In this review, recent achievements in the application of high-entropy alloys (HEAs) and high-entropy oxides (HEOs) in the technology of solid oxide fuel cells (SOFC) are discussed for the first time. The mechanisms of the stabilization of a high-entropy state in such materials, as well as the effect of structural and charge factors on the stability of the resulting homogeneous solid solution are performed. An introduction to the synthesis methods for HEAs and HEOs is given. The review highlights such advantages of high-entropy materials as high strength and the sluggish diffusion of components, which are promising for the use at the elevated temperatures, which are characteristic of SOFCs. Application of the medium- and high-entropy materials in the hydrocarbon-fueled SOFCs as protective layers for interconnectors and as anode components, caused by their high stability, are covered. High-entropy solid electrolytes are discussed in comparison with traditional electrolyte materials in terms of conductivity. High-entropy oxides are considered as prospective cathodes for SOFCs due to their superior electrochemical activity and long-term stability compared with the conventional perovskites. The present review also determines the prioritizing directions in the future development of high-entropy materials as electrolytes and electrodes for SOFCs operating in the intermediate and low temperature ranges.

Solid oxide fuel cells (SOFCs) are efficient electrochemical devices that allow for the direct conversion of fuels (their chemical energy) into electricity. Although conventional SOFCs based on YSZ electrolytes are widely used from laboratory to commercial scales, the development of alternative ion-conducting electrolytes is of great importance for improving SOFC performance at reduced operation temperatures. The review summarizes the basic information on two representative families of oxygen-conducting electrolytes: doped lanthanum aluminates (LaAlO₃) and lanthanum gallates (LaGaO₃). Their preparation features, chemical stability, thermal behaviour and transport properties are thoroughly analyzed in terms of their connection with the target functional parameters of related SOFCs. The data presented here will serve as a starting point for further studies of La-based perovskites, including in the fields of solid state ionics, electrochemistry and applied energy.

The chemical design of new functional materials for solid oxide fuel cells (SOFCs) is of great interest as a means for overcoming the disadvantages of traditional materials. Redox stability, carbon deposition and sulfur poisoning of the anodes are positioned as the main processes that result in the degradation of SOFC performance. In this regard, double perovskite molybdates are possible alternatives to conventional Ni-based cermets. The present review provides the fundamental properties of four members: Sr₂NiMoO_6-δ, Sr₂MgMoO_6-δ, Sr₂FeMoO_6-δ and Sr₂Fe_1.5Mo_0.5O_6-δ. These properties vary greatly depending on the type and concentration of the 3d-element occupying the B-position of A₂BB’O₆. The main emphasis is devoted to: (i) the synthesis features of undoped double molybdates, (ii) their electrical conductivity and thermal behaviors in both oxidizing and reducing atmospheres, as well as (iii) their chemical compatibility with respect to other functional SOFC materials and components of gas atmospheres. The information provided can serve as the basis for the design of efficient fuel electrodes prepared from complex oxides with layered structures.