Optical frequency combs are revolutionizing modern time and frequency metrology. In the past years, their range of applications has increased substantially, driven by their miniaturization through microresonator-based solutions. The combs in such devices are typically generated using the third-order nonlinearity of the resonator material. An alternative approach is making use of second-order nonlinearities. While the idea of generating combs this way has been around for almost two decades, so far only few demonstrations are known, based either on bulky bow-tie cavities or on relatively low- waveguide resonators. Here, we present the first such comb that is based on a millimeter-sized microresonator made of lithium niobate, that allows for cascaded second-order nonlinearities. This proof-of-concept device comes already with pump powers as low as 2 mW, generating repetition-rate-locked combs around 1064 and 532 nm. From the nonlinear dynamics point of view, the observed combs correspond to Turing roll patterns.
Adiabatic frequency conversion has some key advantages over nonlinear frequency conversion. No threshold and no phase-matching conditions need to be fulfilled. Moreover, it exhibits a conversion efficiency of 100 % down to the single-photon level. Adiabatic frequency conversion schemes in microresonators demonstrated so far suffer either from low quality factors of the employed resonators resulting in short photon lifetimes or small frequency shifts. Here, we present an adiabatic frequency conversion (AFC) scheme by employing the Pockels effect. We use a non-centrosymmetric ultrahigh-Q microresonator made out of lithium niobate. Frequency shifts of more than 5 GHz are achieved by applying just 20 V to a 70-µm-thick resonator. Furthermore, we demonstrate that with the same setup positive and negative frequency chirps can be generated. With this method, by controlling the voltage applied to the crystal, almost arbitrary frequency shifts can be realized. The general advances in on-chip fabrication of lithium-niobate-based devices make it feasible to transfer the current apparatus onto a chip suitable for mass production.
Tunable light sources are a key enabling technology for many applications such as ranging, spectroscopy, optical coherence tomography, digital imaging and interferometry. For miniaturized laser devices, whispering gallery resonator lasers are a well-suited platform, offering low thresholds and small linewidths, however, many realizations suffer from the lack of reliable tuning. Rare-earth ion-doped lithium niobate offers a way to solve this issue. Here we present a single-frequency laser based on a neodymium-doped lithium niobate whispering gallery mode resonator that is tuned via the linear electro-optic effect. Using a special geometry, we suppress higher-order transverse modes and hence ensure single-mode operation. With an applied voltage of just 68 V, we achieve a tuning range of 3.5 GHz. The lasing frequency can also be modulated with a triangular control signal. The freely running system provides a frequency and power stability of better than and 6 %, respectively, for a 30-minute period. This concept is suitable for full integration with existing photonic platforms based on lithium niobate.
Whispering gallery resonators made out of lithium niobate allow for optical parametric oscillation and frequency comb generation employing the outstanding second-order nonlinear-optical properties of this material. An important knob to tune and control these processes is, e.g., the linear electro-optic effect, the Pockels effect via externally applied electric fields. Due to the shape of the resonators a precise prediction of the electric field strength that affects the optical mode is non-trivial. Here, we study the average strength of the electric field in z-direction in the region of the optical mode for different configurations and geometries of lithium niobate whispering gallery resonators with the help of the finite element method. We find that in some configurations almost 100% is present in the cavity compared to the ideal case of a cylindrical resonator. Even in the case of a few-mode resonator with a very thin rim we find a strength of 90%. Our results give useful design considerations for future arrangements that may benefit from the strong electro-optic effect in bulk whispering gallery resonators made out of lithium niobate.