This paper proposes a multi-band coupled-fed antenna(MBCFA) design for 4G LTE, Sub-6G, and WLAN frequencies, suitable for electronic devices with different sizes and fully metallic backplates. The MBCFA structure can be replicated on the fully metallic backplates of laptops, tablets, or smartphones to form a multi-input multi-output (MIMO) antenna system. Each MBCFA at different positions on laptops and tablets exhibits similar resonance characteristics, highlighting its high robustness and stability. The proposed MBCFA is manufactured using low-cost FR4 material. The overall size of MBCFA is 70 mm × 12.5 mm and an FR4 thickness of 0.8 mm, the measured reflection losses within the -6dB range are 740-990 MHz (250 MHz bandwidth), 1380-2640 MHz (1260 MHz bandwidth), and 4250-7330 MHz (3080 MHz bandwidth). The MBCFA’s isolation levels in the 4G LTE frequency band are below -16 dB, while the remaining frequency bands have isolation levels below -20 dB. The maximum antenna gain is approximately 5 dBi, and the optimal antenna efficiency is 60%. The Equivalent Coupling Coefficient (ECC) for all frequency bands is below 0.5. Given the excellent antenna characteristics described above, the proposed multi-band coupled-fed antenna is an outstanding candidate for laptop, tablet, and smartphone antennas.
This paper proposes a Multi-Band antenna suitable for LTE and 5G NR frequency bands. The Multi-Band antenna is designed on a 60 mm × 12.5 mm FR4 substrate without requiring passive components. The Multi-Band antenna uses a Coupled-Feed structure to reach the LTE900 frequency band, while the rest of the working frequency bands are implemented using a monopole antenna. Multi-Band antennas are implemented on electronic devices like smartphones, tablets, and laptops to form Multiple-Input Multiple-Output (MIMO) systems. Each Multi-Band antenna maintains consistency in measurement and simulation, with isolation below -10 dB, showcasing its robustness. The MIMO antenna system’s envelope cross-correlation remains below 0.5 across various devices, indicating stable performance. The above characteristics validate the Multi-Band antenna’s applicability to diverse-sized portable electronics. Furthermore, Specific Absorption Rate (SAR), assessing radiation’s impact on humans, is considered. Simulations of SAR for different MIMO antenna systems near the head, hand, or leg consistently meet safety standards, ensuring that MIMO antenna systems pose no radiation threat to human health.
A GeSn metal-semiconductor-metal (MSM) photodetector is fabricated on a silicon-on-insulator (SOI) waveguide by rapid melt growth method. The Sn concentration of the GeSn photodetector is 2 % and shows a larger photo-responsivity by comparing with a pure Ge photodetector at long wavelength. The dark current is 3.7e-7 A at 5.4 V and the operation speed can be as high as 6.2 GHz.
1 October 2024 in International Journal of Microwave and Wireless Technologies
This paper introduces a method to realize beam switching by using a substrate-integrated waveguide (SIW) Butler matrix combined with a slot array antenna. The Butler matrix consists of two hybrid couplers, two crossovers, two −45-degree phase shifters, and two 0-degree phase shifters. The slot array antenna is a 4 × 2 array. The operating frequency band of the slot array antenna, where the reflection coefficient is below −10 dB, is 26.5–31.5 GHz. The measured beamforming angles from input port 1 to input Port 4 of the Butler matrix are +46, −16, +15, and −50°, respectively. The corresponding antenna gains from input Port 1 to input Port 4 are 11.57 dB, 14.284 dB, 10.94 dB, and 12.864 dB, respectively. The dimensions of the Butler matrix and the slot array antenna are 56.8 mm × 21.2 mm × 0.254 mm. The dimensions of the SIW transmission channels between the Butler matrix and input Ports 1– 4 are 16.9 mm × 34 mm × 0.254 mm.
Anomaly detection is widely used as an early-warning mechanism in CPS/ICS environments, yet detection accuracy alone does not determine whether a detector can be trusted, deployed, and operated under realistic conditions. This survey examines how recent anomaly detection approaches address these practical deployment requirements in CPS/ICS, where detectors face unique operational challenges. Following the PRISMA guidelines, a structured search and multi-stage screening across four academic databases (ACM Digital Library, IEEE Xplore, Scopus, and ScienceDirect) yielded a corpus of 26 peer-reviewed, implementation-based studies. From each study, information on method family, data modality, and datasets was extracted. Furthermore, a set of nine deployability criteria was derived from safety, security, and AI-governance standards and frameworks. Each study was then systematically assessed against these criteria using an evidence-based labeling scheme, with each criterion classified as fully, partially, or not considered based on the evidence reported in the study. The analysis shows that while detection accuracy is consistently reported, evidence for the remaining criteria is often limited or absent. These findings highlight significant gaps between reported performance and deployment readiness.