The major criteria that control pile foundation design is pile bearing capacity (P_u). The load bearing capacity of piles is affected by the various characteristics of soils and the involvement of multiple parameters related to both soil and foundation. In this study, a new model for predicting bearing capacity is developed using an extreme gradient boosting (XGBoost) algorithm. A total of 200 driven piles static load test-based case histories were used to construct and verify the model. The developed XGBoost model results were compared to a number of commonly used algorithms—Adaptive Boosting (AdaBoost), Random Forest (RF), Decision Tree (DT) and Support Vector Machine (SVM) using various performance measure metrics such as coefficient of determination, mean absolute error, root mean square error, mean absolute relative error, Nash–Sutcliffe model efficiency coefficient and relative strength ratio. Furthermore, sensitivity analysis was performed to determine the effect of input parameters on P_u. The results show that all of the developed models were capable of making accurate predictions however the XGBoost algorithm surpasses others, followed by AdaBoost, RF, DT, and SVM. The sensitivity analysis result shows that the SPT blow count along the pile shaft has the greatest effect on the P_u.

Supervised learning algorithms are a recent trend for the prediction of mechanical properties of concrete. This paper presents AdaBoost, random forest (RF), and decision tree (DT) models for predicting the compressive strength of concrete at high temperature, based on the experimental data of 207 tests. The cement content, water, fine and coarse aggregates, silica fume, nano silica, fly ash, super plasticizer, and temperature were used as inputs for the models’ development. The performance of the AdaBoost, RF, and DT models are assessed using statistical indices, including the coefficient of determination (R²), root mean squared error-observations standard deviation ratio (RSR), mean absolute percentage error, and relative root mean square error. The applications of the above-mentioned approach for predicting the compressive strength of concrete at high temperature are compared with each other, and also to the artificial neural network and adaptive neuro-fuzzy inference system models described in the literature, to demonstrate the suitability of using the supervised learning methods for modeling to predict the compressive strength at high temperature. The results indicated a strong correlation between experimental and predicted values, with R² above 0.9 and RSR lower than 0.5 during the learning and testing phases for the AdaBoost model. Moreover, the cement content in the mix was revealed as the most sensitive parameter by sensitivity analysis.

During severe earthquakes, liquefaction-induced lateral displacement causes significant damage to designed structures. As a result, geotechnical specialists must accurately estimate lateral displacement in liquefaction-prone areas in order to ensure long-term development. This research proposes a Gaussian Process Regression (GPR) model based on 247 post liquefaction in-situ free face ground conditions case studies for analyzing liquefaction-induced lateral displacement. The performance of the GPR model is assessed using statistical parameters, including the coefficient of determination, coefficient of correlation, Nash–Sutcliffe efficiency coefficient, root mean square error (RMSE), and ratio of the RMSE to the standard deviation of measured data. The developed GPR model predictive ability is compared to that of three other known models—evolutionary polynomial regression, artificial neural network, and multi-layer regression available in the literature. The results show that the GPR model can accurately learn complicated nonlinear relationships between lateral displacement and its influencing factors. A sensitivity analysis is also presented in this study to assess the effects of input parameters on lateral displacement.