The flow control effects of a nanosecond-pulse-driven dielectric barrier discharge plasma actuator (ns-DBDPA) in dynamic stall flow were experimentally investigated. The ns-DBDPA was installed on the leading edge of an airfoil model designed in the form of a helicopter blade. The model was oscillated periodically around 25% of the chord length. Aerodynamic coefficients were calculated using the pressure distribution, which was obtained by the measurement of the unsteady pressure by sensors inside the model. The flow control effect and its sensitivity to pitching oscillation and ns-DBDPA control parameters are discussed using the aerodynamic coefficients. The freestream velocity, the mean of the angle of attack, and the reduced frequency were employed as the oscillation parameters. Moreover, the nondimensional frequency of the pulse voltage, the peak pulse voltage, and the type and position of the ns-DBDPA were adopted as the control parameters. The result shows that the ns-DBDPA can decrease the hysteresis of the aerodynamic coefficients and a flow control effect is obtained in all cases. The flow control effect can be maximized by adopting the low nondimensional frequency of the pulse voltage.
16 April 2024 in Experimental Thermal and Fluid Science
In the present study, we organize the existing sparsity-promoting dynamic mode decomposition (DMDsp) in terms of noise robustness, propose faster optimization algorithm for DMDsp, and evaluate its characteristics. Two kinds of DMDsp, namely system-based DMDsp (sDMDsp) and observation-based DMDsp (oDMDsp), combined with three kinds of optimization algorithm, namely the fast iterative shrinkage thresholding algorithm (FISTA), the alternating direction method of multipliers (ADMM), and a greedy algorithm, are investigated. For both sDMDsp and oDMDsp, FISTA yields the shortest processing time. The processing time for sDMDsp with FISTA is shorter than that for oDMDsp with FISTA. The original data reconstruction errors for sDMDsp and oDMDsp are similar among the three optimization algorithms. The noise robustness for sDMDsp and oDMDsp is evaluated. sDMDsp and oDMDsp have similar robustness to observation noise, except for a system with large system and observation noise, for which oDMDsp outperforms sDMDsp.
The present study proposes a reservoir computing reduced-order model (RCROM) of the post-stall flow around the National Advisory Committee for Aeronautics 0015 airfoil based on the time series velocity field, and the estimation accuracy of the RCROM is evaluated compared to that of a linear reduced-order model (LROM). The data were experimentally obtained by particle image velocimetry at a chord Reynolds number of 6.4 × 104 and an angle of attack of 18°. The low-dimensional description of the velocity field can be obtained by decomposing the velocity field with a proper orthogonal decomposition (POD) technique and by employing the leading POD mode coefficients as temporal variables of the data instead of the velocity field. Reservoir computing (RC) is adopted as a nonlinear function that predicts several steps ahead of the leading POD mode coefficients. The hyperparameters of RC are tuned by Bayesian optimization, and the optimized RCROM outperforms the LROM in terms of estimation accuracy. The estimation accuracy of the RCROM can be investigated under different numbers of the predicted dominant POD modes and prediction step conditions. As a result, the RCROM shows higher estimation accuracy than the LROM.