The partial oxidation of ethane to ethylene and acetic acid on supported MoVNbPd/TiO2 (P25 of Degussa) has been investigated. Pd was added in a nano-metallic form. The catalyst composition was also different from similar studied catalysts. This results in a better selectivity towards acetic acid formation. The reaction was carried out in a tubular reactor at temperature range 225–275 °C, total pressure range 0–200 psig and oxygen percentage in the feed gas of 10–40%. The feed gas contains ethane and oxygen. In this work, we develop a kinetic model for the reaction for the developed catalyst. In this model, we assume that oxidation reactions take place on different sites; ethane oxidation takes place on one site, ethylene oxidation on another site, and CO is oxidized to CO2 on a third site. The model exhibits good agreement with the experimental data.
This paper presents the studies of the development of a high-performance epoxy coating for steel substrates. To this end, it investigated the synergistic effect of incorporating zinc oxide (ZnO) nanoparticles into nanosilica containing epoxy formulations. The mechanical properties of the epoxy coating formulations were improved by modifying the surfaces of the silica nanoparticles (5 wt.%) with 3-glycidoxypropyl trimethoxysilane, which ensured their dispersal through the material. Next, the ZnO nanoparticles (1, 2, or 3 wt.%) were incorporated to improve the corrosion performance of the formulations. The anticorrosive properties of the coatings were examined by electrochemical impedance spectroscopy (EIS) of coated mild steel specimens immersed in 3.5% NaCl solution over different time intervals (1 h to 30 days). Incorporation of the ZnO nanoparticles and the nanosilica into the coating formulation improved the corrosion resistance of the epoxy coating even after long-term exposure to saline test solutions. Finally, to evaluate how the nanoparticles affected the chemical and morphological properties of the prepared coatings, the coatings were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD).
The synthesis of dimethyl carbonate (DMC) from methanol and Carbon dioxide (CO2) has been investigated over 5% Rh/Al2O3 catalyst. Diffuse Reflectance Infrared Fourier Transfer Spectroscopy (DRIFTS) was used to probe the reaction adsorbates which showed that activation of methanol and CO2 involves generation of intermediate methoxy species and formate ingredients, participating in elementary steps of DMC formation. Formation of DMC involves parallel routes comprising interaction of the OH group of Al2O3 through an acid/base mechanism and formate pathway with participation of metal sites. DMC in acid/base pathway is formed via methoxy species to form methoxy carbonate (CH3O)CO2 (active adsorbate), which then reacts with the methyl species to form DMC. The pathway involving metal Rh sites generates an additional elementary step for the involvement of CO2 in the reaction through active formate species. The synergy of parallel pathways determines the performance of the 5% Rh/Al2O3 catalyst. Further improvement of catalyst performance should be based on such a feature of the reaction mechanism.
This work provides an alternate unique simple methodology to design and synthesize chemically modified nanophotocatalyst based on high surface area TiO2 nanoparticles that can be used efficiently for the photodegradation of organic pollutants under normal visible light rather than complicated UV irradiation. In this study, dual visible light and UV-driven nanophotocatalysts were synthesized via wet chemistry procedures using high surface area TiO2 nanoparticles functionalized with (3-Aminopropyl) trimethoxysilane and attached chemically to the CuXO to improve the charge separation and maintain the non-charge recombination. The successful modification of the TiO2 nanoparticles and the formation of the TiO2-NH2-CuxO nanophotocatalyst were confirmed using different characterization techniques, and the results revealed the synthesis of high surface area TiO2 nanoparticles, and their chemical modification with an amino group and further decoration with copper to produce TiO2-NH2-CuxO nanophotocatalyst. The photocatalytic activity of TiO2 and TiO2-NH2-CuxO nanophotocatalyst were evaluated using methylene blue (MB) dye; as an example of organic pollutants. The resulting TiO2-NH2-CuxO nanophotocatalyst exhibited superior photocatalytic activity for the degradation of MB dye under visible light irradiation, due to the reduction in the energy bandgap. The degradation of the MB dye using the TiO2-NH2-CuxO nanophotocatalyst was investigated using LC-MS, and the results revealed that the hydroxyl free radical is mainly responsible for the cleavage and the degradation of the MB dye.
12 September 2013 in Arabian Journal for Science and Engineering