Radar-based surface soil moisture retrieval has been subject of intense research during the last decades. However, several difficulties hamper the operational estimation of soil moisture based on currently available spaceborne sensors. The main difficulty experienced so far results from the strong influence of other surface characteristics, mainly roughness, on the backscattering coefficient, which hinders the soil moisture inversion. This is especially true for single configuration observations where the solution to the surface backscattering problem is ill-posed. Over agricultural areas cultivated with winter cereal crops, roughness can be assumed to remain constant along the growing cycle allowing the use of simplified approaches that facilitate the estimation of the moisture content of soils. However, the field scale spatial variability and temporal variations of roughness can introduce errors in the estimation of soil moisture that are difficult to evaluate. The objective of this study is to assess the impact of roughness spatial variability and roughness temporal variations on the retrieval of soil moisture from radar observations. A series of laser profilometer measurements were performed over several fields in an experimental watershed from September 2004 to March 2005. The influence of the observed roughness variability and its temporal variations on the retrieval of soil moisture is studied using simulations performed with the Integral Equation Model, considering different sensor configurations. Results show that both field scale roughness spatial variability and its temporal variations are aspects that need to be taken into account, since they can introduce large errors on the retrieved soil moisture values.

Polarimetric SAR images are a rich data source for crop mapping. However, quad-pol sensors have some limitations due to their complexity, increased data rate, and reduced coverage and revisit time. The main objective of this study was to evaluate the added value of quad-pol data in a multi-temporal crop classification framework based on SAR imagery. With this aim, three RADARSAT-2 scenes were acquired between May and June 2010. Once we analyzed the separability and the descriptive analysis of the features, an object-based supervised classification was performed using the Random Forests classification algorithm. Classification results obtained with dual-pol (VV-VH) data as input were compared to those using quad-pol data in different polarization bases (linear H-V, circular, and linear 45°), and also to configurations where several polarimetric features (Pauli and Cloude–Pottier decomposition features and co-pol coherence and phase difference) were added. Dual-pol data obtained satisfactory results, equal to those obtained with quad-pol data (in H-V basis) in terms of overall accuracy (0.79) and Kappa values (0.69). Quad-pol data in circular and linear 45° bases resulted in lower accuracies. The inclusion of polarimetric features, particularly co-pol coherence and phase difference, resulted in enhanced classification accuracies with an overall accuracy of 0.86 and Kappa of 0.79 in the best case, when all the polarimetric features were added. Improvements were also observed in the identification of some particular crops, but major crops like cereals, rapeseed, and sunflower already achieved a satisfactory accuracy with the VV-VH dual-pol configuration and obtained only minor improvements. Therefore, it can be concluded that C-band VV-VH dual-pol data is almost ready to be used operationally for crop mapping as long as at least three acquisitions in dates reflecting key growth stages representing typical phenology differences of the present crops are available. In the near future, issues regarding the classification of crops with small field sizes and heterogeneous cover (i.e., fallow and grasslands) need to be tackled to make this application fully operational.

In the framework of the Copernicus Emergency Management Service (EMS) Mapping Validation, the applicability of the MultiTemporal Coherence (MTC) technique using Sentinel-1 data and the software made available by the European Space Agency (ESA), the Sentinel Application Platform (SNAP), for the detection and delineation of burnt areas was tested. The main purpose of the study was to test a methodology that would benefit from the advantages of delineating burnt areas based on radar data with respect to optical data due to its capacity to acquire data both night and day and to avoid the interference of clouds and/or smoke. Moreover, the study aimed to acheive the delineation of the burnt areas using Sentinel-1 and SNAP in the frame of an emergency mapping where processing time is constrained due to the necessity of giving a quick response to the emergency. Four Sentinel-1 images were acquired over a mountainous area mainly covered by Mediterranean vegetation that suffered from massive forest fires in the summer of 2016. The burnt area delineation was obtained by an object-based image analysis (OBIA) of the resulting MTC image followed by a visual inspection. The effects of the polarization, the acquisition mode, and the incidence angle of the synthetic aperture radar (SAR) imagery were studied in order to assess the contribution of these sensor varaibles on the results. Results of the Sentinel-1 based delineation were compared to those using optical imagery, which is traditionally used for this application. Therefore, the fire delineation that was derived was compared to that derived using three optical images: pre- and post-event Sentinel-2 images and a post-event SPOT 6 image. The first two were used to calculate the differences of the burnt area index (dBAI), used to derive the burnt area delineation by OBIA and photo interpretation with the help of the SPOT 6 image. Results of the comparison showed the feasibility of using the MTC technique for burnt area delineation, as high overall accuracy values were observed when compared to the burnt area delineation derived from optical imagery. The importance of the incidence angle of the Sentinel-1 images was assessed as well, with lower angles resulting in higher overall accuracies. In addition, the availability of double polarization of the Sentinel-1 images, allowed us to give recommendations regarding which polarization gave the best results. The potential for the use of SAR data, obtaining equivalent results to those obtained from optical imagery, is significant in an emergency context given that radar sensors acquire images continuosly and in all weather conditions.