected to improve our understanding of Ta estimation in terms of accuracy variations and influencing variables on different spatial and temporal scales. The future work mainly includes identifying underlying mechanisms of estimation errors and the uncertainty sources of Ta estimation from a local to a global scale.
11 December 2023 in Land Degradation & Development
Maize gross primary productivity (GPP) contributes the most to the global cropland GPP, making it crucial to accurately estimate maize GPP for the global carbon cycle. Previous research validated machine learning (ML) methods using remote sensing and meteorological data to estimate plant GPP, yet they disregard vegetation physiological dynamics driven by phenology. Leaf nitrogen content per unit leaf area (i.e., specific leaf nitrogen (SLN)) greatly affects photosynthesis. Its maximum allowable value correlates with a phenological factor conceptualized as normalized maize phenology (NMP). This study aims to validate SLN and NMP for maize GPP estimation using four ML methods (random forest (RF), support vector machine (SVM), convolutional neutral network (CNN), and extreme learning machine (ELM)). Inputs consist of vegetation index (NDVI), air temperature, solar radiation (SSR), NMP, and SLN. Data from four American maize flux sites (NE1, NE2, and NE3 sites in Nebraska and RO1 site in Minnesota) were gathered. Using data from three NE sites to validate the effect of SLN and MMP shows that the accuracy of four ML methods notably increased after adding SLN and MMP. Among these methods, RF and SVM achieved the best performance of Nash–Sutcliffe efficiency coefficient (NSE) = 0.9703 and 0.9706, root mean square error (RMSE) = 1.5596 and 1.5509 gC·m−2·d−1, and coefficient of variance (CV) = 0.1508 and 0.1470, respectively. When evaluating the best ML models from three NE sites at the RO1 site, only RF and CNN could effectively incorporate the impact of SLN and NMP. But, in terms of unbiased estimation results, the four ML models were comprehensively enhanced by adding SLN and NMP. Due to their fixed relationship, introducing SLN or NMP alone might be more effective than introducing both simultaneously, considering the data redundancy for methods like CNN and ELM. This study supports the integration of phenology and leaf-level photosynthetic factors in plant GPP estimation via ML methods and provides a reference for similar research.
The farming-pastoral ecotone (FPE) of northern China serves as a critical ecological transition zone, in which poplar plantations significantly contribute to afforestation for large-scale ecological restoration projects. Due to concerns about sustainability, precise monitoring of the spatiotemporal dynamics of poplar plantations is needed, but systematic research is lacking. This study investigated the spatiotemporal dynamics of poplar plantation area and growth status from 1989 to 2022, taking the Anguli Nao watershed, a typical region in the FPE of northern China, as an example. Firstly, by utilizing satellite images and the random forest classification algorithm, the poplar plantation areas were well extracted, with a high accuracy over 93% and extremely strong consistency as demonstrated by a Kappa coefficient larger than 0.88. Significant changes in poplar plantation areas existed from 1989 to 2022, with an overall increasing trend (1989: 130.3 km2, 2002: 275.9 km2, 2013: 256.0 km2, and 2022: 289.2 km2). Furthermore, the accuracy of our extraction method significantly outperformed six widely used global land cover products, all of which failed to capture the distribution of poplar plantations (producer’s accuracy < 0.21; Kappa coefficient < 0.18). In addition, the analysis of vegetation growth status revealed large-scale degradation from 2002 to 2013, with a degradation ratio of 24.4% that further increased to 31.1% by 2022, satisfying the significance test via Theisl–Sen trend analysis and the Mann–Kendall test. This study points out the uncertainty of existing land cover products and risk of poplar plantations in the FPE of northern China and provides instructive reference for similar research.