Myung-Ho Bae

Dr. Myung-Ho Bae

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2021 in npj 2D Materials and Applications
Verified
Journal Article
Open access
PDF file
BKBum-Kyu Kim
Bum-Kyu Kim
TKTae-Hyung Kim
Tae-Hyung Kim
DCDonghwan Choi
Donghwan Choi
HKHanul Kim
Hanul Kim
KWKenji Watanabe
Kenji Watanabe
MBMyung-Ho Bae
Myung-Ho Bae
The achievement of ultraclean Ohmic van der Waals (vdW) contacts at metal/transition-metal dichalcogenide (TMDC) interfaces would represent a critical step for the development of high-performance electronic and optoelectronic devices based on two-dimensional (2D) semiconductors. Herein, we report the fabrication of ultraclean vdW contacts between indium (In) and molybdenum disulfide (MoS2) and the clarification of the atomistic origins of its Ohmic-like transport properties. Atomically clean In/MoS2 vdW contacts are achieved by evaporating In with a relatively low thermal energy and subsequently cooling the substrate holder down to ~100 K by liquid nitrogen. We reveal that the high-quality In/MoS2 vdW contacts are characterized by a small interfacial charge transfer and the Ohmic-like transport based on the field-emission mechanism over a wide temperature range from 2.4 to 300 K. Accordingly, the contact resistance reaches ~600 Ω μm and ~1000 Ω μm at cryogenic temperatures for the few-layer and monolayer MoS2 cases, respectively. Density functional calculations show that the formation of large in-gap states due to the hybridization between In and MoS2 conduction band edge states is the microscopic origins of the Ohmic charge injection. We suggest that seeking a mechanism to generate strong density of in-gap states while maintaining the pristine contact geometry with marginal interfacial charge transfer could be a general strategy to simultaneously avoid Fermi-level pinning and minimize contact resistance for 2D vdW materials.

2 July 2019 in Metrologia
Verified
Journal Article
Closed access
PDF file
SGStephen P Giblin
Stephen P Giblin
AFAkira Fujiwara
Akira Fujiwara
GYGento Yamahata
Gento Yamahata
MBMyung-Ho Bae
Myung-Ho Bae
NKNam Kim
Nam Kim
MKMasaya Kataoka
Masaya Kataoka
We review recent precision measurements on semiconductor tunable-barrier electron pumps operating in a ratchet mode. Seven studies on five different designs of pumps have reported measurements of the pump current with relative total uncertainties around 10 −6 or less. Combined with theoretical models of electron capture by the pumps, these experimental data exhibits encouraging evidence that the pumps operate according to a universal mechanism, independent of the details of device design. Evidence for robustness of the pump current against changes in the control parameters is at a more preliminary stage, but also encouraging, with two studies reporting robustness of the pump current against three or more parameters in the range of ∼ to ∼ . This review highlights the need for an agreed protocol for tuning the electron pump for optimal operation, as well as more rigorous evaluations of the robustness in a wide range of pump designs.

6 June 2019 in 2D Materials
Verified
Journal Article
Closed access
PDF file
ZOZhun-Yong Ong
Zhun-Yong Ong
MBMyung-Ho Bae
Myung-Ho Bae
Understanding the physics underlying energy dissipation is necessary for the effective thermal management of devices based on two-dimensional (2D) materials and requires insights into the interplay between heat generation and diffusion in such materials. We review the microscopic mechanisms that govern Joule heating and energy dissipation processes in 2D materials such as graphene, black phosphorus and semiconducting transition metal dichalcogenides. We discuss the processes through which non-equilibrium charge carriers, created either transiently through photoexcitation or at steady state by a large electric field, undergo energy relaxation with the lattice and the substrate. We also discuss how these energy dissipation processes are affected by the device configuration (heterostructure, substrate material including hexagonal boron nitride, etc) as the use of different substrates, encapsulation, disorder, etc can introduce or remove scattering processes that change the energy relaxation pathways. Finally, we discuss how the unique carrier scattering dynamics in graphene-based vdW heterostructures can be exploited for optoelectronic applications in light emission and photodetection.

2 November 2018 in 2D Materials
Verified
Journal Article
Open access
PDF file
MRMiguel Muñoz Rojo
Miguel Muñoz Rojo
ZLZuanyi Li
Zuanyi Li
CSCharles Sievers
Charles Sievers
ABAlex Clark Bornstein
Alex Clark Bornstein
EYEilam Yalon
Eilam Yalon
EPEric Pop
Eric Pop
Step junctions are often present in layered materials, i.e. where single-layer regions meet multilayer regions, yet their effect on thermal transport is not understood to date. Here, we measure heat flow across graphene junctions (GJs) from monolayer-to-bilayer graphene, as well as bilayer to four-layer graphene for the first time, in both heat flow directions. The thermal conductance of the monolayer-bilayer GJ ranges from ~0.5 to 9.1 × 10 8 W m −2 K −1 between 50 K to 300 K. Atomistic simulations of such a GJ device reveal that graphene layers are relatively decoupled, and the low thermal conductance of the device is determined by the resistance between the two distinct graphene layers. In these conditions the junction plays a negligible effect. To prove that the decoupling between layers controls thermal transport in the junction, the heat flow in both directions was measured, showing no evidence of thermal asymmetry or rectification, within experimental error bars. For large-area graphene applications, this signifies that small bilayer (or multilayer) islands have little or no contribution to overall thermal transport.

28 October 2020 in Metrologia
Verified
Journal Article
Open access
MBMyung-Ho Bae
Myung-Ho Bae
DCDong-Hun Chae
Dong-Hun Chae
MKMun-Seog Kim
Mun-Seog Kim
BKBum-Kyu Kim
Bum-Kyu Kim
SPSuk-In Park
Suk-In Park
WKWan-Seop Kim
Wan-Seop Kim
A single electron pump was incorporated with a quantum Hall resistance and a Josephson voltage for the current evaluation in the framework of Ohm’s law. The pump current of about 60 pA level was amplified by a stable amplifier with a gain of 103 to induce a Hall voltage of about 60 mV level across a 1 MΩ Hall resistance array, which was compared with the Josephson voltage. The gain of the current amplifier was calibrated with a cryogenic current comparator bridge. For two different drive frequencies and repeated thermal cycles, the comparisons demonstrated that the pump current averaged over the first plateau was equal to ef within the combined uncertainty level of 0.3 × 10−6 (k = 1).

12 February 2018 in 2D Materials
Verified
Journal Article
Closed access
PDF file
DKDaehee Kim
Daehee Kim
HKHanul Kim
Hanul Kim
WYWan Soo Yun
Wan Soo Yun
KWKenji Watanabe
Kenji Watanabe
TTTakashi Taniguchi
Takashi Taniguchi
MBMyung-Ho Bae
Myung-Ho Bae
Understanding the energy transport by charge carriers and phonons in two-dimensional (2D) van der Waals heterostructures is essential for the development of future energy-efficient 2D nanoelectronics. Here, we performed in situ spatially resolved Raman thermometry on an electrically biased graphene channel and its hBN substrate to study the energy dissipation mechanism in graphene/hBN heterostructures. By comparing the temperature profile along the biased graphene channel with that along the hBN substrate, we found that the thermal boundary resistance between the graphene and hBN was in the range of (1–2)   × 10 −7 m 2 K W −1 from ~100 °C to the onset of graphene break-down at ~600 °C in air. Consideration of an electro-thermal transport model together with the Raman thermometry conducted in air showed that a doping effect occurred under a strong electric field played a crucial role in the energy dissipation of the graphene/hBN device up to T ~ 600 °C.