Kyunghwan Kim

Mr. Kyunghwan Kim

Pohang University of Science and Technology (POSTECH)
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 August 2021 in Science Advances
Verified
Journal Article
Open access
HHHyejin Hwang
Hyejin Hwang
MKMinsik Kong
Minsik Kong
KKKyunghwan Kim
Kyunghwan Kim
DPDoowon Park
Doowon Park
SLSangyeop Lee
Sangyeop Lee
UJUnyong Jeong
Unyong Jeong
Microparticle aligned-stretchable anisotropic conductive film enables high-resolution stretchable circuit lines to interconnect.

4 January 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KKKyunghwan Kim
Kyunghwan Kim
ICInho Choi
Inho Choi
KLKANGSEOP LEE
KANGSEOP LEE
SCSeung-Uk Choi
Seung-Uk Choi
JKJiseul Kim
Jiseul Kim
HSHo-Jin Song
Ho-Jin Song
Stacked-FET topology is analyzed to increase the output power of a power amplifier (PA) in the millimeter-wave (mm-wave) band. In the mm-wave band, parasitic capacitances of the transistor severely degrade stacking efficiency due to the phase mismatch between stacked FETs. The phase-compensation (PC) inductances, including the losses of the inductor for the best stacking efficiency, are presented in both series and shunt connections. From this analysis, a triple-stacked-FET PA is designed in the $F$ -band. Proper PC series or shunt inductor types are used between the first and second stacked FETs and between the second and third stacked FETs in consideration of the core layout and inductor size. The PA is fabricated in the 28-nm CMOS fully depleted silicon-on-insulator (FD-SOI) process. With a compact core area of 0.054 mm $^{2}$ , the PA achieves peak $P_{\mathrm{SAT}}$ and PAE $_{\mathrm{MAX}}$ of 15.1 dBm and 18.6%, respectively.

24 March 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
KLKANGSEOP LEE
KANGSEOP LEE
KKKyunghwan Kim
Kyunghwan Kim
GSGibeom Shin
Gibeom Shin
HSHo-Jin Song
Ho-Jin Song
We present a 40-nm CMOS 70-GHz frequency quadrupler based on a phase-controlled push-push (PCPP) topology that provides high efficiency and harmonic suppression. Since MOSFETs in the PCPP stack turn off alternately, the quadrupler can provide high energy efficiency even for fourth-order frequency multiplication. One major problem related to even-order harmonic suppression was mitigated by using a transformer-based output amplifier with no degradation in energy efficiency. The fabricated quadrupler provides the 3-dB bandwidth and peak output power of 65.6-75.2 GHz and -0.2 dBm at 70 GHz, respectively, with an 8.9-dBm fundamental input power. The peak dc-to-RF efficiency was measured to be 8.3% with 11.4-mW dc power consumption, including an output amplifier. At 70 GHz, measured harmonic suppression was around 51.1, 41.0, and 43.1 dBc at first, second, and third harmonic frequencies, respectively.

31 August 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Open access
DLDongyoon Lee
Dongyoon Lee
GSGibeom Shin
Gibeom Shin
SLSeunghoon Lee
Seunghoon Lee
KKKyunghwan Kim
Kyunghwan Kim
TOTae-Hyun Oh
Tae-Hyun Oh
HSHo-Jin Song
Ho-Jin Song
Rich experience and intuition play important roles in designing planar transformers (TFs) for contemporary radio frequency integrated circuits (RFICs). In general, RFIC designers have been heavily relying on multiple iterations of full electromagnetic (EM) simulations, which consumes much time and effort. Here, we propose an automated matching circuit synthesizer (AMCS) using neural networks (NNs). The proposed AMCS directly synthesizes a matching circuit combined with a TF throughout the entire design process, ranging from the desired performance to layout. In the AMCS, which is a “spec-to-layout” synthesizer, one NN returns physical parameters of matching circuits, and another NN estimates the electrical performance in two-port $S$ -parameters from the desired impedances. Before the NNs are trained, input feature design is conducted to avoid the one-to-many problem, which cannot be well characterized with an inverse NN. This significantly reduces the time and effort for iterative circuit and EM simulations. The AMCS generated the matching circuit layouts for simple single-stage amplifiers operating at different frequencies up to 70 GHz or in different bandwidths of up to 32.5%. The estimated $S$ -parameters of the amplifiers show good agreement with the EM simulation results.

29 April 2022 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
MZMohammad Javad Zavarei
Mohammad Javad Zavarei
KKKyunghwan Kim
Kyunghwan Kim
HSHo-Jin Song
Ho-Jin Song
This letter presents a wideband two-stage full Ka-band power amplifier (PA) with transformer-based matching networks (TMNs) in 28-nm CMOS fully depleted silicon on insulator (FD-SOI) technology. By considering the loss of the transformer, which has usually been ignored in previous works, methods to compensate for the nonflat gain in TMNs are studied and based on that, the initial guess for wideband TMNs design is extracted. Wideband performance in terms of gain and output power is delivered by designing wideband TMNs in the PA design and frequency-independent optimum load selection for the power cell. Measurement results show that the PA achieves 19 dB maximum gain with 13.8 GHz (42%) 3-dB bandwidth (BW), 16.1 dBm $\text{P}_{\mathbf {out-1dB}}$ with 13 GHz 1-dB BW, 17.1 dBm $\text{P}_{\mathbf {sat}}$ with 12 GHz 1-dB BW, and 25.3% peak power-added efficiency.

27 January 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JKJiseul Kim
Jiseul Kim
CCChan-Gyu Choi
Chan-Gyu Choi
KLKANGSEOP LEE
KANGSEOP LEE
KKKyunghwan Kim
Kyunghwan Kim
SCSeung-Uk Choi
Seung-Uk Choi
HSHo-Jin Song
Ho-Jin Song
We present a novel high-gain broadband $G_{\mathrm{max}}$ -core amplifier with a T-shaped passive embedding network consisting of two series capacitors and one shunt inductor. The proposed $G_{\mathrm{max}}$ -core has dual-peak properties. By staggering dual-peak $G_{\mathrm{max}}$ -cores, a broad gain–bandwidth amplifier can be achieved with a small number of stages. In addition, the three elements of the T-shaped network give us a high degree of freedom in design. One can design not only the gain profile of the core but also the input and output impedance as desired with the embedding network. In this article, the proposed $G_{\mathrm{max}}$ -core is theoretically analyzed. A three-stage D-band dual-peak $G_{\mathrm{max}}$ -core amplifier is implemented in a 28-nm FDSOI CMOS process to demonstrate the idea. The fabricated amplifier offers a peak small-signal gain and bandwidth of 14.5 dB and 26 GHz (117–143 GHz), respectively, with the power consumption of 21.6 mW. This work shows a reasonable gain–bandwidth product per power dissipation among state-of-the-art amplifiers operating at similar frequencies.