The emergence of connected and automated vehicle (CAV) technology has the potential to bring a number of benefits to our existing transportation systems. Specifically, when CAVs travel along an arterial corridor with signalized intersections, they can not only be driven automatically using pre-designed control models but can also communicate with other CAVs and the roadside infrastructure. In this paper, we describe a cooperative eco-driving (CED) system targeted for signalized corridors, focusing on how the penetration rate of CAVs affects the energy efficiency of the traffic network. In particular, we propose a role transition protocol for CAVs to switch between a leader and following vehicles in a string. Longitudinal control models are developed for conventional vehicles in the network and for different CAVs based on their roles and distances to intersections. A microscopic traffic simulation evaluation has been conducted using PTV VISSIM with realistic traffic data collected for the City of Riverside, CA, USA. The effects on traffic mobility are evaluated, and the environmental benefits are analyzed by the U.S. Environmental Protection Agency's MOtor Vehicle Emission Simulator (MOVES) model. The simulation results indicate that the energy consumption and pollutant emissions of the proposed system decrease, as the penetration rate of CAVs increases. Specifically, more than 7% reduction on energy consumption and up to 59% reduction on pollutant emission can be achieved when all vehicles in the proposed system are CAVs.

The connected vehicle eco-approach and departure (EAD) application for signalized intersections has been widely studied and is deemed to be effective in terms of reducing energy consumption and both greenhouse gas and other criteria pollutant emissions. Prior studies have shown that tangible environmental benefits can be gained by communicating the driver with the signal phase and timing (SPaT) information of the upcoming traffic signals with fixed time control to the driver. However, similar applications to actuated signals pose a significant challenge due to their randomness to some extent caused by vehicle actuation. Based on the framework previously developed by the authors, a real-world testing has been conducted along the El Camino Real corridor in Palo Alto, CA, USA, to evaluate the system performance in terms of energy savings and emissions reduction. Strategies and algorithms are designed to be adaptive to the dynamic uncertainty for actuated signal and real-world traffic. It turns out that the proposed EAD system can save 6% energy for the trip segments when activated within DSRC ranges and 2% energy for all trips. The proposed system can also reduce 7% of CO, 18% of HC, and 13% of NOx for all trips. Those results are compatible with the simulation results and validate the previously developed EAD framework.

Ramp merging is considered as one of the most difficult driving scenarios due to the chaotic nature in both longitudinal and lateral driver behaviors (namely lack of effective coordination) in the merging area. In this study, we have designed a cooperative ramp merging system for connected vehicles, allowing merging vehicles to cooperate with others prior to arriving at the merging zone. Different from most of the existing studies that utilize dedicated short-range communication, we adopt a Digital Twin approach based on vehicle-to-cloud communication. On-board devices upload the data to the cloud server through the 4G/LTE cellular network. The server creates Digital Twins of vehicles and drivers whose parameters are synchronized in real time with their counterparts in the physical world, processes the data with the proposed models in the digital world, and sends advisory information back to the vehicles and drivers in the physical world. A real-world field implementation has been conducted in Riverside, California, with three passenger vehicles. The results show the proposed system addresses the issues of safety and environmental sustainability with an acceptable communication delay, compared to the baseline scenario where no advisory information is provided during the merging process.

Recently, there has been significant research on environment-focused connected vehicle (CV) applications that involve determining optimal speed profiles for vehicles traveling through signalized intersections and conveying this information to drivers via driver-vehicle interfaces (DVI's). However, findings from previous studies indicate that drivers may not be able to precisely follow the recommended speed profiles, resulting in degraded effectiveness of the applications. Moreover, the DVI could be distracting, which may compromise safety. As an alternative, partial automation can play an important role in ensuring that the benefits of these CV applications are fully realized. In this study, a partially automated vehicle system with an eco-approach and departure feature (called the GlidePath Prototype), which can receive dedicated short range communication message sets from the intersection and automatically follow recommended speed profiles, was developed, demonstrated, and evaluated. The results revealed that compared to manually following the recommended speed profiles, the GlidePath Prototype reduced fuel consumption by 17% on average. In some cases, the fuel savings are greater than 40% while the travel time is shortened by up to 64%. Furthermore, the system potentially improved the driving comfort since it would smooth out the speed profiles.

Connected and automated vehicles (CAVs) are supposed to share the road with human-driven vehicles (HDVs) in a foreseeable future. Therefore, considering the mixed traffic environment is more pragmatic, as the well-planned operation of CAVs may be interrupted by HDVs. In the circumstance that human behaviors have significant impacts, CAVs need to understand HDV behaviors to make safe actions. In this study, we develop a Driver Digital Twin (DDT) for the online prediction of personalized lane change behavior, allowing CAVs to predict surrounding vehicles’ behaviors with the help of the digital twin technology. DDT is deployed on a vehicle-edge-cloud architecture, where the cloud server models the driver behavior for each HDV based on the historical naturalistic driving data, while the edge server processes the real-time data from each driver with his/her digital twin on the cloud to predict the personalized lane change maneuver. The proposed system is first evaluated on a human-in-the-loop co-simulation platform, and then in a field implementation with three passenger vehicles driving along an on/off ramp segment connecting to the edge server and cloud through the 4G/LTE cellular network. The lane change intention can be recognized in 6 seconds on average before the vehicle crosses the lane separation line, and the Mean Euclidean Distance between the predicted trajectory and GPS ground truth is 1.03 meters within a 4-second prediction window. Compared to the general model, using a personalized model can improve prediction accuracy by 27.8%. The demonstration video of the proposed system can be watched at https://youtu.be/5cbsabgIOdM.