Ultra-high-performance concrete (UHPC) is considered to be a promising material for the strengthening of damaged reinforced concrete (RC) members due to its high mechanical strength and low permeability. However, its high material cost, limited code provisions, and scattered material properties limit its wide application. There is a great need to review existing articles and create a database to assist different technical committees for future code provisions on UHPC. This study presents a comprehensive overview focusing on the effect of the UHPC layer on the flexural and shear strengthening of RC beams. From this review, it was evident that (1) different retrofitting configurations have a remarkable effect on the cracking moment compared to the maximum moment in the case of flexural strengthening; (2) the ratios of the shear span and UHPC layer thickness have a notable effect on shear strengthening and the failure mode; and (3) different bonding techniques have insignificant effects on shear strengthening but a positive impact on flexural strengthening. Overall, it can be concluded that three-side strengthening has a higher increment range for flexural (maximum, 81%–120%; cracking, 300%–500%) and shear (maximum, 51%–80%; cracking, 121%–180%) strengthening. From this literature review, an experimental database was established, and different failure modes were identified. Finally, this research highlights current issues with UHPC and recommends some future works.
Overall structural integrity and load transfer between concrete and reinforcement enabling composite action relies on the bond between concrete and reinforcement. Bond strength determination of reinforced concrete is an essential task that a pullout test can determine. Experimental pullout behaviour can be affected by various parameters, such as concrete and steel strength, boundary conditions, etc. Therefore, a parametric study on pullout tests is time-consuming. In addition, measurements of internal stress-strain components and damages of constitutive materials are also difficult in experimental endeavours. In this context, finite element (FE) models should be developed to perform a parametric study with cost and time-saving. This study proposes a finite element modeling strategy of reinforced concrete under pullout force by using the expected failure mechanism to predict bond-slip behaviour in ABAQUS. In FE models, surface-to-surface cohesive interaction behaviour was used to assign interaction between reinforcement and concrete. The proposed modelling strategy was validated with available experimental data from four reference specimens, having all possible failures (i.e., pullout, splitting, and splitting-pullout) under pullout loading. The finite element analysis showed that the proposed FE modeling strategy performed well in predicting bond-slip behaviour in elastic regions. Additionally, maximum bond stresses were predicted satisfactorily, except for the splitting failure pattern, using the proposed FE modelling strategy.
28 March 2023 in Asian Journal of Civil Engineering