The changes in the shape and size of vines during the growing season require a continuous adjustment of the applied dose to optimize spray application efficiency. Target detection with ultrasonic sensors can be used to adapt the applied dose following the principles of the variable rate technology. A multi-nozzle air-blast sprayer was fitted with three ultrasonic sensors and three electro-valves, to modify the flow rate from the nozzles in real time, in relation to the variability of crop width. A constant application rate of 300 l ha−1 was compared with a variable rate application using the tree row volume principle at a 0.095 l m−3 canopy. The total flow rate sprayed by the nozzles was modified according to the variations of crop width measured by the ultrasonic sensors. On average 58% less liquid was applied compared to the constant rate application, with similar deposition on leaves with both treatments. A detailed analysis of savings indicates differences between the lower, middle and top part of the crop, in accordance with the leaf area distribution with crop height. No significant differences between treatments were detected in uniformity of liquid distribution and capability to reach the inner parts of the crop. This important reduction in spray volume could be followed by an equivalent reduction of plant protection products but further research work is needed to guarantee biological efficacy of a reduced dose.This work was funded by the Spanish Ministry of Education and Science, and it is part of the funded research project AGL2002-04260-C04-0

Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (C_VU) values measured with ultrasonic sensors and leaf area index, LAI (R² = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R² = 0.52). Laser measurements of crop height (C_HL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed.

Site-specific management of crops represents an important improvement in terms of efficiency and efficacy of the different labours, and its implementation has experienced a large development in the last decades, especially for field crops. The particular case of the spray application process for what are called “specialty crops” (vineyard, orchard fruits, citrus, olive trees, etc.) represents one of the most controversial and influential actions directly related with economical, technical, and environmental aspects. This study was conducted with the main objective to find possible correlations between data obtained from remote sensing technology and the actual canopy characteristics. The potential correlation will be the starting point to develop a variable rate application technology based on prescription maps previously developed. An unmanned aerial vehicle (UAV) equipped with a multispectral camera was used to obtain data to build a canopy vigour map of an entire parcel. By applying the specific software DOSAVIÑA^®, the canopy map was then transformed into a practical prescription map, which was uploaded into the dedicated software embedded in the sprayer. Adding to this information precise georeferenced placement of the sprayer, the system was able to modify the working parameters (pressure) in real time in order to follow the prescription map. The results indicate that site-specific management for spray application in vineyards result in a 45% reduction of application rate when compared with conventional spray application. This fact leads to a equivalent reduction of the amount of pesticide when concentration is maintained constant, showing once more that new technologies can help to achieve the goal of the European legislative network of safe use of pesticides.