The conversion of CO2 into more synthetically flexible CO is an effective and potential method for CO2 remediation, utilization and carbon emission reduction. In this paper, the reaction of carbon-carbon dioxide (the Boudouard reaction) was performed in a microwave fixed bed reactor using semi-coke (SC) as both the microwave absorber and reactant and was systematically compared with that heated in a conventional thermal field. The effects of the heating source, SC particle size, CO2 flow rate and additives on CO2 conversion and CO output were investigated. By microwave heating (MWH), CO2 conversion reached more than 99% while by conventional heating (CH), the maximum conversion of CO2 was approximately 29% at 900 °C. Meanwhile, for the reaction with 5 wt% barium carbonate added as a promoter, the reaction temperature was significantly reduced to 750 °C with an almost quantitative conversion of CO2. Further kinetic calculations showed that the apparent activation energy of the reaction under microwave heating was 46.3 kJ/mol, which was only one-third of that observed under conventional heating. The microwave-assisted Boudouard reaction with catalytic barium carbonate is a promising method for carbon dioxide utilization.
Microwave (MW) heating was proven to efficiently solid-synthesize calcium carbide at 1750 °C, which was about 400 °C lower than electric heating. This study focused on the investigation of the diffusion behaviors of graphite and calcium oxide during the solid-state synthesis of calcium carbide by microwave heating and compared them with these heated by the conventional method. The phase compositions and morphologies of CaO and C pellets before and after heating were carefully characterized by inductively coupled plasma spectrograph (ICP), thermo gravimetric (TG) analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The experimental results showed that in both thermal fields, Ca and C inter-diffused at a lower temperature, but at a higher temperature, the formed calcium carbide crystals would have a negative effect on Ca diffusion to carbon. The significant enhancement of MW heating on carbon diffusion, thus on the more efficient synthesis of calcium carbide, manifested that MW heating would be a promising way for calcium carbide production, and that a sufficient enough carbon material, instead of CaO, was beneficial for calcium carbide formation in MW reactors.
Phosphorus-doped activated carbon is reported for the first time as a highly selective catalyst for n-hexane dehydroaromatization to benzene and hydrogen with 100% n-hexane conversion and 97% benzene selectivity. The weak/medium-strength acidic centres composed of (CO)(C)–P(O)(OH) units on the catalyst surface would be the catalytic active sites. This work provides a new alternative in the preparation of metal-free catalysts for the highly selective functionalization of C–H bonds of n-alkanes.
The production of vinyl chloride (VCM) by pyrolysis of 1,2-dichloroethane (DCE) is an important process in the ethylene-based poly(vinyl chloride) industry. The pyrolysis is performed at temperatures above 500 °C, gives low conversions, and has high energy consumption. We have shown that N-doped carbon catalysts give excellent performances in DCE dehydrochlorination at 280 °C. The current understanding of the active sites, mechanism, and kinetics of DCE dehydrochlorination over N-doped carbon catalysts is limited. Here, we showed that pyridinic-N on a N-doped carbon catalyst is the active site for catalytic production of vinyl chloride monomer from DCE. The results of CO2 and DCE temperature-programmed desorption experiments showed that the pyridinic-N catalytic sites are basic, and the mechanism of dehydrochlorination on a N-doped carbon catalyst involves a carbanion. A kinetic study of dehydrochlorination showed that the surface reaction rate on the N-doped carbon catalyst was the limiting step in the catalytic dehydrochlorination of DCE. This result enabled clarification of the dehydrochlorination mechanism and optimization of the reaction process. These findings will stimulate further studies to increase our understanding of the relationship between the base strength and catalytic performance. The results of this study provide a method for catalyst optimization, namely modification of the amount of pyridinic-N and the base strength of the catalyst, to increase the surface reaction rate of DCE dehydrochlorination on N-doped carbon catalysts.
About Me
Shanghai Advanced Research Institute, Chinese Academy of Sciences
Shanghai Advanced Research Institute, Chinese Academy of Sciences