Bo Tao

Bo Tao

Auto-generated profile, based on publicly available information

Bo Tao

School of Automation Engineering, Northeast Electric Power University, Jilin, China

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
HYHanrui Yang
Hanrui Yang
SXShuang Xie
Shuang Xie
SJShengxi Jiao
Shengxi Jiao
SXShibo Xu
Shibo Xu
BTBo Tao
Bo Tao
NXNi Xing
Ni Xing
To achieve low-humidity detection of gas, an optical fiber Fabry–Pérot (FP) humidity sensor based on an ultraviolet (UV)-curable polymer-coated microbubble is proposed in this study. Experimental results show that the sensor demonstrates a sensitivity of 21 pm/% RH within 3% RH–30% RH, with a maximum nonlinearity error of 1.16% RH, excellent linearity, and high reversibility. Moreover, it maintains consistent performance in 30% RH–90% RH. The sensor exhibits low-temperature cross-sensitivity, which can be further mitigated via temperature compensation. Notably, it features a wide dynamic range, high stability, low cost, high spectral contrast, and rapid response/recovery times of approximately 60/36 s, while remaining unaffected by high-pressure environments. These attributes make it promising for humidity monitoring in gas-insulated switchgear (GIS) electrical equipment.

11 December 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
HYHanrui Yang
Hanrui Yang
BTBo Tao
Bo Tao
SJShengxi Jiao
Shengxi Jiao
SXShuang Xie
Shuang Xie
A novel long-period fiber grating (LPFG)-based sensor for simultaneous temperature and humidity monitoring was developed to overcome the cross-sensitive limitations of conventional single-dip LPFG sensor. The sensor structure was fabricated by tapering a coreless fiber into conical LPFG structures through periodic electric arc discharge, followed by cascading two NT-LPFG with distinct taper diameters. The specific detection of sensors is achieved by the unique temperature- and humidity-responsive properties of UV-photosensitive polymers. By correlating wavelength shifts of two resonance dips with temperature and humidity through experimental calibration, a sensitivity matrix was established to decouple cross-sensitive parameters. Experimental results demonstrate temperature sensitivities of -55.6 pm/°C and -52.9 pm/°C, and humidity sensitivities of -18.3pm/%RH and -20.8pm/%RH within 10–60°C and 10–90%RH ranges, respectively, with all fitting coefficients R squared greater than 0.99. Random validation tests yielded mean relative errors of 1.46% (temperature) and 2.12% (humidity). It is noteworthy that the proposed structure exhibits a wider measurement range, excellent sensitivity, and good linearity. Compared with conventional LPFG, it possesses distinct advantages including compact structure and simple fabrication. This sensor exhibits broad application prospects in industrial environments such as power and energy sectors.