In this article, a method to improve refractive index (RI) sensitivity of single‐mode–no core–single‐mode fiber (SNS) sensor structure is addressed by optimization of geometric parameters of no-core fiber (NCF), which could be used to accurately measure the irreversible deformation of the battery expansion state caused by temperature change. From the perspective of temperature changing RI of the electrolyte solution, the impacts of diameter, length, and waveband on the performance of the fiber sensor have been discussed as RI measurement range is 1.340–1.390. After optimization, RI sensitivity can reach approximately 2,252.7 and 2037.3 nm/RIU with the length of 6.55 and 6.75 mm when the RI is from 1.380 to 1.390.
This paper proposes a star-bus topology optic fiber sensor network with an efficient mechanism for network communication to accomplish monitoring and protection operations. The master node scans each channel for its healthy conditions with an N * M optical switch, just as in time-division multiplexing, accomplishing a comprehensive monitoring of the whole sensor network. In addition, we analyze the impact of structural parameters on network robustness, then obtain a basic design principle of network topology. We also demonstrate the proposed network’s feasibility by multiplexing different fiber sensor systems simultaneously; in addition, an optimized structure is proposed to accomplish the measurement in extreme environments and proved to be effective.
To improve the measurement accuracy of Raman distributed temperature sensors (RDTS) in a simplified and efficient manner has always been of paramount importance. Based on the characteristics of Raman backscattered light, this paper proposes a new demodulation optimization method based on multiple compensations and linear fitting, which effectively improves the measurement accuracy of RDTS. Merely describing the relationship between temperature and Raman light intensity ratio through a linearly fitted relational expression does not result in high measurement accuracy. Moreover, when the system operates for a long time, the sensing curve may shift as the reference temperature rises due to the structure of the calibration module. To address these issues, we have added two techniques based on linear fitting: proportional coefficients adjustment algorithm and reference temperature offset compensation. Firstly, we use the proportional coefficients adjustment algorithm to solve the problem of insufficient temperature response in the linear model. Then, we address the issue of sensing curve shifts through reference temperature offset compensation model. Finally, this method has achieved great results, improving the measurement accuracy of the sensing system from ±7.8°C to ±0.8°C within a 2.4km measurement range.
Quantum computing promises to enhance machine learning and artificial intelligence. Different quantum algorithms have been proposed to improve a wide spectrum of machine learning tasks. Yet, recent theoretical works show that, similar to traditional classifiers based on deep classical neural networks, quantum classifiers would suffer from the vulnerability problem: adding tiny carefully-crafted perturbations to the legitimate original data samples would facilitate incorrect predictions at a notably high confidence level. This will pose serious problems for future quantum machine learning applications in safety and security-critical scenarios. Here, we report the first experimental demonstration of quantum adversarial learning with programmable superconducting qubits. We train quantum classifiers, which are built upon variational quantum circuits consisting of ten transmon qubits featuring average lifetimes of 150 $\mu$s, and average fidelities of simultaneous single- and two-qubit gates above 99.94% and 99.4% respectively, with both real-life images (e.g., medical magnetic resonance imaging scans) and quantum data. We demonstrate that these well-trained classifiers (with testing accuracy up to 99%) can be practically deceived by small adversarial perturbations, whereas an adversarial training process would significantly enhance their robustness to such perturbations. Our results reveal experimentally a crucial vulnerability aspect of quantum learning systems under adversarial scenarios and demonstrate an effective defense strategy against adversarial attacks, which provide a valuable guide for quantum artificial intelligence applications with both near-term and future quantum devices.
16 July 2025 in IEEE Transactions on Instrumentation and Measurement
To achieve low-humidity detection of gas, an optical fiber Fabry–Pérot (FP) humidity sensor based on an ultraviolet (UV)-curable polymer-coated microbubble is proposed in this study. Experimental results show that the sensor demonstrates a sensitivity of 21 pm/% RH within 3% RH–30% RH, with a maximum nonlinearity error of 1.16% RH, excellent linearity, and high reversibility. Moreover, it maintains consistent performance in 30% RH–90% RH. The sensor exhibits low-temperature cross-sensitivity, which can be further mitigated via temperature compensation. Notably, it features a wide dynamic range, high stability, low cost, high spectral contrast, and rapid response/recovery times of approximately 60/36 s, while remaining unaffected by high-pressure environments. These attributes make it promising for humidity monitoring in gas-insulated switchgear (GIS) electrical equipment.
1 January 2026 in IEEE Transactions on Instrumentation and Measurement