XiaoYan Wang

Dr. XiaoYan Wang

School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
XWXiaoYan Wang
XiaoYan Wang
MLMeng Li
Meng Li
ZWzhixun Wen
zhixun Wen
The as-cast alloy of nickel-based single-crystal superalloy was used as the research object. After four hours of solution treatment at 1315 °C, four cooling rates (water cooling (WC), air cooling (AC) and furnace cooling (FC1/FC2)) were used to reduce the alloy to room temperature. Four different microstructures of nickel-based superalloy material were prepared. A high-temperature tensile test at 980 °C was carried out to study the influence of various rates on the formation of the material’s microstructure and to further obtain the influence of different microstructures on the high-temperature mechanical properties of the materials. The results show that an increase of cooling rate resulted in a larger γ′ phase nucleation rate, formation of a smaller γ′ phase and a greater number. When air cooling was used, the uniformity of the γ′ phase and the coherence relationship between the γ′ phase and the γ phase were the best. At the same time, the test alloy had the best high-temperature tensile properties, and the material showed a certain degree of plasticity. TEM test results showed that the test alloy mainly blocked dislocations from traveling in the material through the strengthening effect of γ′, and that AC had the strongest hindering effect on γ′ dislocation movement.

20 March 2019 in Metals
Verified
Journal Article
Open access
PDF file
XWXiaoYan Wang
XiaoYan Wang
ZWzhixun Wen
zhixun Wen
HCHao Cheng
Hao Cheng
SGShu-Ning Gu
Shu-Ning Gu
GLGuang-Xian Lu
Guang-Xian Lu
The effects of the heating rate before solution treatment, and the cooling rate after solution treatment on the morphological distribution and evolution of the precipitation phase of nickel-based single crystal superalloy were studied. The dissolution, precipitation, and growth of the precipitation phase and the matrix phase during heat treatment were analyzed by the means of high-power scanning electron microscopy. The results show that the morphology of the precipitated phase has nothing to do with the distribution of the precipitated phase and the heating rate in the heating process, but the cooling rate in the cooling process affects the shape, size, and distribution of the precipitated phase. The faster the cooling rate, the smaller the precipitated phase is, the more irregular the shape is, the smaller the equivalent edge length is, and the smaller the channel width of the matrix phase is.

4 March 2019 in Preprints.org
Verified
Preprint
Open access
PDF file
XWXiaoYan Wang
XiaoYan Wang
ZWzhixun Wen
zhixun Wen
HCHao Cheng
Hao Cheng
The effects of heating rate before solution treatment and cooling rate after solution treatment on the morphological distribution and evolution of precipitation phase of nickel-based single crystal superalloy were studied. The dissolution, precipitation and growth of precipitation phase and matrix phase during heat treatment were analyzed by means of high power scanning electron microscopy. The results show that the morphology of precipitated phase has nothing to do with the distribution of precipitated phase and the heating rate in the heating process, but the cooling rate in the cooling process affects the shape, size and distribution of precipitated phase. The faster the cooling rate, the smaller the precipitated phase is, the more irregular the shape is, the smaller the equivalent edge length is, and the smaller the channel width of matrix phase is.

13 April 2021 in Metals
Verified
Journal Article
Open access
PDF file
XWXiaoYan Wang
XiaoYan Wang
MLMeng Li
Meng Li
YWYuansheng Wang
Yuansheng Wang
CZChengjiang Zhang
Chengjiang Zhang
ZWzhixun Wen
zhixun Wen
Taking nickel-based single crystal superalloy DD6 as the research object, different degrees of creep damage were prefabricated by creep interruption tests, and then the creep damage was repaired by the restoration heat treatment system of solid solution heat treatment and two-stage aging heat treatment. The results show that with the creep time increasing, the alloy underwent microstructure evolution including γ′ phase coarsening, N-type rafting and de-rafting. After the restoration heat treatment, the coarse rafted γ′ phase of creep damaged specimens dissolved, precipitated, grew up, and became cubic again. Except for the specimens with creep interruption of 100 h, the γ′ phase can basically achieve the same arrangement as the γ′ phase of the original sample. The comparison of the secondary creep test shows that the steady-state creep stage of the test piece after the restoration heat treatment is relatively increased, and the total creep life can reach the same level as the primary creep life. The high temperature creep properties of the tested alloy are basically recovered, and the restoration heat treatment effect is good.

1 January 2016
Verified
Conference Paper
Open access
PDF file
WXWenhao Xie
Wenhao Xie
XSXiaoqun Sun
Xiaoqun Sun
JLJinjin Liang
Jinjin Liang
XWXiaoYan Wang
XiaoYan Wang
Number and shape are the important research objects in the mathematical research. The method of combination of Number and Shape make the number and shape to produce the connection. Heuristic teaching is a kind of teaching thought that can guide students think positively step by step and learn actively according to the characteristics of the teaching content and students' knowledge and thinking level. This paper discusses the practical significance about the combination of Number and Shape in the heuristic teaching of higher mathematics. Through specific case analysis, we recognize that the use of this teaching method can make students more deeply understand the connection inside the higher mathematics knowledge, and improve the enthusiasm of students to participate in classroom teaching activities.