Sayumi Kaneko

Ms. Sayumi Kaneko


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SKSayumi Kaneko
Sayumi Kaneko
YOYuta Ozawa
Yuta Ozawa
KNKumi Nakai
Kumi Nakai
YSYuji Saito
Yuji Saito
TNTaku Nonomura
Taku Nonomura
HUHiroki Ura
Hiroki Ura
In this study, the propagation time and attenuation rate distributions of each sound source grid point (200 × 200) to a microphone of an arbitrary position across the shear layer, which are required for beamforming, were reconstructed by the reduced-order model with sparse sampling for acceleration of the computation. First, the propagation time and attenuation rate distributions, including the refraction of sound by the shear layer were calculated over 100 patterns of combinations of the wind speed and the microphone position, as training data. The dominant modes and optimum sampling points were discovered from the training data. Subsequently, data-driven sparse sampling for reconstruction was applied and the propagation time and the attenuation rate from each grid point (200 × 200) to a microphone were quickly calculated for the given microphone position and wind speed. The error of the obtained calculation result is 1% or less, and the approximation by data-driven sparse sampling is concluded to be effective.

9 September 2024 in Experiments in Fluids
Verified
Journal Article
Open access
PDF file
SKSayumi Kaneko
Sayumi Kaneko
APAlvaro del Pozo
Alvaro del Pozo
HNHiroki Nishikori
Hiroki Nishikori
YOYuta Ozawa
Yuta Ozawa
TNTaku Nonomura
Taku Nonomura
The present study applies a framework of the spatiotemporal superresolution measurement based on the total-least-squares dynamic mode decomposition, the Kalman filter and the Rauch-Tung-Striebel smoother to an axisymmetric underexpanded supersonic jet of a jet Mach number of 1.35. Dual planar particle image velocimetry was utilized, and paired velocity fields of the flow with a short time interval were obtained at a temporal resolution of 5000 Hz. High-frequency acoustic data of 200,000 Hz were simultaneously obtained. Then, the time-resolved velocity fields of the supersonic jet were reconstructed at a temporal resolution of 200,000 Hz. Also, time coefficients of dynamic modes in high temporal resolution were calculated. The correlation between time coefficients implies that the mixing promotion by screech tone causes the lift-up of the high-velocity fluid from the jet center and accelerates at the downstream side.

16 September 2024 in Mechanical Systems and Signal Processing
Verified
Journal Article
Open access
YIYuto Iwasaki
Yuto Iwasaki
YSYasuo Sasaki
Yasuo Sasaki
TNTakayuki Nagata
Takayuki Nagata
SKSayumi Kaneko
Sayumi Kaneko
TNTaku Nonomura
Taku Nonomura

1 June 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
SKSayumi Kaneko
Sayumi Kaneko
YOYuta Ozawa
Yuta Ozawa
KNK. Nakai
K. Nakai
YSYuji Saito
Yuji Saito
KAKeisuke Asai
Keisuke Asai
HUH. Ura
H. Ura
This study proposes a framework that reduces the calculation cost of sound source localization with the Amiet model, using a data-driven sparse sampling method. This method accelerates the calculation of the steering vector used in conventional beamforming. An aeroacoustic wind tunnel test was conducted in a 2 × 2 m2 low-speed wind tunnel, and the proposed method was verified. During the test, a monopole laser sound source, which does not interfere with the flow, was used, and its acoustic signals were measured using a microphone array. Next, steering vectors were reconstructed by discovering dominant modes and optimized sampling points from the training data based on the Amiet model and the modified data-driven sparse sampling method. Finally, the sound-source positions when the steering vector of the proposed model was used were compared with the positions observed when the steering vector of which all the grid points were calculated was used. The error was less than 2 mm when 16 modes were used, and the calculation time was reduced to ∼1/33 of that of the previous Amiet model.