In the framework of the Copernicus Emergency Management Service (EMS) Mapping Validation, the applicability of the MultiTemporal Coherence (MTC) technique using Sentinel-1 data and the software made available by the European Space Agency (ESA), the Sentinel Application Platform (SNAP), for the detection and delineation of burnt areas was tested. The main purpose of the study was to test a methodology that would benefit from the advantages of delineating burnt areas based on radar data with respect to optical data due to its capacity to acquire data both night and day and to avoid the interference of clouds and/or smoke. Moreover, the study aimed to acheive the delineation of the burnt areas using Sentinel-1 and SNAP in the frame of an emergency mapping where processing time is constrained due to the necessity of giving a quick response to the emergency. Four Sentinel-1 images were acquired over a mountainous area mainly covered by Mediterranean vegetation that suffered from massive forest fires in the summer of 2016. The burnt area delineation was obtained by an object-based image analysis (OBIA) of the resulting MTC image followed by a visual inspection. The effects of the polarization, the acquisition mode, and the incidence angle of the synthetic aperture radar (SAR) imagery were studied in order to assess the contribution of these sensor varaibles on the results. Results of the Sentinel-1 based delineation were compared to those using optical imagery, which is traditionally used for this application. Therefore, the fire delineation that was derived was compared to that derived using three optical images: pre- and post-event Sentinel-2 images and a post-event SPOT 6 image. The first two were used to calculate the differences of the burnt area index (dBAI), used to derive the burnt area delineation by OBIA and photo interpretation with the help of the SPOT 6 image. Results of the comparison showed the feasibility of using the MTC technique for burnt area delineation, as high overall accuracy values were observed when compared to the burnt area delineation derived from optical imagery. The importance of the incidence angle of the Sentinel-1 images was assessed as well, with lower angles resulting in higher overall accuracies. In addition, the availability of double polarization of the Sentinel-1 images, allowed us to give recommendations regarding which polarization gave the best results. The potential for the use of SAR data, obtaining equivalent results to those obtained from optical imagery, is significant in an emergency context given that radar sensors acquire images continuosly and in all weather conditions.

The Copernicus Emergency Management Service (CEMS) is coordinated by the European Commission and “provides all actors involved in the management of natural disasters, man-made emergency situations, and humanitarian crises with timely and accurate geo-spatial information derived from satellite remote sensing and complemented by available in situ or open data sources”. It includes two components, Early Warning and Monitoring and Mapping. The latter provides on demand geo-spatial information derived from satellite imagery during all phases of the disaster management cycle. It includes 3 systems, Rapid Mapping (RM), Risk and Recovery Mapping (RRM), and a Validation Service. RM provides geospatial information immediately after a disaster to assess its impact; RRM in the prevention, preparation and reconstruction phases; and the Validation Service is in charge of validating and verifying the products generated by both, and of collecting and analyzing users’ feedback. The wide spectrum of activities framed in the Validation Service has allowed it to become a vector to improve the Mapping component through the testing of new methodologies, data input type, or approach for the creation of emergency cartography in the frame of the CEMS. The present paper introduces the main investigation lines based on Sentinel-1 and 2 for flood and fire monitoring that could be implemented in the CEMS services taking into consideration the characteristics of the Mapping component in terms of products to create and time constraints. The applicability of Sentinel-1 for flood monitoring based on the backscattering, the MultiTemporal Coherence (MTC), and dual polarization; and for burnt area delineation based on MTC was studied, while Sentinel-2 was used for burnt area delineation based on vegetation indices. Results indicate that proposed methodologies might be appropriate for the creation of crisis information products in large areas, due to the relative easy and fast implementation compared to classic photo interpretation, although further applicability analyses should be carried out.

This study shows the inclusion of Sentinel-1 and Sentinel-2 images in the workflows to obtain of crisis information of different types of events and their applicability in the detection and monitoring of those events. Sentinel is an Earth Observation (EO) program that is currently being developed by the European Space Agency (ESA) in the scope of the Copernicus program operative since April 2012, formerly known as Global Monitoring for Environment and Security (GMES). This program comprises six missions, out of which three are active, Sentinel-1 that provides radar images, Sentinel-.2 providing High Resolution optical images and Sentinel-3 developed to support GMES ocean, land, atmospheric, emergency, security and cryospheric applications. The present paper describes the use of Sentinel-1 radar to detect and delineate flooded areas, and the MultiTemporal Coherence (MTC) analysis applied with pre and post-event images to delimit and monitor burnt areas and lava flows. With respect to Sentinel-2, its high spectral resolution bands allowed the delineation of burnt areas by calculating differences of vegetation and burnt indices using pre and postevent images. Results using Sentinel-1 and Sentinel-2 data were compared with results using higher spatial resolution images, both optical and radar. In all cases, the usability of Sentinel images was proven.

El Servicio de Gestión de Emergencias de Copernicus (Copernicus EMS del inglés, Copernicus Emergency Management Service) es un programa financiado con fondos públicos de la Unión Europea y coordinado por la Comisión Europea que proporciona a todos los actores involucrados en la gestión de desastres naturales, situaciones de emergencia y crisis humanitarias información geoespacial, principalmente basada en imágenes de satélite. Incluye componentes de Alerta temprana y Monitoreo, y de Mapeo con un módulo de Validación encargado de la evaluación de la calidad de los productos y el fomento de su mejora, en el marco del cual se realizó este estudio. Dentro del portafolio de productos de mapeo, los productos de clasificación de daños tienen como objetivo evaluar la intensidad y distribución espacial del daño resultante de un evento en edificios, bloques de viviendas o usos del suelo. Las categorías de daños para edificios y bloques de viviendas se definieron inicialmente con base en la Escala Macrosísmica Europea-1998 (EMS-98, del inglés European Macroseismic Scale). Este artículo muestra la función doble del módulo de validación. Por un lado, el artículo muestra los resultados de la validación de cuatro mapas de daños en edificios realizados por Copernicus EMS y por otro analiza la aptitud de la Escala Macrosísmica Europea (EMS-98), concebida para asignar daño in situ, para categorizar daño en edificios a partir de distintos tipos de imágenes (imágenes de satélite, imágenes oblicuas y ortofotos). La principal conclusión es que las categorías EMS-98 no se pueden traducir directamente para la evaluación de daños con base en imágenes de satélite y, en su lugar, se podría utilizar un enfoque operativo, en línea con estudios anteriores.