Direct nucleation control (DNC) is a process analytical technique (PAT) based model free feedback control strategy for batch and continuous crystallization processes, which has been successfully applied in numerous cases. The basic principle of DNC is the use of controlled dissolution cycles to control a measurement directly related to the particle number in the system. During DNC, in the case of cooling crystallization fines are dissolved by repeated heating–cooling loops. In this context, the controlled variable is the (relative) particle number, which is manipulated using a feedback control approach through the temperature. The particle number is traditionally measured with focused beam reflectance measurement (FBRM); however, other PAT tools can also be employed in a similar feedback control setup. Often, crystallization processes are also monitored by real-time imaging systems. In the current work a novel DNC setup is proposed in which microscopy images are captured and processed by means of image analysis in real time. The images are used to extract the relative particle number, which is controlled using the DNC framework. The robustness of the new image analysis based direct nucleation control (IA-DNC) is presented via three case studies with materials having different crystallization properties. The IA-DNC approach uses a Particle Vision probe, although other in situ or in line imaging systems can also be used in the framework. The systems are monitored with FBRM for comparison purposes. The setup achieved stable, converged control in most cases and demonstrated that the IA-DNC has several advantages over the classical FBRM based DNC. The IA-DNC can also be used for real-time feedback control of crystal shape.
This study describes an automated system used for high throughput screening of reaction conditions based on accelerated reactions occurring in small volumes of reagents. Reaction mixtures are prepared in array format using a fluid handling robot and spotted on a flat polytetrafluoroethylene plate at densities up to 6144 per plate. The reaction and analysis steps are performed simultaneously using desorption electrospray ionization (DESI) to release microdroplets containing the reaction mixture from the plate for reaction prior to arrival at a mass spectrometer. Analysis rates are up to 1 reaction mixture per second and data are recorded in real time using an ion trap mass spectrometer. Beacon compounds are used to triangulate position on the plate and this allows tandem mass spectrometry (MS/MS) to be performed on confirm products of interest. Custom software allows the user to control the system. It is also used to receive data from the DESI mass spectrometer to screen the spectra for compounds of interest, to perform MS/MS and to save data. This custom software also communicates with the software controlling the fluid handling robot (Biomek i7) as well as the Beckman software used to prepare reaction mixtures and also the software that controls the solvent used as the DESI spray. Data were recorded for N-alkylation, N-acylation and N-sulfonylation reactions in three 8 hour experiments on successive days to establish the ruggedness and repeatability of the system. Repeatability is high (94–97%) over this period with false negative 6% (depending on noise threshold chosen). Plates containing 384 reaction mixtures are analyzed in 7 min by moving the DESI sprayer in steps under the sprayer instead of continuously.