Optimization of post polymerization processes of polyolefin elastomers (POE) involving solvents is of considerable industrial interest. To this aim, experimental determination and theoretical interpretation of the thermodynamics and mass transport properties of POE-solvent mixtures is relevant. Sorption behavior of n-hexane vapor in a commercial propylene-ethylene elastomer (V8880 VistamaxxTM from ExxonMobil, Machelen, Belgium) is addressed here, determining experimentally the sorption isotherms at temperatures ranging from 115 to 140 °C and pressure values of n-hexane vapor up to 1 atm. Sorption isotherms have been interpreted using a Non Random Lattice Fluid (NRLF) Equation of State model retrieving, from data fitting, the value of the binary interaction parameter for the n-hexane/V8880 system. Both the cases of temperature-independent and of temperature-dependent binary interaction parameter have been considered. Sorption kinetics was also investigated at different pressures and has been interpreted using a Fick’s model determining values of the mutual diffusivity as a function of temperature and of n-hexane/V8880 mixture composition. From these values, n-hexane intra-diffusion coefficient has been calculated interpreting its dependence on mixture concentration and temperature by a semi-empiric model based on free volume arguments.
A lab-scale “cold” static devolatilizer is presented for investigating the dependencies of devolatilization efficiency on process parameters. O2 enriched silicon oil (10 Pa s) is chosen as model system, to simulate volatile removal in high temperature static devolatilizer. The flexibility of the apparatus is demonstrated by the continuous measurement of residual volatile content at different initial volatile concentrations, residence times, degree of vacuum and polymer flow rates. The transparent vessel allows the direct observation of the steady state foam, generated by degassing. The magnitude of inlet volatile concentration that can be fed, ranges from 102 to 103 ppm and the residence time can be changed from seconds to minutes.