22 May 2020 in Physical Review Letters
Optical frequency combs are revolutionizing modern time and frequency metrology. In the past years, their range of applications has increased substantially, driven by their miniaturization through microresonator-based solutions. The combs in such devices are typically generated using the third-order nonlinearity of the resonator material. An alternative approach is making use of second-order nonlinearities. While the idea of generating combs this way has been around for almost two decades, so far only few demonstrations are known, based either on bulky bow-tie cavities or on relatively low- waveguide resonators. Here, we present the first such comb that is based on a millimeter-sized microresonator made of lithium niobate, that allows for cascaded second-order nonlinearities. This proof-of-concept device comes already with pump powers as low as 2 mW, generating repetition-rate-locked combs around 1064 and 532 nm. From the nonlinear dynamics point of view, the observed combs correspond to Turing roll patterns.
21 November 2018 in Optics Letters
Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared (NIR) regime, many applications require combs at mid-infrared (MIR), visible (VIS), or even ultra-violet (UV) wavelengths. Frequency combs can be transferred to other wavelengths via nonlinear optical processes; however, this becomes exceedingly challenging for high-repetition-rate frequency combs. Here it is demonstrated that a synchronously driven high- microresonator with a second-order optical nonlinearity can efficiently convert high-repetition-rate NIR frequency combs to VIS, UV, and MIR wavelengths, providing new opportunities for microresonator and electro-optic combs in applications including molecular sensing, astronomy, and quantum optics.
22 January 2020 in Optics Express
Adiabatic frequency conversion has some key advantages over nonlinear frequency conversion. No threshold and no phase-matching conditions need to be fulfilled. Moreover, it exhibits a conversion efficiency of 100 % down to the single-photon level. Adiabatic frequency conversion schemes in microresonators demonstrated so far suffer either from low quality factors of the employed resonators resulting in short photon lifetimes or small frequency shifts. Here, we present an adiabatic frequency conversion (AFC) scheme by employing the Pockels effect. We use a non-centrosymmetric ultrahigh-Q microresonator made out of lithium niobate. Frequency shifts of more than 5 GHz are achieved by applying just 20 V to a 70-µm-thick resonator. Furthermore, we demonstrate that with the same setup positive and negative frequency chirps can be generated. With this method, by controlling the voltage applied to the crystal, almost arbitrary frequency shifts can be realized. The general advances in on-chip fabrication of lithium-niobate-based devices make it feasible to transfer the current apparatus onto a chip suitable for mass production.
1 November 2020 in APL Photonics
We investigate the threshold of χ(2) frequency comb generation in lithium niobate whispering gallery microresonators theoretically and experimentally. When generating a frequency comb via second-harmonic excitation, also commonly known as second-harmonic generation, the threshold for the onset of cascaded second-order processes leading to a comb is found to be ∼85 µW. The second-harmonic generation efficiency up to this value is in excellent agreement with a previously known theoretical framework. This framework is extended here, showing that the onset of cascaded χ(2) processes and the maximum of the second-harmonic generation efficiency coincide. The model introduced here allows us to determine the frequency comb generation threshold analytically. Furthermore, we observe that the frequency distance between the comb lines is a function of the pump power. It changes from four free spectral ranges at the oscillation threshold to one free spectral range at 590 µW.
7 February 2018 in Optical Materials Express
We present the epitaxial growth of ferroelectric potassium tantalate-niobate (KTN) thin films by pulsed laser deposition. As a result of the optimization of the deposition and the surface finishing processes, a c-axis oriented KTa0.5Nb0.5O3 thin film with homogeneous polarization phase grown on KTaO3 and an efficient KTa0.5Nb0.5O3 waveguiding thin film grown on MgO are demonstrated. The highly improved crystalline and optical quality of KTN layers grown in this work reveal the great potential of such films for integrated nonlinear optics.
1 January 2020 in APL Photonics
Eigenfrequency tuning in microresonators is useful for a range of applications including frequency-agile optical filters and tunable optical frequency converters. In most of these applications, eigenfrequency tuning is achieved by thermal or mechanical means, while a few non-centrosymmetric crystals such as lithium niobate allow for such tuning using the linear electro-optic effect. Potassium tantalate-niobate (KTa1−xNbxO3 with 0 ≤ x ≤ 1, KTN) is a particularly attractive material for electro-optic tuning purposes. It has both non-centrosymmetric and centrosymmetric phases offering outstandingly large linear as well as quadratic electro-optic coefficients near the phase transition temperature. We demonstrate whispering-gallery resonators made of KTN with quality factors of Q > 107 and electro-optic eigenfrequency tuning of more than 100 GHz at λ = 1040 nm for moderate field strengths of E = 250 V/mm. The tuning behavior near the phase transition temperature is analyzed by introducing a simple theoretical model. These results pave the way for applications such as electro-optically tunable microresonator-based Kerr frequency combs.