Yuansheng Wang

Yuansheng Wang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
YWYuansheng Wang
Yuansheng Wang
ZZzhiyong Zhou
zhiyong Zhou
QLQi Liu
Qi Liu
WQWeiyang Qin
Weiyang Qin
PZPei Zhu
Pei Zhu
To harvest the energy of variable-speed wind, we proposed a dynamic multi-stable configuration composed of a piezoelectric beam and a rectangular plate. At low wind speeds, the system exhibits bi-stability, whereas, at high wind speeds, the system exhibits a dynamic tri-stability, which is beneficial for harvesting variable-speed wind energy. The theoretical analysis was carried out. For validation, the prototype was fabricated, and a piezoelectric material was bonded to the beam. The corresponding experiment was conducted, with the wind speed increasing from 1.5 to 7.5 m/s. The experiment results prove that the proposed harvester could generate a large output over the speed range. The dynamic stability is helpful to maintain snap-through motion for variable-speed wind. In particular, the snap-through motion could reach coherence resonance in a range of wind speed. Thus, the system could keep large output in the environment of variable-speed wind.

9 December 2022 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
WQWeiyang Qin
Weiyang Qin
QLQi Liu
Qi Liu
YWYuansheng Wang
Yuansheng Wang
ZXZhongliang Xie
Zhongliang Xie
ZZZhiyong Zhou
Zhiyong Zhou
In this study, we improve the performance of vibration energy harvesting by adopting a different working mode of piezoelectric material. We propose a harvester that is composed of an inverted beam and a branch structure. The branch can produce an amplified inertial force under vibration and passes it to a lead zirconate titanate (PZT) sheet. The resultant force acts on the PZT sheet as a dynamic normal force, not as a dynamic flexural one in the classical harvester. This change can increase the output significantly. First, the theoretical model is established and solved. The results show that the design can induce a super-harmonic vibration and produce a large output. Then, the validation experiments are carried out. The experimental results prove the occurrence of super-harmonic vibration and show that under weak stochastic excitation the branch structure can promote the electric output significantly. For a stochastic excitation of PSD = 0.06 g2 Hz−1, the average power of the novel harvester can reach 0.344 mW by a small PZT sheet with the dimensions of 24 × 6 × 0.2  m m 3 . This study may provide a novel scheme in improving the vibration energy harvesting efficiency.

13 April 2021 in Metals
Verified
Journal Article
Open access
PDF file
XWXiaoYan Wang
XiaoYan Wang
MLMeng Li
Meng Li
YWYuansheng Wang
Yuansheng Wang
CZChengjiang Zhang
Chengjiang Zhang
ZWzhixun Wen
zhixun Wen
Taking nickel-based single crystal superalloy DD6 as the research object, different degrees of creep damage were prefabricated by creep interruption tests, and then the creep damage was repaired by the restoration heat treatment system of solid solution heat treatment and two-stage aging heat treatment. The results show that with the creep time increasing, the alloy underwent microstructure evolution including γ′ phase coarsening, N-type rafting and de-rafting. After the restoration heat treatment, the coarse rafted γ′ phase of creep damaged specimens dissolved, precipitated, grew up, and became cubic again. Except for the specimens with creep interruption of 100 h, the γ′ phase can basically achieve the same arrangement as the γ′ phase of the original sample. The comparison of the secondary creep test shows that the steady-state creep stage of the test piece after the restoration heat treatment is relatively increased, and the total creep life can reach the same level as the primary creep life. The high temperature creep properties of the tested alloy are basically recovered, and the restoration heat treatment effect is good.

3 January 2019 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
XLXiao-Xiao Liu
Xiao-Xiao Liu
YWYuansheng Wang
Yuansheng Wang
Assessing the demand hazards of structures is requested in the framework of performance‐based earthquake engineering. An efficient method for estimating the seismic risk of structures is proposed in this paper. The relationship between multiple limit capacities and corresponding response parameters is denoted by using a generalized multidimensional limit state equation. The limit states of different components are described as random and convex mixed variables. The seismic responses of different components are considered dependent and follow a multidimensional lognormal distribution. The mathematical formula of multidimensional demand hazards of structures is then derived through combining the seismic fragility function and the seismic hazard curve. The proposed method is used to perform the demand hazard analysis and the parameter sensitivity analysis of a multispan continuous concrete girder bridge, selecting column ductility and bearing displacement as the two‐dimensional seismic response parameters obtained by Incremental Dynamic Analysis. The results demonstrate that the coefficient of variation and correlation coefficient N, which are involved in the limit state equation, have an impact on the evaluation of the demand hazards.

1 November 2018 in Discrete Dynamics in Nature and Society
Verified
Journal Article
Open access
PDF file
XLXiao-Xiao Liu
Xiao-Xiao Liu
YWYuansheng Wang
Yuansheng Wang
A new formulation on seismic risk assessment for structures with both random and uncertain-but-bounded variables is investigated in this paper. Limit thresholds are regarded as random variables. The median of random variables is described through an improved multidimensional parallelepiped (IMP) convex model, in which the uncertain domain of the dependent bounded variables can be explicitly expressed. The corresponding Engineering Demand Parameters are taken to be dependent and follow a multidimensional lognormal distribution. Through matrix transformation, a given performance function is transformed into the regularized one. An effective method based on active learning Kriging model (ALK) is introduced to approximate the performance function in the region of interest rather than in the overall uncertain space. Based on ALK model, the failure probabilities for different limit states are calculated by using Monte Carlo Simulation (MCS). Further, the failure probabilities for different limit states in 50 years can be obtained through coupling the seismic failure probability with the ground motion hazard curve. A six-story reinforced concrete building subjected to ground motions is investigated to the efficiency and accuracy of the proposed method. The interstory drift and the acceleration as two responses of the case study are, respectively, obtained by utilizing Incremental Dynamic Analysis and nonlinear history analysis.

17 November 2019
Verified
Book Chapter
Closed access
PDF file
YWYuansheng Wang
Yuansheng Wang
Chunbo LanChunbo Lan
Chunbo Lan
QWQin Weiyang
Qin Weiyang
YZYue ZhuFeng
Yue ZhuFeng