Synthetic bone graft substitutes have attracted increasing attention in tissue engineering. This study aimed to fabricate a novel, bioactive, porous scaffold that can be used as a bone substitute. Strontium and zinc doped nano-hydroxyapatite (Sr/Zn n-HAp) were synthesized by a water-based sol-gel technique. Sr/Zn n-HAp and poly (lactide-co-glycolide) (PLGA) were used to fabricate composite scaffolds by supercritical carbon dioxide technique. FTIR, XRD, TEM, SEM, and TGA were used to characterize Sr/Zn n-HAp and the composite scaffolds. The synthesized scaffolds were adequately porous with an average pore size range between 189 to 406 µm. The scaffolds demonstrated bioactive behavior by forming crystals when immersed in the simulated body fluid. The scaffolds after immersing in Tris/HCl buffer increased the pH value of the medium, establishing their favorable biodegradable behavior. ICP-MS study for the scaffolds detected the presence of Sr, Ca, and Zn ions in the SBF within the first week, which would augment osseointegration if implanted in the body. nHAp and their composites (PLGA-nHAp) showed ultimate compressive strength ranging between 0.4–19.8 MPa. A 2.5% Sr/Zn substituted nHAp-PLGA composite showed a compressive behavior resembling that of cancellous bone indicating it as a good candidate for cancellous bone substitute.

Bacterial infection associated with bone grafts is one of the major challenges that can lead to implant failure. Treatment of these infections is a costly endeavor; therefore, an ideal bone scaffold should merge both biocompatibility and antibacterial activity. Antibiotic-impregnated scaffolds may prevent bacterial colonization but exacerbate the global antibiotic resistance problem. Recent approaches combined scaffolds with metal ions that have antimicrobial properties. In our study, a unique strontium/zinc (Sr/Zn) co-doped nanohydroxyapatite (nHAp) and Poly (lactic-co-glycolic acid) -(PLGA) composite scaffold was fabricated using a chemical precipitation method with different ratios of Sr/Zn ions (1%, 2.5%, and 4%). The scaffolds’ antibacterial activity against Staphylococcus aureus were evaluated by counting bacterial colony-forming unit (CFU) numbers after direct contact with the scaffolds. The results showed a dose-dependent reduction in CFU numbers as the Zn concentration increased, with 4% Zn showing the best antibacterial properties of all the Zn-containing scaffolds. PLGA incorporation in Sr/Zn-nHAp did not affect the Zn antibacterial activity and the 4% Sr/Zn-nHAp-PLGA scaffold showed a 99.7% bacterial growth inhibition. MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) cell viability assay showed that Sr/Zn co-doping supported osteoblast cell proliferation with no apparent cytotoxicity and the highest doping percentage in the 4% Sr/Zn-nHAp-PLGA was found to be ideal for cell growth. In conclusion, these findings demonstrate the potential for a 4% Sr/Zn-nHAp-PLGA scaffold with enhanced antibacterial activity and cytocompatibility as a suitable candidate for bone regeneration.

In the present study, soybean peroxidase (SBP) was covalently immobilized onto two functionalized photocatalytic supports (TiO₂ and ZnO) to create novel hybrid biocatalysts (TiO₂-SBP and ZnO-SBP). Immobilization caused a slight shift in the pH optima of SBP activity (pH 5.0 to 4.0), whereas the free and TiO₂-immobilized SBP showed similar thermal stability profiles. The newly developed hybrid biocatalysts were used for the degradation of 21 emerging pollutants in the presence and absence of 1-hydroxy benzotriazole (HOBT) as a redox mediator. Notably, all the tested pollutants were not equally degraded by the SBP treatment and some of the tested pollutants were either partially degraded or appeared to be recalcitrant to enzymatic degradation. The presence of HOBT enhanced the degradation of the pollutants, while it also inhibited the degradation of some contaminants. Interestingly, TiO₂ and ZnO-immobilized SBP displayed better degradation efficiency of a few emerging pollutants than the free enzyme. Furthermore, a combined enzyme-chemical oxidation remediation strategy was employed to degrade two recalcitrant pollutants, which suggest a novel application of these novel hybrid peroxidase-photocatalysts. Lastly, the reusability profile indicated that the TiO₂-SBP hybrid biocatalyst retained up to 95% degradation efficiency of a model pollutant (2-mercaptobenzothiazole) after four consecutive degradation cycles.