The massive availability of biomass generated by the common giant reed (Arundo donax L.) motivates the search for its possible industrial use for the generation of high added-value products through implementing a biorefinery approach. The literature demonstrates the potential of common cane to obtain different high-value compounds, such as levulinic acid, oligosaccharides, fermentable sugars, highly digestible fiber for animal feed, polyphenols, and natural fibers for composite materials, among others. The data shows the upward trend in Europe toward the generation of new green industries, grouped under the biorefinery concept. Therefore, this review summarizes the current knowledge on the use of Arundo to produce materials, fibers, and chemicals. Major environmental concerns related to this plant are also reviewed. Special attention has been paid to the potential use of Arundo to produce chemicals using green chemistry approaches, as a way to contribute to and advance the achievement of Sustainable Development Goals. Recommendations for future research are also outlined.

The aim of this study was to increase understanding of the mechanism and dominant drivers influencing phase separation during ram extrusion of calcium phosphate (CaP) paste for orthopaedic applications. The liquid content of extrudate was determined, and the flow of liquid and powder phases within the syringe barrel during extrusion were observed, subject to various extrusion parameters. Increasing the initial liquid-to-powder mass ratio, LPR, (0.4–0.45), plunger rate (5–20 mm/min), and tapering the barrel exit (45°–90°) significantly reduced the extent of phase separation. Phase separation values ranged from (6.22 ± 0.69 to 18.94 ± 0.69 %). However altering needle geometry had no significant effect on phase separation. From powder tracing and liquid content determination, static zones of powder and a non-uniform liquid distribution was observed within the barrel. Measurements of extrudate and paste LPR within the barrel indicated that extrudate LPR remained constant during extrusion, while LPR of paste within the barrel decreased steadily. These observations indicate the mechanism of phase separation was located within the syringe barrel. Therefore phase separation can be attributed to either; (1) the liquid being forced downstream by an increase in pore pressure as a result of powder consolidation due to the pressure exerted by the plunger or (2) the liquid being drawn from paste within the barrel, due to suction, driven by dilation of the solids matrix at the barrel exit. Differentiating between these two mechanisms is difficult; however results obtained suggest that suction is the dominant phase separation mechanism occurring during extrusion of CaP paste. Graphical Abstract

The massive biomass availability generated by the common giant reed (Arundo donaxL.) motivates the research for its possible industrial use for high-added-value products through a biorefinery approach. The literature demonstrates the potential of common cane to obtain different high-value compounds, such as levulinic acid, oligosaccharides, fermentable sugars, highly digestible fiber for animal feed, polyphenols, and natural fibers for composite materials, among others.Arundocan also provide valuable lignocellulosic fibers with an application as composite reinforcement, which is the aim of this review. The work is split into different sections: fiber obtaining, mainly done by mechanical procedures, fiber characterization (composition, thermal degradation, "mechanical properties", and crystallinity), and properties of composites with reed fiber. Most authors refer to producing board panels with insulating properties, followed by introducing reed fibers or ground materials in thermoset resins. Few papers focus on the production of thermoplastic composites withArundo, which shows the opportunity for deepening research in this area. PRISMA flowchart has been followed to perform the literature review. Different sources have been used, and retrieved results have been combined to obtain the core studies assessed in this review, evaluating the options of usingArundofibers to obtain polymer composites.