Urea has served as the primary nitrogenous fertilizer globally since the early 1950s. It is widely recognized as the most concentrated nitrogen source, containing approximately 46% nitrogen. Presently, around 220 million t/year of urea compounds are manufactured globally to fit the requirements of the agricultural sector. However, a significant drawback of this is that approximately 30–35% of the urea used in soil can be lost to the environment because of its limited effectiveness. Enhancing the efficiency of urea utilization can be achieved by regulating the release of urea-nitrogen in the soil. Numerous researchers have reported that the use of slow or controlled fertilizers can regulate the release and accumulation of nitrogen in the soil. Moreover, the augmentation of soil nitrogen levels can be accomplished by using the slow or controlled release of urea fertilizers. The regulation of the release process can play a vital role in the peril of N loss. This can be effectively alleviated by delaying the release of nitrogen in ammonium form configuration for several days. This delay functions to diminish nitrogen losses, which are caused by the rapid hydrolysis of urea, and loss by leaching or volatilization. Therefore, this review aims to comprehensively explore the use of conventional urea and various materials employed for modifying urea. It will explain the distinctions among modification processes and their respective mechanisms. This review will also discuss the pros and cons of applying slow- and controlled-release nitrogen, the impact of modified urea compounds on crop productivity, and nitrogen use efficiency (NUE).

Combined nitrogen (N) and sulfur (S) fertilization is a good management strategy to reduce N loss and increase the efficiency of N fertilizers to achieve high grain yields and quality. Field trials for 2 yrs. (2018–2019) were conducted to evaluate the comparative advantage of conventional urea (150 N kg ha⁻¹) compared to urea+ ammonium sulfate (150 N kg ha⁻¹), urea+ calcium sulfate (150 N kg ha⁻¹), and urea cocrystals (CaSO₄.4urea) (150 N kg ha⁻¹) when applied as nitrogen fertilizers to the maize. The statistics show a significant treatments effect on developed corn cobs, fresh and dry cob yields and grain yield, with 1000 grains with better results in 2019 than in 2018. The fertilization treatments affected grain yields significantly for 2018 and 2019, respectively. Urea+ ammonium sulfate and urea cocrystal provided a significant increase in grain yields by 10.5% and 7.50%, respectively, compared to urea in 2018, w1hereas, in 2019, urea cocrystal supplied the grain yields with a significant increase of 23.07% compared to urea, followed by urea + calcium sulfate which provided a 10.46% increase compared to urea. The study highlights that using urea-sulfur fertilizers enhanced the release of mineral nitrogen in the soil, improved the grain’s N uptake by the plant and increased maize grain yields.

Investigations of substrates for growing plant saplings is the basis for the search for new components. Currently, large numbers of saplings are grown for blueberry plantations. Studies on the use of various organic and inorganic components in substrates is relevant in order to reduce the amount of excavated peat. The goal of this study was to analyze the effects of mixes of peat with different rates of spruce, pine fibers and perlite on the growth of blueberry saplings. To define the suitability of substrates, plant vigor assessments of the cultivar ‘Duke’, including plant height and leaf weight, as well as the chlorophyll fluorescence, content of extractable macronutrients and organic carbon in leaves, were investigated. The best effect on the growth of blueberry saplings, the optimal content of macronutrients in the leaves, was shown for substrates in which a part of the peat was replaced by 15–45% v/v of pine wood fiber and by 15–30% v/v of spruce wood fiber. Pine bark fiber in the mix should not exceed 30% v/v. The addition of spruce bark fibers in the different rates had a negative effect on the vegetative growth of the saplings. The quantity of peat in the substrates can also be significantly reduced by adding 15–45% v/v of perlite. These results confirm that pine and spruce fibers or perlite in substrates for blueberry sapling growing could reduce the demand for peat and should significantly contribute to the preservation of unique wetland ecosystems.

Adopting new practices is an imperative need to increase the efficiency of nitrogen use (NUE), especially in selecting appropriate N-fertilizer sources and application doses. Regretfully, conventional urea’s ability to supply nitrogen to soils is quickly lost as a result of volatilization, leaching, and denitrification. Thus, this study’s main aim was to use various modified urea compounds with different doses and investigate their effect on mineral nitrogen release in the soil to improve nitrogen uptake and its use efficiency under the corn growth system. The field trial was conducted in a randomized complete block design (RCBD) by 28 experimental plots. Seven treatments including a control (C), urea (U100 and U200), urea + potassium humate (UPH100 and UPH200), and urea cocrystal (UC100 and UC200) with four replicates were used. The results reported that the treatments significantly (p < 0.05) affected grain yields. The urea treatments (U100 = 100 kg N ha⁻¹, U200 = 200 kg N ha⁻¹) increased the grain yields by 7.16% and 30.53%, respectively, compared to the control (C), while the urea + potassium humate treatments (UPH100 = 100 kg N ha⁻¹, UPH200 = 200 kg N ha⁻¹) and urea cocrystal treatments (UC100 = 100 kg N ha⁻¹, UC200 = 200 kg N ha⁻¹) provided a 30.51, 50.47, 39.23, and 56.63% increase in grain yields, respectively, compared to the control. The treatments had significant (p ≤ 0.05) effects on the fresh leaves and stems yield and the dry matter, fresh cob, and dry cob yields. Moreover, the use of modified urea as urea + potassium humate and urea cocrystal at high rates of 200 kg N ha⁻¹ showed highly significant (p < 001) effects on the uptake in grain, stems, and total nitrogen uptake by corn compared to the control and urea alone. This study highlighted that modified urea fertilizers such as urea + potassium humate and urea cocrystal were better than conventional urea to improve corn yield productivity and N use efficiency.

Extensive application of mineral fertilizers resulted in high soil acidity, which is one of the major problems for crop production and soil degradation. Industrial solid waste, such as lime kiln dust and wood ash, can be used as alternative liming materials to benefit sustainable agricultural development. In this work, pelletized lime kiln dust with and without wood ash was utilized as liming material and the results of the three-year field study were compared with conventional mineral-based liming materials. It was determined that pelletized lime kiln dust satisfies the requirements posed by the recent European Union regulations to qualify as liming materials. The application of 2000 kg/ha Ca equivalent pelletized lime kiln dust increased soil pH_KCl by ~0.55 pH units. Moreover, pelletized lime kiln dust significantly increased spring wheat grain yields ranging from 33.6% to 40.4%, depending on the pellet size. The usage of these liming materials not only increased crop yield but also decreased heavy metal concentration in soil. Due to high alkalinity, carbonate content, easy handling, and the transportation of pelletized lime kiln dust with and without wood ash, the materials have the potential to be used in agriculture as liming materials to reduce soil acidification and increase crop productivity or be used as soil amendments.

Controlled-release urea fertilization is an innovative approach and effective means to reduce the loss of nitrogen and enhance fertilizer use efficiency to optimize crop yield while minimizing the environmental impact. The objective of this study was to investigate the dynamic process of mineral nitrogen (Nmin) release in Luvisols, Cambisols, Retisols, and Arenosols to understand the interaction between soil characteristics and mineral nitrogen release and evaluate the impact of conventional urea compared to coated urea potassium humate on barley biomass production. A pot experiment was conducted under glasshouse conditions (20 ± 2 °C and 60% Humidity). Five treatments including no fertilization as a control (C), 100 kg·N·ha⁻¹ of urea (U100), 200 kg·N·ha⁻¹ of urea (U200), 100 kg·N·ha⁻¹ of coated urea potassium humate (UPH100), and 200 kg·N·ha⁻¹ of coated urea potassium humate (UPH200) were applied to four soil and texture types. Our findings indicate that there are different patterns of mineral nitrogen release across the different soil and texture types. Ammonium levels reached their peak point in all soils within 2–7 days after application. On the other hand, the concentration of nitrate NO₃⁻–N showed a linear increase over 45 days during the experiment. The Retisol, which had a sandy clay texture, obtained the highest concentration of mineral nitrogen in both forms (NH₄ and NO₃), while the sandy texture of Arenosol showed the lowest accumulation of mineral nitrogen and its forms. The application of potassium humate caused a delay of 1–4 days in the peak of soil ammonium, which at peak accounted for approximately 25–44% of the mineral nitrogen in the soil. Furthermore, the application of urea and coated urea potassium humate exhibited significant effects on barley biomass with an increase of approximately 14–91% compared to the unfertilized treatment (control). This research contributes to our understanding of nutrient dynamics in diverse soil environments and provides insights into optimizing sustainable fertilization strategies such as controlled-release fertilizer application. The implications of these findings highlight the significance of tailored nutrient management practices based on soil texture type, which can lead to improved agricultural productivity and environmental impact.