The present work demonstrates the potential applicability of additive manufacturing to X-Ray refractive nano-lenses. A compound refractive lens with a radius of 5 µm was produced by the two-photon polymerization induced lithography. It was successfully tested at the X-ray microfocus laboratory source and a focal spot of 5 μm was measured. An amorphous nature of polymer material combined with the potential of additive technologies may result in a significantly enhanced focusing performance compared to the best examples of modern X-ray compound refractive lenses.
X-ray optics made of single-crystal materials are widely used at most of the X-ray sources due to the outstanding properties. The main drawback of such optics—the diffraction losses, also known as glitches of intensity in the energy spectrum of the transmitted/diffracted beam. To be able to handle this negative effect, one needs a reliable way to simulate the glitch spectrum in any configuration. Here, we demonstrate the way of precisely determining the crystallographic orientation and unit cell parameters of optical elements just from a small glitch spectrum with the consequent possibility of simulating glitches for any energy.
The highest-quality X-ray optics can be made of single-crystal materials such as silicon, germanium, or, even better, diamond. Unfortunately, such X-ray optics have one drawback: diffraction losses or the “glitch effect”. This effect manifests itself as follows: at some energies of X-rays, the intensity of the transmitted beam drops due to the fact that some crystalline planes have satisfied the diffraction condition. Diffraction losses are usually observed in spectroscopic experiments when the energy of the X-rays changes in a certain range. However, this effect might also influence any experiment using X-rays, especially at higher energies. In this paper, we propose a method to overcome the glitch problem in transmissive optics. This is achieved using small rotations of the optical element. We describe the algorithm for “glitch-free” measurements in detail and the theory behind it.