Ramy  El-Bashar

Mr. Ramy El-Bashar


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 October 2023 in Solid-State Electronics
Verified
Journal Article
Closed access
CDChengyi Duan
Chengyi Duan
MZMinglin Zhao
Minglin Zhao
RERamy El-Bashar
Ramy El-Bashar
SOS.S.A. Obayya
S.S.A. Obayya
MHMohammed Hameed
Mohammed Hameed
JDJun Dai
Jun Dai

3 October 2024 in Physica Scripta
Verified
Journal Article
Closed access
ASAhmed Fathi Salem
Ahmed Fathi Salem
RERamy El-Bashar
Ramy El-Bashar
SESanaa M El-Rabaie
Sanaa M El-Rabaie
HAHamdy Abdelhamid
Hamdy Abdelhamid
Mohamed Farhat O. HameedMohamed Farhat O. Hameed
Mohamed Farhat O. Hameed
SOS. S. A. Obayya
S. S. A. Obayya
MAPbI3 perovskite-based solar cell (PSC) has attracted much attention due to its high absorption rate. The top flat electrode degrades the behavior of PSC due to limiting the light reached to the absorber layer, which reduces the efficiency. In this study, the influence of texturing the top FTO electrode surface with a triangular saw-tooth grating on both the optical and electrical performance is reported. The interference effects are also considered in this work by modeling the PSC structure as a Fabry–Perot resonator. In this regard, the finite difference time domain method is utilized to precisely simulate the optical characteristics of the nano-structural design. Also, the optical behavior of PSC is studied at different triangular grating (TG) structures and dimensions at which the light absorption is maximized. Furthermore, the effect of absorber thickness and defect density on the optoelectronic performance is investigated. We configured the conversion efficiency (η) of the proposed PSC structure by using the bulk and Langevin recombination mechanisms. The proposed grating structure enhances the light coupling, and hence the light absorption and the generated current density are increased. For absorber thickness of 350 nm, we reported a maximum conversion efficiency (η) of 19.5% for the proposed triangular grating (TG) structure with an enhancement of 19.6% compared to the structure with a flat FTO layer. As the defect density is increased from 1012 cm−3 to 1018 cm−3, the efficiency of the optimum TG PSC is reduced from 19.5% to 10.1%, respectively. The simulation results, therefore, contribute to the understanding of the PSC-based MAPbI3 design and can be used to improve its physical behavior.

13 January 2026 in Sensors
Verified
Journal Article
Open access
PDF file
Ahmed Abdelhady A. KhalilAhmed Abdelhady A. Khalil
Ahmed Abdelhady A. Khalil
AKAbdallah Karmalawi
Abdallah Karmalawi
Moamen R. A. ElsayedMoamen R. A. Elsayed
Moamen R. A. Elsayed
RERamy El-Bashar
Ramy El-Bashar
HAHamdy Abdelhamid
Hamdy Abdelhamid
Mohamed Farhat O. HameedMohamed Farhat O. Hameed
Mohamed Farhat O. Hameed
Near-infrared (NIR) photodetectors are essential for LiDAR, optical communication, and sensing technologies requiring fast response and low power consumption. This work reports a PN photodiode incorporating a co-sputtered MoS2–Al2O3 composite layer to enhance NIR photoresponse for LiDAR and environmental sensing applications. The composite layer improves device performance through defect passivation, dielectric screening, and modified carrier transport behavior. Under 100 mW·cm−2 illumination at 4 V, the device delivers a photocurrent of 10 mA with a response time of 155 µs, corresponding to an approximately threefold (~300%) improvement compared to a reference structure. Spectral measurements show peak responsivity at 970 nm with extended sensitivity up to 1100 nm. These results indicate that embedding Al2O3 within the MoS2 improves the MoS2/Si interface and facilitates infrared photon absorption in the Si substrate, leading to enhanced vertical carrier collection and reduced recombination compared with conventional surface-passivated MoS2/dielectric layers-based devices. The proposed device demonstrates a low-cost, broadband photodiode architecture suitable for eye-safe LiDAR and environmental monitoring applications.