Heterogeneous catalytic processes have for years been of crucial importance in the chemical industry, while biocatalitic processes have become more and more important. For both types of the processes the existence of zones without reactants were reported. Despite the fact that the dead zone can appear in real processes relatively often, the most important problem in practice is the real size of a dead zone inside a catalyst pellet or the real depth of penetration reagents in a biofilm and this is still unsolved. The knowledge of the parameters and some information about the process can allow improvement in yield, and selectivity, reduce consumption of catalyst by reducing the bed size etc. Presented in this work is a simple method of predicting the size of the inactive core of a uniformly activated catalyst pellet. The method is based on a simple mathematical model of catalyst pellet with inactive pellet centre and experimental investigations.
Nonlinear diffusion–reaction problem was investigated experimentally for the reference reaction (hydrogenation of propylene under isothermal conditions; a slab of catalyst pellet i.e., disks of large diameter/width ratio were applied). The diffusion–reaction model in the catalyst pellet with external mass-transfer resistances was solved analytically. Dependently on parameters values, two separate solutions were found: dead zone inside the pellet does not exist or it appears. In the first case, a common model is acceptable (regular model i.e., boundary value problem), in the second one, a model includes additional condition (dead zone model i.e., free boundary problem). Analysis of the solution presented indicated that either regular or “dead zone” model correctly describes the process for specific parameter values (with the only exception—multiple steady-state region—where the correct interpretation requires the combined application of the both). This result shows that the full description of the real process includes solutions of two different BVPs. Experimental research confirmed results anticipated by theory. It allowed to draw conclusions that go beyond this particular example i.e., the regular model, commonly applied in heterogeneous catalysis, does not adequately recognize dead zone problem. If “dead zone” appears, free boundary problem has to be consider, otherwise, process simulations will be incorrect. The conclusions drawn are valid also for biofilms.
1 February 2015 in Journal of Applied Computer Science Methods
In this paper, the procedure of choice of the effective numerical inversion method of Laplace transform for solving of the mathematical model of gas flow was shown. Two inversion methods are evaluated in this work: the Gaver-Stehfest method, and the Dubner and Abate method. The numerical tests has been made using test functions. Based on the test results the fast and accurate method was selected and applied for modeling of the gas flow. The Gaver-Stehfest method has proven the most effective. The model was developed using the computer algebra system Maple®. Implementation of the methods were done by authors.
2 November 2018 in The Canadian Journal of Chemical Engineering
Zones without reactants inside a catalyst pellet, the so‐called dead zones (DZs), have been reported in the case of catalysis and biocatalysis, two processes of fundamental importance. The presence of the DZ results from diffusional transport limitations when an apparent reaction order is in the range: −1 to 1. The formation of a DZ reduces the effectiveness of a catalyst and affects packed bed reactor productivity. For a simple reaction kinetic model, the width of a DZ inside a pellet can be predicted analytically by solving the appropriate differential mass balance model. However, for more complex kinetic models, the analytical solution is unknown, and a DZ position can be established only by applying a numerical method. The problem with the DZ appearance belongs to problems with moving boundaries. Its solution requires the application of a particular numerical procedure and a relatively long CPU time. In this work, a simple, high‐speed numerical method for the calculation of a DZ position inside a pellet is proposed. The proposed method, combined with the orthogonal collocation on finite elements can be applied to analyze a packed bed reactor operation.