To compare the trueness and precision of 3D-printed versus milled monolithic zirconia crowns (MZCs). A model of a maxilla with a prepared premolar was scanned with an industrial scanner (ATOSQ®, Gom) and an MZC was designed in computer-assisted-design (CAD) software (DentalCad®, Exocad). From that standard tessellation language (STL) file, 10 MZCs (test) were 3D-printed with a Lithography-based Ceramic Manufacturing (LCM) printer (CerafabS65®, Lithoz) and 10 MZCs (control) were milled using a 5-axis machine (DWX-52D®, DGShape). All MZCs were sintered and scanned with the aforementioned scanner. The surface data of each sample (overall crown, marginal area, occlusal surface) were superimposed to the original CAD file (ControlX®, Geomagic) to evaluate trueness: (90-10)/2, absolute average (ABS AVG) and root mean square (RMS) values were obtained for test and control groups (MathLab®, Mathworks) and used for analysis. Finally, the clinical precision (marginal adaptation, interproximal contacts) of test and control MZCs was investigated on a split-cast model printed (Solflex350®, Voco) from the CAD project, and compared. The milled MZCs had a significantly higher trueness than the 3D-printed ones, overall [(90-10)/2 printed 37.8 µm vs milled 21.2 µm; ABS AVG printed 27.2 µm vs milled 15.1 µm; RMS printed 33.2 µm vs milled 20.5 µm; p = 0.000005], at the margins [(90-10)/2 printed 25.6 µm vs milled 12.4 µm; ABS AVG printed 17.8 µm vs milled 9.4 µm; RMS printed 22.8 µm vs milled 15.6 µm; p= 0.000011] and at the occlusal level [(90-10)/2 printed 50.4 µm vs milled 21.9 µm; ABS AVG printed 29.6 µm vs milled 14.7 µm; RMS printed 38.9 µm vs milled 22.5 µm; p = 0.000005]. However, with regard to precision, both test and control groups scored highly, with no significant difference either in the quality of interproximal contact points (p = 0.355) or marginal closure (p = 0.355). Milled MZCs had a statistically higher trueness than 3D-printed ones; all crowns, however, showed high precision, compatible with the clinical use. Although milled MZCs remain more accurate than 3D-printed ones, the LCM technique seems able to guarantee the production of clinically precise zirconia crowns.

Background: Haptics‐enhanced virtual reality (VR‐haptic) simulation in dental education has evolved considerably during the past decade, representing a promising resource of simulation‐based training opportunities to support conventional practice. We aim to summarize current literature on the applications of VR‐haptics in learning, practicing, and teaching dental education.Methods: A literature search was performed using PubMed, focusing on research articles published between January 2010 and January 2024. Out of the 667 articles that matched the search terms (dentistry, education, haptic, teaching, training, virtual reality), 105 were screened, and 42 were eligible for full‐text reading and utilization. Findings from an ongoing educator survey on the use of VR‐haptics in dental education have also been provided.Results: VR‐haptic simulation has been shown to have a supportive role in dental simulation practice. Despite training within a digital world, hand skill transfer to the real world has been demonstrated, which affords educators more flexibility in how to train their students before and during traditional preclinical and clinical practical education. The individualized VR‐haptic training and feedback help students in mastering essential working techniques, while also increasing engagement and motivation.Conclusions: VR‐haptics‐supported dental education can help students effectively address challenges during their preclinical and clinical training, as well as in their subsequent careers, and it may help mitigate some weaknesses of the current educational system. Validation is a key factor for the acceptance of VR‐haptic simulators; thus, further research and verification are needed before VR‐haptics could be considered a primary hand skill development method of learning in dental education. VR‐haptic simulation may in the future be used as an assessment tool for the students’ and clinicians’ credentialing process.

Edentulism and terminal dentition are still considered significant problems in the dental field, posing a great challenge for surgical and restorative solutions especially with immediate loading protocols. When the implant placement is planned immediately after extraction with irregular bone topography or there is an un-leveled alveolar ridge topography for any other reason, bone reduction may be required to level the alveolar crest in order to create the desired bone architecture allowing for sufficient bone width for implant placement and to insure adequate inter-arch restorative space. Bone reduction protocols exist in analog and digitally planned methodologies, with or without surgical guides to achieve the desired bone level based upon the desired position of the implants with regard to the restorative outcome. The objective of this paper was to scrutinize the literature regarding the practice of bone reduction in conjunction with implant placement, and to review different types of bone reduction surgical guides. Results: The literature reveals different protocols that provide for bone reduction with a variety of bone reduction methods. The digitally-planned surgical guide based on Cone-Beam computerized tomography (CBCT) scan reconstructed data can improve accuracy, reduce surgical time, and deliver the desired bone level for the implant placement with fewer surgical and restorative complications. The clinician’s choice is based on personal experience, training, and comfort with a specific guide type. Conclusions: Bone reduction, when required, is an indispensable step in the surgical procedure to attain suitable width of bone in anticipation of implant placement ideally determined by the desired tooth position and required restorative space based on material selection for the chosen framework design, i.e., hybrid, monolithic zirconia. Additionally, bone reduction and implant placement can be accomplished in the same surgical procedure, minimizing trauma and the need for two separate interventions.

Oral squamous cell carcinoma (OSCC) is the most common form of oral cancer, in this study, the association between OSCC and oral yeast carriage was investigated. 20 patients having OSCC as well as 40 healthy controls were tested for the presence of yeasts in the oral cavity. Fungal burdens were examined by colony forming unit determinations, while the different yeast genera in patient samples were identified by matrix-associated laser desorption/ionization-time of flight-mass spectrometry. We found that the level of oral yeast carriage was significantly higher in patients with OSCC that was accompanied by a higher diversity of yeasts in the oral cavity of these patients. We also examined the extracellular enzyme production of isolated Candida spp.; however, we found that there was no association between the lipase/protease producing capacity of Candida strains and the higher colonisation rate of neoplastic epithelium. In conclusion, our results corroborate the findings of previous studies regarding the association between oral yeast carriage and epithelial carcinoma.

Anaerobic infections are common and can cause diseases associated with severe morbidity, but are easily overlooked in clinical settings. Both the relatively small number of infections due to exogenous anaerobes and the much larger number of infections involving anaerobic species that are originally members of the normal flora, may lead to a life-threatening situation unless appropriate treatment is instituted. Special laboratory procedures are needed for the isolation, identification and susceptibility testing of this diverse group of bacteria. Since many anaerobes grow more slowly than the facultative or aerobic bacteria, and particularly since clinical specimens yielding anaerobic bacteria commonly contain several organisms and often very complex mixtures of aerobic and anaerobic bacteria, considerable time may elapse before the laboratory is able to provide a final report. Species definition based on phenotypic features is often time-consuming and is not always easy to carry out. Molecular genetic methods may help in the everyday clinical microbiological practice in laboratories dealing with the diagnostics of anaerobic infections. Methods have been introduced for species diagnostics, such as 16S rRNA PCR-RFLP profile determination, which can help to distinguish species of Bacteroides, Prevotella, Actinomyces, etc. that are otherwise difficult to differentiate. The use of DNA-DNA hybridization and the sequencing of special regions of the 16S rRNA have revealed fundamental taxonomic changes among anaerobic bacteria. Some anaerobic bacteria are extremely slow growing or not cultivatable at all. To detect them in special infections involving flora changes due to oral malignancy or periodontitis, for instance, a PCR-based hybridization technique is used. Molecular methods have demonstrated the spread of specific resistance genes among the most important anaerobic bacteria, the members of the Bacteroides genus. Their detection and investigation of the IS elements involved in their expression may facilitate following of the spread of antibiotic resistance among anaerobic bacteria involved in infections and in the normal flora members. Molecular methods (a search for toxin genes and ribotyping) may promote a better understanding of the pathogenic features of some anaerobic infections, such as the nosocomial diarrhoea caused by C. difficile and its spread in the hospital environment and the community. The investigation of toxin production at a molecular level helps in the detection of new toxin types. This mini-review surveys some of the results obtained by our group and others using molecular genetic methods in anaerobic diagnostics.

Aim: Long-term studies addressing the outcomes of single immediate implantation and provisionalization at the maxillary esthetic zone are needed. The current study aimed to assess such outcomes along a follow-up period of up to 18 years. Materials and methods: The current study is a continuation follow-up of our previously published up to 6-year follow-up study, dated between the years 2002–2008, performed in a private clinical practice in Tel-Aviv, Israel. A total of 15 patients (23 implants) who had been treated for single-tooth replacement at the maxillary esthetic zone since 2002, underwent clinical and radiographic follow-up evaluations. Primary outcomes included mean Marginal Bone Levels (MBL), with Bleeding on Probing (BOP), implant success rate, prosthetic and esthetic complications evaluated as secondary outcomes. Results: The implant success rate was at 100%. Bone remodeling processes were observed over the follow-up period, with 0.9 mm mean marginal bone loss observed during the first 6 years of observation, followed by −0.13 ± 0.06 mm mean loss after 6 to 18 years. The last finding suggests bone deposition, as reported by other studies (Donati et al., 2012). At the final radiographic evaluation, a mean MBL of 1.35 mm ± 0.16 was demonstrated. No differences with respect to implant type or site were found. A generalized absence of BOP and esthetic complications occurred in two cases as a result of continuous adjacent teeth eruption versus obvious implant ankylosis. Conclusions: Adhering to careful clinical protocols and 3D bone to implant considerations while immediately placing an anterior implant, this treatment approach offers both stable and esthetically acceptable results for the replacement of missing teeth at the maxillary esthetic zone.