Wendelstein 7-X (W7-X) is currently the largest optimized stellarator in operation in the world. Its main objective is to demonstrate long pulse operation and to investigate the suitability of this type of fusion device for a power plant. Maintaining the safety of the first wall is critical to achieving the desired discharge times of approximately 30 min while keeping a steady-state condition. We present a deep learning-based solution to detect the unexpected plasma-wall and plasma-object interactions, so-called hot-spots, in the images of the Event Detection Intelligent Camera (EDICAM) system. These events can pose a serious threat to the safety of the first wall, therefore, to the operation of the device. We show that sufficiently training a neural network with relatively small amounts of data is possible using our approach of mixing the experimental dataset with new images containing so-called synthetic hot-spots generated by us. Diversifying the dataset with synthetic hot-spots increases performance and can make up for the lack of data. The best performing YOLOv5 Small model processes images in 168 ms on average during inference, making it a good candidate for real-time operation. To our knowledge, we are the first ones to be able to detect events in the visible spectrum in stellarators with high accuracy, using neural networks trained on small amounts of data while achieving near-real-time inference times.
The detachment regime has a high potential to play an important role in fusion devices on the road to a fusion power plant. Complete power detachment has been observed several times during the experimental campaigns of the Wendelstein 7-X (W7-X) stellarator. Automatic observation and signaling of such events could help scientists to better understand these phenomena. With the growing discharge times in fusion devices, machine learning models and algorithms are a powerful tool to process the increasing amount of data. We investigate several classical supervised machine learning models to detect complete power detachment in the images captured by the Event Detection Intelligent Camera System (EDICAM) at the W7-X at each given image frame. In the dedicated detached state the plasma is stable despite its reduced contact with the machine walls and the radiation belt stays close to the separatrix, without exhibiting significant heat load onto the divertor. To decrease computational time and resources needed we propose certain pixel intensity profiles (or intensity values along lines) as the input to these models. After finding the profile that describes the images best in terms of detachment, we choose the best performing machine learning algorithm. It achieves an F1 score of 0.9836 on the training dataset and 0.9335 on the test set. Furthermore, we investigate its predictions in other scenarios, such as plasmas with substantially decreased minor radius and several magnetic configurations.
Filaments are studied by examining fast camera images on the Wendelstein 7-X stellarator. Fast cameras offer a unique perspective, revealing the complex 3D structure of filaments in the entire poloidal cross-section of the plasma. By correlating individual pixels, their location, shape, and movement are analyzed in standard and high-ι configurations. The presence of filaments is not uniform poloidally around. The number of active areas matches the number of magnetic islands in both configurations. Filaments are found to extend to multiple toroidal turns in standard configuration. No time delay is observed between the different toroidal sections. Such behavior is not seen in high-ι configuration. Filaments are observed within and without the edge shear layer, indicated by the direction of their poloidal rotation. Inside the shear layer, their velocity scatters around 1.25 km s−1, accompanied by a lifetime between 80 and 120 µs. Outside, their velocity shows greater absolute values and variance, but still in a few km s−1 range. The similarities and differences between the two configurations are discussed and compared to previous results.
Transient phenomena and their control are of high relevance in magnetic confinement fusion plasmas to guarantee a stable and safe plasma operation. Interpretative simulations can maximize the insights gained from experiments on present machines and predictive simulations can help in the preparation of design, mitigation techniques and operational scenarios for future devices. In this article, we provide an overview of recent advances and novel scientific results obtained with the 3D non-linear hybrid fluid-kinetic code JOREK, covering physics of plasma transients from the core to the scrape-off layer (SOL) both for tokamak and stellarator devices. Substantial progress was made in the physics understanding, model validation with experiments and experiment interpretation, thus, giving confidence for predictions to devices like DTT, ITER and DEMO. The topics addressed comprise a wide range: the edge physics of new operation scenarios and edge localized mode suppression; major disruptions with a focus on runaway electrons and vertical displacement events as well as disruption mitigation by shattered pellet injection; the physics mechanisms and operational limits of the flux pumping regime for sawtooth control; MHD limits of stellarators and work towards incorporating advanced edge/SOL/exhaust dynamics; continuing improvements of the code for more efficient hybrid simulations on conventional and accelerated high performance computing architectures.
Future large-scale magnetic confinement fusion reactors require operational regimes that can avoid extreme heat fluxes onto the plasma-facing components. One promising regime is the X-point radiator (XPR), which relies on a highly radiative, cold, and dense plasma volume forming above the X-point, and which can be accessed via impurity seeding. Experimentally, the height of the XPR can be controlled by adjusting the seeding rate and heating power. This contribution presents axisymmetric (2D) simulations of the XPR regime in ASDEX Upgrade using the nonlinear MHD code JOREK extended with a kinetic particle framework for the main species neutrals and nitrogen impurities. With the time-dependent simulations, the progression from attached divertors to a complete detachment with the XPR formation is shown, highlighting the effects of the neutrals and impurities separately. Amid this progression, the formation and the loss of the high-field-side high-density are observed. After the XPR is well-formed at the height of 6.8 cm, the fueling and seeding rates are adjusted so that the XPR remains stationary. From the stationary case, the seeding rate is then changed to see how the XPR location reacts. By increasing and decreasing the seeding rate, the XPR responds by moving upward and downward, respectively. These simulations show JOREK's capability of simulating time-varying XPR, which will provide a baseline for the transition to 3D simulations, so the MHD activities and their interaction with the XPR can be studied.
The aim of our work is to develop a heavy metal detection sensor that can be used in the field to easily and accurately test water samples at the range of the strict concentration levels set by international standards. The sensor is based on a gold thin-film electrode on a silicon substrate and a genetically modified bacterial flagellin protein deposited onto the gold thin-film electrode. To ensure that the surface is adequately covered, and the protein is attached to the electrode, additional gold nanoparticles were deposited to the surface. Changes on the sensor surface were investigated by in-situ ellipsometry and cyclic voltammetry. The determination of the exact surface morphology, as well as the validation of the ellipsometric measurements were done by using scanning electron microscope.