Kongpol Areerak

Dr. Kongpol Areerak

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 December 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
TSTheppanom Sopapirm
Theppanom Sopapirm
SBSerhiy Bozhko
Serhiy Bozhko
CHChristopher Hill
Christopher Hill
ASApichai Suyapan
Apichai Suyapan
KAKongpol Areerak
Kongpol Areerak
It is known that, when tightly regulated, actively controlled power converters behave as constant power loads. These loads can significantly degrade the stability of their feeder system. The loop-cancellation technique has been established as an appropriate methodology to mitigate this issue within DC-DC converters which feed constant power loads. However, this has not yet been applied to uncontrolled rectifier based AC-DC converters. This paper therefore details a new methodology which allows the loop-cancellation technique to be applied to uncontrolled rectifier based AC-DC converters in order to mitigate instability when supplying constant power loads. This technique could be used in both new applications and easily retrofitted into existing applications. Furthermore, the key contribution of this paper is a novel adaptive stabilization technique which eliminates the destabilizing effect of constant power loads for the studied AC-DC power system. An equation, derived from the average system model, is introduced and utilized to calculate the adaptable gain required by the loop-cancelation technique. As a result, the uncontrolled rectifier based AC-DC feeder system is always stable for any level of constant power load. The effectiveness of the proposed adaptive mitigation has been verified by small-signal and large signal stability analysis, simulation, and experimental results

17 May 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
ASApichai Suyapan
Apichai Suyapan
SBSerhiy Bozhko
Serhiy Bozhko
SYSeang Shen Yeoh
Seang Shen Yeoh
KAKongpol Areerak
Kongpol Areerak
Most loads of electrical power systems on a more electric aircraft (MEA) are regulated power converters. These loads behave as constant power loads (CPLs) that can significantly affect system stability. The system will become unstable and will be unable to operate at the rated power. In this article, a novel adaptive stabilization of a permanent magnet synchronous generator-based dc electrical power system in MEA is presented using a nonlinear feedback approach via loop-cancellation technique with a simple equation of feedback gain, which can be calculated from the power level of the CPL. The equation can be derived from a polynomial curve fitting based on the proposed mathematical model derived using the dq method. The adaptive stabilization results are validated by a small-signal stability analysis using the linearization technique, a large-signal stability analysis using the phase plane analysis, an intensive time-domain simulation using MATLAB, and experimentation. The results indicate that the proposed adaptive stabilization technique can provide the considered aircraft power system always stable for all operating conditions within the rated power, and the dc bus voltage can adhere to the MIL-STD-704F standard.

19 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
SJSarawut Janpong
Sarawut Janpong
KAKongpol Areerak
Kongpol Areerak
KAKongpan Areerak
Kongpan Areerak
This paper presents an efficient harmonic detection for real-time generation of the reference current fed to a shunt active power filter using the ADALINE neural network. This proposed method is a single layer with 101 nodes generating the coefficients referred to as weights of the reference current model. It effectively overcomes the drawback of the current technology, which is instantaneous power theory (PQ). The proposed method was implemented on the TMS320F28335 DSP board and tested against MATLAB with Simulink as a hardware-in-loop (HIL) structure. This method gives a good performance by producing a precise reference current in a short period with uncomplicated calculation. It also efficiently can eliminate individual harmonic current. The achieved percentage of total harmonic distortion (%THD) in the current is reduced following the IEEE standard, while the power factor can be maintained to unity.

31 July 2023 in IEEE Access
Verified
Journal Article
Open access
Jakkrit PakdeetoJakkrit Pakdeeto
Jakkrit Pakdeeto
SWSaruta Wansungnoen
Saruta Wansungnoen
KAKongpol Areerak
Kongpol Areerak
KAK-L. Areerak
K-L. Areerak
KAK-N. Areerak
K-N. Areerak
Brushless direct current motors are widely used in many industries because of their high efficiency and long-life. This paper presents the application of the adaptive Tabu Search algorithm for system identification and PID speed controller design to provide the best speed output performance compared with those designed using the well-known tuning method, the Ziegler–Nichols approach. The proposed design technique shows that the adaptive Tabu Search algorithm includes the control signal consideration in the design process. As a result, the resulting controller parameters can be implemented without the limitations of the real devices, while the Ziegler–Nichols method cannot provide as good a response as expected. The results are validated by simulation and experiment in which the output responses from the proposed design method are evidently better than those from the conventional method. Moreover, other artificial intelligence techniques such as the genetic algorithm, particle swarm optimization etc. can also be applied for the optimal design process following the concept in this paper in which the characteristics of the control signal are considered for real devices.

17 December 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
RPRatapon Phosung
Ratapon Phosung
TSTheppanom Sopapirm
Theppanom Sopapirm
KAKongpol Areerak
Kongpol Areerak
Most electrical power system loads are actively controlled power electronics converters behaving as constant power loads. These loads resemble a small-signal negative impedance that can directly degrade the system stability margin and performance. The active damping approach is widely used for instability mitigation. However, if the mitigation is applied at the load side, it can affect the load performance. Therefore, this article presents a new design method for instability mitigation by the artificial intelligence method called the adaptive tabu search algorithm. After applying the proposed design method, the power system can maintain stable operation until achieving the rated power. Moreover, the load performance is better when the proposed design technique is applied compared to that from the conventional design. Good agreement among theoretical, simulation, and experimental results is also achieved.

21 January 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
Jakkrit PakdeetoJakkrit Pakdeeto
Jakkrit Pakdeeto
SBSerhiy Bozhko
Serhiy Bozhko
KAKongpol Areerak
Kongpol Areerak
DC microgrid systems (DCMGs) feed power to constant power loads (CPLs) via transmission lines. Although these systems are commonly used worldwide, CPLs have negative impedance effects. These loads can significantly degrade the system stability. Therefore, stability study is very important to avoid inefficient operations. The model proposed in this article can be derived using a combination of the direct quadrature (DQ) method and the generalized state-space averaging (GSSA) method. This model is suitable for analyzing the system stability using the eigenvalue theorem. For stability analysis, the proposed (DCMGs) will be unstable before reaching the rated power when the irradiance is equal to 0 W/m 2 . Consequently, the loop-cancellation technique is applied to mitigate the unstable operation until the operation at the rated power can be achieved. Experimental and simulation results were used to confirm the theoretical analysis. The system performed well, and the results proved that the system could be stabilized using the proposed technique.