This paper examines a new study on the synergistic effect of magnetic nanoparticles and wormlike micelles (WLMs) on drag reduction. Fe₃O₄ magnetic nanoparticles (FE-NPs) are utilized to improve the performance of viscoelastic surfactant (VES) solutions used as fracturing fluids. The chemical composition and micromorphology of the FE-NPs were analyzed with FT-IR and an electron microscope. The stability and interaction of the WLM-particle system were studied by zeta potential and cryo-TEM measurements. More importantly, the influences of the temperature, FE-NP concentration, magnetic field intensity, and direction on the drag reduction rate of WLMs were systematically investigated in a circuit pipe flow system with an electromagnetic unit. The experimental results show that a suitable content of magnetic nanoparticles can enhance the settlement stability and temperature resistance of WLMs. A magnetic field along the flow direction of the fracturing fluid can improve the drag reduction performance of the magnetic WLM system. However, under a magnetic field perpendicular to the direction of fluid flow, an additional flow resistance is generated by the vertical chaining behavior of FE-NPs, which is unfavorable for the drag reduction performance of magnetic VES fracturing fluids. This study may shed light on the mechanism of the synergistic drag reduction effects of magnetic nanoparticles and wormlike micelles.

Fe₃O₄@ZnO nanocomposites (NCs) were synthesized to improve the stability of the wormlike micelle (WLM) network structure of viscoelastic surfactant (VES) fracturing fluid and were characterized by Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). Then, an NC-enhanced viscoelastic surfactant solution as a fracturing fluid (NC-VES) was prepared, and its properties, including settlement stability, interactions between NCs and WLMs, proppant-transporting performance and gel-breaking properties, were systematically studied. More importantly, the influences of the NC concentration, shear rate, temperature and pH level on the stability of NC-VES were systematically investigated. The experimental results show that the NC-VES with a suitable content of NCs (0.1 wt.%) shows superior stability at 95 °C or at a high shear rate. Meanwhile, the NC-VES has an acceptable wide pH stability range of 6–9. In addition, the NC-VES possesses good sand-carrying performance and gel-breaking properties, while the NCs can be easily separated and recycled by applying a magnetic field. The temperature-resistant, stable and environmentally friendly fracturing fluid opens an opportunity for the future hydraulic fracturing of unconventional reservoirs.

A soft magnetic elastomer, called a magnetorheological elastomer (MRE), based on a polyacrylamide (PAM) modified carbonyl iron particle (P-CIP) composite and a water-soluble PAM matrix was designed and prepared by the chemical polymerization and crosslinking method. P-CIPs were synthesized by the polymerization of an acrylamide monomer on the CIP surface to improve the oxidation resistance of CIPs and the interaction between the particles and polymer matrix in the MRE. The results obtained from infrared spectroscopy, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) (in a nitrogen atmosphere) show that the coating effect of the polymer on the particle surface is very good. TGA (in an air atmosphere) curves indicate that the P-CIPs show strong oxidation resistance. Meanwhile, the test results obtained for the magnetic properties show that the MRE with P-CIPs has a saturation magnetization (94.7 emu g⁻¹), a relative magnetorheological effect (687.5%), and a Payne effect factor (92%) under the action of a strong magnetic field (1 T). It was also clearly found that these properties are enhanced with increasing magnetic field intensity. Furthermore, the chain effect of magnetic particles under a magnetic field, the strong particle–matrix interaction and its breakdown process with increasing shear strain were discussed in this work.

China hosts abundant coal-rock gas (CRG) resources, which have become a critical unconventional natural gas contributor to national reserve expansion and production increment. Supercritical carbon dioxide (ScCO₂) fracturing is recognized as a green and efficient stimulation technology, exhibiting great potential for high-efficiency CRG exploitation. To clarify the effects and intrinsic mechanisms of ScCO₂ treatment on coal fracture initiation, propagation, and CRG recovery enhancement, true triaxial fracturing and CO₂-CH₄ displacement experiments were performed in combination with multiple microscopic characterization methods, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning electron microscopy (SEM). The multi-scale experimental investigation systematically revealed the fracture development mechanism, permeability variation characteristics, and microstructural evolution of coal reservoirs under ScCO₂ interactions. The results indicate that ScCO₂ fracturing significantly lowers the coal fracture initiation threshold compared with conventional hydraulic fracturing, with the breakdown pressure reduced by 26.2% and the initiation time shortened by 37.5%. Such advantages facilitate coal fracture activation and the development of complex fracture networks. Long-term ScCO₂ soaking induces the dissolution of inorganic minerals (e.g., calcite, plagioclase, and clay minerals) and the extraction of inherent organic matter within coal matrices. The coupled hydro-chemical reactions reconstruct the coal pore structure, enlarge pore throats, and improve reservoir permeability, achieving a maximum permeability enhancement of approximately 1.6 times. Meanwhile, ScCO₂ displacement yields a prominent CRG recovery performance, with an ultimate gas recovery factor up to 93.85%. The CRG enhancement mechanism of ScCO₂ fracturing is comprehensively attributed to three core coupled effects. First, ScCO₂ dynamic fracturing generates intricate fracture networks, which greatly optimize reservoir seepage channels and flow space. Second, the ScCO₂–formation water–coal interaction modifies coal physical properties via mineral dissolution and organic matter extraction, thereby improving reservoir permeability. Third, the preferential adsorption of CO₂ over CH₄ triggers effective competitive adsorption and gas displacement, further promoting adsorbed methane desorption and elevating CRG recovery efficiency. This study provides a solid theoretical foundation for the field application of ScCO₂ fracturing technology and offers valuable insights into the green, efficient, and sustainable development of deep coal-rock gas resources.