With the development and prosperity of the global economy, the emission of carbon dioxide (CO2) has become an increasing concern. Its greenhouse effect will cause serious environmental problems, such as the global warming and climate change. Therefore, the worldwide scientists have devoted great efforts to control CO2 emissions through various strategies, such as capture, resource utilization, sequestration, etc. Among these, the catalytic conversion of CO2 to methane is considered as one of the most efficient routes for resource utilization of CO2 owing to the mild reaction conditions and simple reaction device. Pioneer thermodynamic studies have revealed that low reaction temperature is beneficial to the high catalytic activity and CH4 selectivity. However, the low temperature will be adverse to the enhancement of the reaction rate due to kinetic barrier for the activation of CO2. Therefore, the invention of highly efficient catalysts with promising low temperature activities toward CO2 methanation reaction is the key solution. The Ni based catalysts have been widely investigated as the catalysts toward CO2 methanation due to their low cost and excellent catalytic performances. However, the Ni based catalysts usually perform poor low-temperature activities and stabilities. Therefore, the development of highly efficient Ni based catalysts with excellent low-temperature catalytic performances has become the research focus as well as challenge in this field. Therefore, we summarized the recent research progresses of constructing highly efficient Ni based catalysts toward CO2 methanation in this review. Specifically, the strategies on how to enhance the catalytic performances of the Ni based catalysts have been carefully reviewed, which include various influencing factors, such as catalytic supports, catalytic auxiliaries and dopants, the fabrication methods, reaction conditions, etc. Finally, the future development trend of the Ni based catalysts is also prospected, which will be helpful to the design and fabrication of the Ni catalysts with high efficiency toward CO2 methanation process.
28 February 2019 in Journal of Materials Chemistry A
The lithium/fluorinated carbon (Li/CFx) battery is a widely used solid-state lithium primary battery (LPB) with the highest ever known specific energy. However, the scarcity of lithium resources compels researchers to explore other types of batteries. Sodium batteries have been considered as the most suitable candidate power sources due to the low cost of sodium and its similar chemistry to lithium. In this work, we prepared two series of fluorinated carbon nanotubes (CNTs), which are fluorinated common CNTs (FCNT-x) and fluorinated graphitized CNTs (FGCNT-x). The effects of graphitization of the CNTs on the structure of fluorinated carbon nanotubes and C–F bonding are systematically studied. FGCNT-x prepared from the graphitized CNTs exhibit a lower ratio of F/C and weaker C–F bonding than those of the FCNT-x prepared from ordinary CNTs at the same fluorination temperature. FGCNT-0.81 exhibits very high specific capacities of 798.8 and 751 mA h g−1 in lithium and sodium primary batteries, nearly reaching the theoretical capacity calculated using the F/C ratio. Besides, FGCNT-0.81 possesses a maximum energy density of 2006.6 W h kg−1 in Li/CFx batteries and 1733.4 W h kg−1 in Na/CFx batteries. The maximum power density for Li/CFx and Na/CFx batteries could reach up to 3861.1 (FCNT-0.81) and 1863.9 W h kg−1 (FGCNT-0.81), respectively. It is proved that the binding energy of the C–F bond, the electronegativity and the polarization force of the metal ions collaboratively determine the electrochemical performance of the fluorinated CNTs. The new-type Na/CFx primary batteries developed here are promising in low power applications such as high-energy density and low-cost batteries.