The authors are developing an experimental technology for simulating severe accident (SA) conditions using simulant fuel material (ZrO2) that would contribute, not only to Fukushima Daiichi (1 F) decommissioning, but also to enhance the safety of worldwide existing and future nuclear power plants through clarification of accident progression behavior. Nontransfer (NTR) type plasma, which has been in practical use with a large torch capacity as high as 2 MW, has the potential to heat subject materials to very high-temperatures without selecting the target to be heated. When simulating 1 F with SA code (Severe Core Damage Analysis Package (SCDAP), Methods for Estimation of Leakages and Consequences of Releases (MELCOR) and Modular Accident Analysis Program (MAAP)), the target of this core-material-melting and relocation (CMMR) experiment was to confirm that NTR plasma has a sufficient heating performance realizing large temperature gradients (>2000 K/m) expected under 1 F conditions. The authors selected NTR-type plasma-heating technology that has the advantage of continuous heating in addition to its high-temperature level. A prototype large-scale experiment (1 m × 0.3 m dia.), called CMMR-0, was conducted in 2016, in which a large temperature gradient was realized and basic characteristics of a heated test assembly were studied. However, the maximum temperature was limited in this test by the instability of the plasma torch under low-oxygen concentrations. It was clarified through this test that an improvement in plasma-heating technology was necessary to heat the large-scale test assembly. The CMMR-1/-2 experiments were carried out in 2017 with a test assembly similar to CMMR-0, applying the improved technology (higher heating power and controlled oxygen concentration). In these two tests, heating history was different, resulting in similar physical responses with more pronounced material melting and relocation in the CMMR-2 experiment. The CMMR-2 experiment was selected from the perspective of establishing an experimental technology. The CMMR-2 experiment adopted a 30-min heating period, wherein the power was increased to a level where a large temperature gradient was expected at the lower part of the core under actual 1 F accident conditions. Most of the control blade and channel box migrated from the original position. After heating, the simulated fuel assembly was measured by X-ray-computed tomography (CT) technology and by electron probe micro-analyzer (EPMA). CT pictures and elemental mapping demonstrated its excellent performance with rather good precision. Based on these results, an excellent perspective, in terms of applicability of the NTR-type plasma-heating technology to the SA experimental study, was obtained.
5 March 2018 in Journal of Nuclear Engineering and Radiation Science
A new experimental program using nontransfer (NTR) type plasma heating is under consideration in Japan Atomic Energy Agency (JAEA) to clarify the uncertainty on core-material relocation (CMR) behavior of boiling water reactor (BWR). In order to confirm the applicability of this new technology, authors performed preparatory plasma heating tests using small-scale test pieces (107 mm × 107 mm × 222 mm (height)). An excellent perspective in terms of applicability of the NTR plasma heating to melting high melting-temperature materials such as ZrO2 has been obtained. In addition, molten pool was formed at the middle height of the test piece indicating its capability to simulate the initial phase of core degradation behavior consistent with the real UO2 fuel PHEBUS fission products (FP) tests. Furthermore, application of electron probe micro-analyzer (EPMA), scanning electron microscope (SEM)/energy dispersive X-ray spectrometry (EDX), and X-ray computed tomography (CT) led to a conclusion that the pool formed consisted mainly of Zr with some concentration of oxygen which tended to be enhanced at the upper surface region of the pool. Based on these results, an excellent perspective in terms of applicability of the NTR plasma heating technology to the severe accident (SA) experimental study was obtained.
So far, it has been difficult to directly compare diverse characteristic gelation mechanisms over different length and time scales. This paper presents a universal water structure analysis of several gels with different structures and gelation mechanisms including polymer gels, supramolecular gels composed of surfactant micelles, and cement gels. The spatial distribution of water molecules was analyzed at molecular level from a diagram of the relaxation times and their distribution parameters (τ–β diagrams) with our database of the 10 GHz process for a variety of aqueous systems. Polymer gels with volume phase transition showed a small decrease in the fractal dimension of the hydrogen bond network (HBN) with gelation. In supramolecular gels with rod micelle precursor with amphipathic molecules, both the elongation of the micelles and their cross-linking caused a reduction in the fractal dimension. Such a reduction was also found in cement gels. These results suggest that the HBN inevitably breaks at each length scale with relative increase in steric hindrance due to cross-linking, resulting in the fragmentation of collective structures of water molecules. The universal analysis using τ–β diagrams presented here has broad applicability as a method to characterize diverse gel structures and evaluate gelation processes.
Boron carbide (B~4~C) is used as neutron absorbing material in Boiling Water Reactor (BWR)s and Fast Breeder Reactors (e.g., Fukushima Dai-ichi (1F) Nuclear Power Plant). Since the hardness of fuel debris containing boride from B~4~C pellet in control blade is estimated to be two times higher as that of oxide, such as UO~2~ and ZrO~2~, it is necessary to select an efficient and