Steel fibers and their aspect ratios are important parameters that have significant influence on the mechanical properties of ultrahigh-performance fiber-reinforced concrete (UHPFRC). Steel fiber dosage also significantly contributes to the initial manufacturing cost of UHPFRC. This study presents a comprehensive literature review of the effects of steel fiber percentages and aspect ratios on the setting time, workability, and mechanical properties of UHPFRC. It was evident that (1) an increase in steel fiber dosage and aspect ratio negatively impacted workability, owing to the interlocking between fibers; (2) compressive strength was positively influenced by the steel fiber dosage and aspect ratio; and (3) a faster loading rate significantly improved the mechanical properties. There were also some shortcomings in the measurement method for setting time. Lastly, this research highlights current issues for future research. The findings of the study are useful for practicing engineers to understand the distinctive characteristics of UHPFRC.
12 September 2024 in Construction and Building Materials
Ultra-high-performance concrete (UHPC) is considered to be a promising material for the strengthening of damaged reinforced concrete (RC) members due to its high mechanical strength and low permeability. However, its high material cost, limited code provisions, and scattered material properties limit its wide application. There is a great need to review existing articles and create a database to assist different technical committees for future code provisions on UHPC. This study presents a comprehensive overview focusing on the effect of the UHPC layer on the flexural and shear strengthening of RC beams. From this review, it was evident that (1) different retrofitting configurations have a remarkable effect on the cracking moment compared to the maximum moment in the case of flexural strengthening; (2) the ratios of the shear span and UHPC layer thickness have a notable effect on shear strengthening and the failure mode; and (3) different bonding techniques have insignificant effects on shear strengthening but a positive impact on flexural strengthening. Overall, it can be concluded that three-side strengthening has a higher increment range for flexural (maximum, 81%–120%; cracking, 300%–500%) and shear (maximum, 51%–80%; cracking, 121%–180%) strengthening. From this literature review, an experimental database was established, and different failure modes were identified. Finally, this research highlights current issues with UHPC and recommends some future works.
12 August 2022 in Developments in the Built Environment