In this article, the theoretical and experimental aspects of three active thermography approaches: pulsed thermography (PT), lock-in thermography (LT), and vibrothermography (VT), are discussed in relation to the nondestructive evaluation (NDE) of honeycomb sandwich structures. For this purpose, two standard specimens with simulated defects (delaminations, core unbonds, excessive adhesive, and crushed core) were tested, and results were processed, examined, and compared. As will be pointed out, the similarities and differences between these active approaches allow conclusions to be made about the most suitable approach for a particular application. In addition, results from NDE inspection by X-rays and c-scan ultrasounds are provided and discussed for reference.

Using aerial platforms for Non-Destructive Inspection (NDI) of large and complex structures is a growing field of interest in various industries. Infrastructures such as: buildings, bridges, oil and gas, etc. refineries require regular and extensive inspections. The inspection reports are used to plan and perform required maintenance, ensuring their structural health and the safety of the workers. However, performing these inspections can be challenging due to the size of the facility, the lack of easy access, the health risks for the inspectors, or several other reasons, which has convinced companies to invest more in drones as an alternative solution to overcome these challenges. The autonomous nature of drones can assist companies in reducing inspection time and cost. Moreover, the employment of drones can lower the number of required personnel for inspection and can increase personnel safety. Finally, drones can provide a safe and reliable solution for inspecting hard-to-reach or hazardous areas. Despite the recent developments in drone-based NDI to reliably detect defects, several limitations and challenges still need to be addressed. In this paper, a brief review of the history of unmanned aerial vehicles, along with a comprehensive review of studies focused on UAV-based NDI of industrial and commercial facilities, are provided. Moreover, the benefits of using drones in inspections as an alternative to conventional methods are discussed, along with the challenges and open problems of employing drones in industrial inspections, are explored. Finally, some of our case studies conducted in different industrial fields in the field of Non-Destructive Inspection are presented.

Composite materials are one of the primary structural components in most current transportation applications, such as the aerospace industry. Composite material diagnostics is a promising area in the fight against structural damage in aircraft and spaceships. Detection and diagnostic technologies often provide analysts with a valuable and rapid mechanism to monitor the health and safety of composite materials. Although many attempts have been made to develop damage detection techniques and make operations more efficient, there is still a need to develop/improve existing methods. Pulsed thermography (PT) technology was used in this study to obtain healthy and defective data sets from custom-designed composite samples having similar dimensions but different thicknesses (1.6 and 3.8). Ten carbon fibre-reinforced plastic (CFRP) panels were tested. The samples were subjected to impact damage of various energy levels, ranging from 4 to 12 J. Two different methods have been applied to detect and classify the damage to the composite structures. The first applied method is the statistical analysis, where seven different statistical criteria have been calculated. The final results have proved the possibility of detecting the damaged area in most cases. However, for a more accurate detection technique, a machine learning method was applied to thermal images; specifically, the Cube Support Vector Machine (SVM) algorithm was selected. The prediction accuracy of the proposed classification models was calculated within a confusion matrix based on the dataset patterns representing the healthy and defective areas. The classification results ranged from 78.7% to 93.5%, and these promising results are paving the way to develop an automated model to efficiently evaluate the damage to composite materials based on the non-distractive testing (NDT) technique.