Jiseul Kim

Jiseul Kim

Auto-generated profile, based on publicly available information

Jiseul Kim

Department of Electrical Engineering, Pohang University of Science and Technology, Pohang, South Korea

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KKKyunghwan Kim
Kyunghwan Kim
ICInho Choi
Inho Choi
KLKANGSEOP LEE
KANGSEOP LEE
SCSeung-Uk Choi
Seung-Uk Choi
JKJiseul Kim
Jiseul Kim
HSHo-Jin Song
Ho-Jin Song
Stacked-FET topology is analyzed to increase the output power of a power amplifier (PA) in the millimeter-wave (mm-wave) band. In the mm-wave band, parasitic capacitances of the transistor severely degrade stacking efficiency due to the phase mismatch between stacked FETs. The phase-compensation (PC) inductances, including the losses of the inductor for the best stacking efficiency, are presented in both series and shunt connections. From this analysis, a triple-stacked-FET PA is designed in the $F$ -band. Proper PC series or shunt inductor types are used between the first and second stacked FETs and between the second and third stacked FETs in consideration of the core layout and inductor size. The PA is fabricated in the 28-nm CMOS fully depleted silicon-on-insulator (FD-SOI) process. With a compact core area of 0.054 mm $^{2}$ , the PA achieves peak $P_{\mathrm{SAT}}$ and PAE $_{\mathrm{MAX}}$ of 15.1 dBm and 18.6%, respectively.

27 January 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JKJiseul Kim
Jiseul Kim
CCChan-Gyu Choi
Chan-Gyu Choi
KLKANGSEOP LEE
KANGSEOP LEE
KKKyunghwan Kim
Kyunghwan Kim
SCSeung-Uk Choi
Seung-Uk Choi
HSHo-Jin Song
Ho-Jin Song
We present a novel high-gain broadband $G_{\mathrm{max}}$ -core amplifier with a T-shaped passive embedding network consisting of two series capacitors and one shunt inductor. The proposed $G_{\mathrm{max}}$ -core has dual-peak properties. By staggering dual-peak $G_{\mathrm{max}}$ -cores, a broad gain–bandwidth amplifier can be achieved with a small number of stages. In addition, the three elements of the T-shaped network give us a high degree of freedom in design. One can design not only the gain profile of the core but also the input and output impedance as desired with the embedding network. In this article, the proposed $G_{\mathrm{max}}$ -core is theoretically analyzed. A three-stage D-band dual-peak $G_{\mathrm{max}}$ -core amplifier is implemented in a 28-nm FDSOI CMOS process to demonstrate the idea. The fabricated amplifier offers a peak small-signal gain and bandwidth of 14.5 dB and 26 GHz (117–143 GHz), respectively, with the power consumption of 21.6 mW. This work shows a reasonable gain–bandwidth product per power dissipation among state-of-the-art amplifiers operating at similar frequencies.

1 September 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
SCSeung-Uk Choi
Seung-Uk Choi
SBSirous Bahrami
Sirous Bahrami
ICInho Choi
Inho Choi
JKJiwon Kang
Jiwon Kang
JKJiseul Kim
Jiseul Kim
HSHo-Jin Song
Ho-Jin Song

13 April 2026 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
KLKANGSEOP LEE
KANGSEOP LEE
SBSirous Bahrami
Sirous Bahrami
KKKyunghwan Kim
Kyunghwan Kim
JKJiseul Kim
Jiseul Kim
SCSeung-Uk Choi
Seung-Uk Choi
HSHo-Jin Song
Ho-Jin Song
Recent demonstrations have highlighted that drone swarm Synthetic Aperture Radar (SAR) systems can efficiently cover wide areas while providing enhanced angular diversity for improved ground target information. While frequency-modulated continuous-wave (FMCW) radar systems support both monostatic and multistatic modes, drone-borne radar is typically limited to a monostatic configuration due to significant synchronization challenges. Effective synchronization between transmitters (TXs) and receivers (RXs) is, therefore, essential for multistatic imaging. This work presents a multistatic FMCW radar transceiver (TRX) that uses separate E- and Ka-bands for radar and wireless synchronization, with integrated RF switches enabling conversion between its monostatic and multistatic modes. In multistatic modes, the synchronization chirp signal can be transmitted from the leader to multiple follower modules or relayed by being retransmitted from one follower to another in a daisy-chain configuration. The radar TRX is fabricated in a 28-nm CMOS process, with the chip occupying a total area of 2.88 mm2. The complete module measures $13\times 10.6$ cm and integrates microstrip comb-line antennas for radar with planar Yagi-Uda arrays for synchronization. It achieves a measured EIRP of over 14dBm. Finally, multistatic measurements demonstrated successful target detection up to 35 m, with multistatic tests confirming reliable operation for modules spaced as far as 10 m apart in a daisy-chain configuration.