YBa2Cu3O7−δ (Y-123) bulk superconductors with the addition of (0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 wt.%) SnO2 nanoparticles were synthesised via a thermal treatment method. The influence of SnO2 addition on the superconducting properties by means of critical temperature, Tc, AC susceptibility, phase formation and microstructures, including its elemental composition analysis, were studied. Sharp superconducting transition, ∆Tc, and diamagnetic transition were obtained for all SnO2-added samples. It was observed that sample x = 0.4 with a Y-123 phase percentage of 95.8% gives the highest Tc, smallest ∆Tc, and the sharpest diamagnetic transition in the normalised susceptibility curves. The microstructure also showed an excess of Sn precipitates on the sample’s surface at x = 0.8 and above. As such, the best superconducting properties were observed at x = 0.4 SnO2 addition inside the Y-123 host sample.
La0.7Sr0.3MnO3 (LSMO) and Nd0.7Sr0.3MnO3 (NSMO) possess excellent colossal magnetoresistance (CMR). However, research work on the neodymium-based system is limited to date. A comparative study between LSMO and NSMO prepared by sol–gel and solid-state reaction methods was undertaken to assess their structural, microstructural, magnetic, electrical, and magneto-transport properties. X-ray diffraction and structure refinement showed the formation of a single-phase composition. Sol–gel-synthesised NSMO was revealed to be a sample with single crystallite grains and exhibited intriguing magnetic and electrical transport behaviours. Magnetic characterisation highlighted that Curie temperature (TC) decreases with the grain size. Strong suppression of the metal–insulator transition temperature (TMI) was observed and attributed to the magnetically disordered grain surface and distortion of the MnO6 octahedra. The electrical resistivity in the metallic region was fitted with theoretical models, and the conduction mechanism could be explained by the grain/domain boundary, electron–electron, and electron–magnon scattering process. The increase in the scattering process was ascribed to the morphology changes. Enhancement of low-field magnetoresistance (LFMR) was observed in nano-grained samples. The obtained results show that the grain size and its distribution, as well as the crystallite formation, strongly affect the physical properties of hole-doped manganites.
The effects of graphene addition on the phase formation and superconducting properties of (Bi1.6Pb0.4)Sr2Ca2Cu3O10 (Bi-2223) ceramics synthesized using the co-precipitation method were systematically investigated. Series samples of Bi-2223 were added with different weight percentages (x = 0.0, 0.3, 0.5 and 1.0 wt.%) of graphene nanoparticles. The samples’ phase formations and crystal structures were characterized via X-ray diffraction (XRD), while the superconducting critical temperatures, Tc, were investigated using alternating current susceptibility (ACS). The XRD showed that a high-Tc phase, Bi-2223, and a small low-Tc phase, Bi-2212, dominated the samples. The volume fraction of the Bi-2223 phase increased for the sample with x = 0.3 wt.% and 0.5 wt.% of graphene and slightly reduced at x = 1.0 wt.%. The ACS showed that the onset critical temperature, Tc-onset, phase lock-in temperature, Tcj, and coupling peak temperature, TP, decreased when graphene was added to the samples. The susceptibility–temperature (χ′-T) and (χ″-T) curves of each sample, where χ′ and χ″ are the real and imaginary parts of the susceptibility, respectively, were obtained. The critical temperature of the pure sample was also measured.
1 June 2009 in American Journal of Applied Sciences
The development of high-temperature superconductor (HTS) YBa2Cu3O7~δ (Y123) bulks in industrial applications were established years ago. It is one of the developments that currently attracts great attention especially in transportation, superconductor cables and wires. This study is focused on the preparation of the Y123 bulk superconductors by the thermal treatment method due to the promising ways to develop high-quality Y123 superconductors with its simplicity, low cost, and relatively low reaction temperature used during the process. Y123 were added with graphene nanoparticles (x = (0.0–1.0) wt.%). Samples were then characterized by X-ray diffraction (XRD) analysis, field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and alternating current susceptibility (ACS). It was found that Y123 confirmed that the majority of phases in all the XRD patterns was the orthorhombic crystal structure and the Pmmm space group with secondary phases belonged to Y2Ba1Cu1O5 (Y211). The highest Tc obtained when graphene nanoparticles were added in the Y123 sample was x = 1.0 wt.%, followed by x = 0.5 wt.% with 92.64 and 92.59 K, respectively. From the microstructure analysis, the average grain size significantly decreased to 4.754 µm at x = 0.5 wt.%. The addition of graphene nanoparticles had disturbed the grain growth of Y123, affecting the superconducting properties of the samples. On the other hand, the intergranular critical current density, Jcm, was found to increase with graphene nanoparticle addition and had the highest value at x = 1.0 wt.%, indicating that graphene nanoparticles acted as pinning centers in the Y123 matrix.