As modern healthcare technologies are becoming more and more common, even in rural areas, the usage of various medical equipment is also increasing. The manufacturers of this equipment play a large role in providing timely healthcare by meeting healthcare providers’ requirements by fulfilling their demands. As a manufacturer, establishing a strong collaborative supply chain (CSC) is crucial to ensure both the timely receipt of raw materials and the delivery of finished goods. The risks associated with CSCs and their interactions need to be investigated for decision-making in the CSCs. This paper presents a framework, integrated decision-making methodology based on the Delphi method and the grey-based Decision-Making Trial and Evaluation Laboratory (DEMATEL) technique. The Delphi method was applied for identifying the risk based on opinions of the industrial managers in the medical equipment manufacturing industry of India, and then the DEMATEL method was applied to evaluate the interaction among the recognised key risks in CSCs. The findings of the study reveal that disruption risk was the most influential one in CSC. This study will provide more valuable guidelines to policymakers and relevant practitioners about the risks prevailing in the rising nations towards the implementation of CSC practices, which, in turn, can lead to taking necessary steps for mitigating those risks. The proposed framework can address CSC risk and optimise, plan, monitor, and control supply chains in real-time. A sensitivity analysis was performed to analyse the robustness of the obtained results.
Ti–6Al–4V is the most commonly used titanium alloy in aerospace, marine, and biomedical applications. Due to the properties of poor machinability in conventional machining, Electrical Discharge Machining (EDM) is considered a prospective alternative for machining this strategic material. This study aims at enhancing the performance of powder mixed EDM (PMEDM) in the machining of Ti–6Al–4V with the application of two different types of powders, namely Graphite (Gr) and Titanium Oxide (TiO2) powders, with different concentrations in dielectric—kerosene. The effect of these powers and their relative quantities are studied in terms of metal removal rate (MRR), tool wear rate, Surface Roughness, and surface integrity. Machining is performed using the copper electrode and kerosene as the dielectric medium. A separate container and a submersible pump are used to limit the quantity of powder and keep the powder in suspension, respectively. Design of experiments guided by Design-Expert software is employed to minimize the number of experimental runs and develop empirical models of response parameters in terms of the variable parameters—peak current, powder type, and powder concentration. Findings indicate that TiO2 powder has a much higher effect on MRR compared to graphite powder, as the maximum MRR in the case of TiO2 powder is recorded 41.01 mm3/min against 11.98 mm3/min for graphite powder, i.e., 3.42 times higher. Similarly, the tool wear ratio for TiO2 powder is 0.0704 against 0.1219 for graphite powder at the maximum MRR, which is 1.73 times lower compared to that of graphite powder. The same ratios at the minimum MRR for TiO2 is 0.0098, and for graphite power is 0.0282, which is again 2.88 times lower compared to that of graphite powder. In terms of average surface roughness, Ra, the performance of TiO2 is far better compared to graphite powder since the maximum surface roughness attained with TiO2 powder is 3.265 μm against 9.936 μm for graphite powder at the highest MRR and the same attained at the lowest MRR are 2.228 μm and 2.411 μm for TiO2 and graphite powders respectively. The mechanism of the effects of PMEDM on surface texture has also been observed using SEM images to study the influence of powder concentration on surface morphology.
Assignment Problem corresponds with the product distribution between demand points and supply points. Many algorithms were suggested to find the optimal result. The purpose of this study is to propose an appropriate model to explore the solution to the assignment problem. This paper focuses on Hungarian Method. This study has conducted a detailed case study to find a feasible solution to the assignment problem. The computational outcomes suggested that Hungarian Method provides an optimal solution and can handle any complex scenario. The findings of this study can be used as a reference for decision-makers to mitigate production-related risk and adapted to sustainable market changes.