Insights into the effect of die swell on extrusion foam of thermoplastic polymers are presented. The die swell or Barus effect is the swelling of a viscoelastic material due to a fast elastic recovery after being subjected to stress. The elastic recovery is proportional to the energy stored in the material during the deformation that is released immediately when the material is free to expand. In extrusion foam, the elastic recovery happens at the die exit together with the foaming process (i.e., bubble nucleation and growth). Previous reports on extrusion have focused on modeling the die swell or foaming individually. We investigated the existence of a link between the die swell and foaming that is fundamental in designing the geometry of a die for extrusion foam. Simple and complex dies were used to measure the expansion ratio of a polyethylene blown with isobutane and CO2. It was found that the expansion ratio is anisotropic, the anisotropy in the expansion of the foam is due to the die swell strongly affecting the final shape of the product, and it cannot be neglected in standard application for extrusion foam. Surprisingly, it was found that the foam density changes at a high level of die swell because it is affected by the elastic recovery of the material.
3D food printing offers precise control over the shape, texture, and nutritional profile of edible structures, enabling high customization. A key yet under‐explored feature in this field is the internal porous architecture, which significantly affects mechanical strength, texture, and overall functionality. This review examines how ingredient formulation‐particularly polysaccharides and proteins‐and printing parameters such as temperature, flow rate, velocity, and nozzle diameter influence the formation of inter‐strand macropores and intra‐strand micropores. Emphasis is placed on pore‐generation and stabilization techniques, especially freeze‐drying and emulsion templating, which enable the creation of well‐defined porous networks. The intentional design of hierarchical porosity‐combining both macro‐ and micro‐scale structures‐emerges as a promising strategy for producing lightweight, mechanically robust, and sensorially rich food products. These porous architectures can reduce raw material consumption while maintaining consumer appeal, aligning with goals of food sustainability. In this context, porosity is not merely a structural attribute but a critical design variable for optimizing performance and environmental impact. By connecting internal structure with functional outcomes, this review aims to support the development of next‐generation 3D‐printed foods that are resource‐efficient, nutritionally tailored, and aligned with sustainable production practices.
Optimization of post polymerization processes of polyolefin elastomers (POE) involving solvents is of considerable industrial interest. To this aim, experimental determination and theoretical interpretation of the thermodynamics and mass transport properties of POE-solvent mixtures is relevant. Sorption behavior of n-hexane vapor in a commercial propylene-ethylene elastomer (V8880 VistamaxxTM from ExxonMobil, Machelen, Belgium) is addressed here, determining experimentally the sorption isotherms at temperatures ranging from 115 to 140 °C and pressure values of n-hexane vapor up to 1 atm. Sorption isotherms have been interpreted using a Non Random Lattice Fluid (NRLF) Equation of State model retrieving, from data fitting, the value of the binary interaction parameter for the n-hexane/V8880 system. Both the cases of temperature-independent and of temperature-dependent binary interaction parameter have been considered. Sorption kinetics was also investigated at different pressures and has been interpreted using a Fick’s model determining values of the mutual diffusivity as a function of temperature and of n-hexane/V8880 mixture composition. From these values, n-hexane intra-diffusion coefficient has been calculated interpreting its dependence on mixture concentration and temperature by a semi-empiric model based on free volume arguments.
26 August 2024 in Journal of Colloid and Interface Science
Here we demonstrate for the first time that an antibody-gold nanoparticles (AuNPs)-polymer conjugate thin-film biosensor can easily be fabricated to selectively capture Tau protein. Gold nanoparticles (AuNPs) are employed as sensing elements, thus capitalizing on their propensity to undergo assembly or disassembly in response to the adsorption or conjugation of various biomolecules on their surface, thereby forming robust interactions with the target analyte. We show that the Tau protein in its different aggregation phases can be detected, by restricting the reaction area on the solid thin polymer film and thus reducing the diffusion effects usually encountered in immunosensors. A limit of detection (LOD) of 460 pg/mL was reached, demonstrating a great potential for detecting Tau in aggregation states. This sensor based on thin polymer film could open new routes for sensing and monitoring Tau protein in biological assays and biomedical diagnosis.
1 August 2021 in Journal of Colloid and Interface Science