The purpose of this study is to investigate the ability of the Sentinel-5P TROPOspheric Monitoring Instrument (TROPOMI) to derive accurate geometrical features of lofted aerosol layers, selecting the Mediterranean Basin as the study area. Comparisons with ground-based correlative measurements constitute a key component in the validation of passive and active satellite aerosol products. For this purpose, we use ground-based observations from quality-controlled lidar stations reporting to the European Aerosol Research Lidar Network (EARLINET). An optimal methodology for validation purposes has been developed and applied using the EARLINET optical profiles and TROPOMI aerosol products, aiming at the in-depth evaluation of the TROPOMI aerosol layer height (ALH) product for the period 2018 to 2022 over the Mediterranean Basin. Seven EARLINET stations were chosen, taking into consideration their proximity to the sea, which provided 63 coincident aerosol cases for the satellite retrievals. In the following, we present the first validation results for the TROPOMI/S5P ALH using the optimized EARLINET lidar products employing the automated validation chain designed for this purpose. The quantitative validation at pixels over the selected EARLINET stations illustrates that the TROPOMI ALH product is consistent with the EARLINET lidar products, with a high correlation coefficient R=0.82 (R=0.51) and a mean bias of $-\mathrm{0.51}\pm \mathrm{0.77}$ km and $-\mathrm{2.27}\pm \mathrm{1.17}$ km over ocean and land, respectively. Overall, it appears that aerosol layer altitudes retrieved from TROPOMI are systematically lower than altitudes from the lidar retrievals. High-albedo scenes, as well as low-aerosol-load scenes, are the most challenging for the TROPOMI retrieval algorithm, and these results testify to the need to further investigate the underlying cause. This work provides a clear indication that the TROPOMI ALH product can under certain conditions achieve the required threshold accuracy and precision requirements of 1 km, especially when only ocean pixels are included in the comparison analysis. Furthermore, we describe and analyse three case studies in detail, one dust and two smoke episodes, in order to illustrate the strengths and limitations of the TROPOMI ALH product and demonstrate the presented validation methodology. The present analysis provides important additions to the existing validation studies that have been performed so far for the TROPOMI S5P ALH product, which were based only on satellite-to-satellite comparisons.

The aim of this study is to investigate the potential of the Global Ozone Monitoring Experiment-2 (GOME-2) instruments, aboard the Meteorological Operational (MetOp)-A, MetOp-B and MetOp-C satellite programme platforms, to deliver accurate geometrical features of lofted aerosol layers. For this purpose, we use archived ground-based lidar data from stations available from the European Aerosol Research Lidar Network (EARLINET) database. The data are post-processed using the wavelet covariance transform (WCT) method in order to extract geometrical features such as the planetary boundary layer (PBL) height and the cloud boundaries. To obtain a significant number of collocated and coincident GOME-2 – EARLINET cases for the period between January 2007 and September 2019, 13 lidar stations, distributed over different European latitudes, contributed to this validation. For the 172 carefully screened collocations, the mean bias was found to be −0.18 ± 1.68 km, with a near-Gaussian distribution. On a station basis, and with a couple of exceptions where very few collocations were found, their mean biases fall in the ± 1 km range with an associated standard deviation between 0.5 and 1.5 km. Considering the differences, mainly due to the temporal collocation and the difference, between the satellite pixel size and the point view of the ground-based observations, these results can be quite promising and demonstrate that stable and extended aerosol layers as captured by the satellite sensors are verified by the ground-based data. We further present an in-depth analysis of a strong and long-lasting Saharan dust intrusion over the Iberian Peninsula. We show that, for this well-developed and spatially well-spread aerosol layer, most GOME-2 retrievals fall within 1 km of the exact temporally collocated lidar observation for the entire range of 0 to 150 km radii. This finding further testifies for the capabilities of the MetOp-borne instruments to sense the atmospheric aerosol layer heights.

A persistent stratospheric aerosol layer first appeared during July 2019 above Thessaloniki, Greece (40.5°N, 22.9°E). It was initially at 12 km and, during August 2019, was even up to 20 km, with increased thickness and reduced attenuated backscatter levels till the end of the year. In this study, we analyze the geometrical and optical properties of this stratospheric layer, using ground-based Lidar measurements, CALIOP/CALIPSO & OMPS-LP space-borne observations, as well as CAMS/ECMWF assimilation experiments. The main aim of the paper is to present an overview of this atmospheric feature and to identify any temporal changes in the aerosol properties that would signify substantial changes in the composition of this long-lasting stratospheric plume over Thessaloniki. This aim is further enhanced by emphasizing the importance of the combined information based on active ground- and space-borne lidars, passive remote sensing, and models during the complex stratospheric aerosol conditions as those encountered during 2019. The layer’s origin is linked to the Raikoke volcanic eruption in the Kuril Islands in June 2019, yielding a particle linear depolarization ratio less than 0.05, while some indications exist that the intense forest fires at mid and high northern latitudes throughout the summer of 2019 also contributed to the persistent layer. We report that in July, mainly volcanic sulphate aerosol layers with a 1–3 km vertical extent were identified in the stratosphere at ~15 km over Thessaloniki, while after August and until the end of 2019, the plume heights showed a significant month-to-month variability and a broadening (with thickness greater than 3 km) towards lower altitudes. The aerosol optical thickness was found to be in the range between 0.004 and 0.125 (visible) and 0.001 and 0.095 (infrared) and the particle depolarization of the detected stratospheric plume was found to be 0.03 ± 0.04, indicative of spherical particles, such as sulphate aerosols.

Between 14 March and 21 April 2022, an extensive investigation of an extraordinary Saharan dust intrusion over Europe was performed based on lidar measurements obtained by the European Aerosol Research Lidar Network (EARLINET). The dust episode was divided into two distinct periods, one in March and one in April, characterized by different dust transport paths. The dust aerosol layers were studied over 18 EARLINET stations, examining aerosol characteristics during March and April in four different regions (M-I, M-II, M-III, and M-IV and A-I, A-II, A-III, and A-IV, respectively), focusing on parameters such as aerosol layer thickness, center of mass (CoM), lidar ratio (LR), particle linear depolarization ratio (PLDR), and Ångström exponents (ÅE). In March, regions exhibited varying dust geometrical and optical properties, with mean CoM values ranging from approximately 3.5 to 4.8 km, and mean LR values typically between 36 and 54 sr. PLDR values indicated the presence of both pure and mixed dust aerosols, with values ranging from 0.20 to 0.32 at 355 nm and 0.24 to 0.31 at 532 nm. ÅE values suggested a range of particle sizes, with some regions showing a predominance of coarse particles. Aerosol Optical Depth (AOD) simulations from the NAAPS model indicated significant dust activity across Europe, with AOD values reaching up to 1.60. In April, dust aerosol layers were observed between 3.2 to 5.2 km. Mean LR values typically ranged from 35 to 51 sr at both 355 nm and 532 nm, while PLDR values confirmed the presence of dust aerosols, with mean values between 0.22 and 0.31 at 355 nm and 0.25 to 0.31 at 532 nm. The ÅE values suggested a mixture of particle sizes. The AOD values in April were generally lower, not exceeding 0.8, indicating a less intense dust presence compared to March. The findings highlight spatial and temporal variations in aerosol characteristics across the regions, during the distinctive periods. From 15 to 16 March 2022, Saharan dust significantly reduced UV-B radiation by approximately 14% over the ATZ station (Athens, GR). Backward air mass trajectories showed that the dust originated from the Western and Central Sahara when, during this specific case, the air mass trajectories passed over GRA (Granada, ES) and PAY (Payerne, CH) before reaching ATZ, maintaining high relative humidity and almost stable aerosol properties throughout its transport. Lidar data revealed elevated aerosol backscatter (b_aer) and PLDR values, combined with low LR and ÅE values, indicative of pure dust aerosols.

A long-term analysis and climatology of aerosol backscatter and extinction coefficients profiles using a five-year study period lidar dataset derived from a multiwavelenth Raman lidar at Thessaloniki station is presented. All measurements have been processed with the latest version of the Single Calculus Chain (SCCv5.1.6) fully automated algorithm, which has been developed to provide a common lidar processing tool, within EARLINET (European Aerosol Research Lidar NETwork) stations. The optical products delivered by the SCC tool have already been compared with the optical products derived from the operational algorithm of Thessaloniki (THessaloniki Aerosol LIdar Algorithm-THALIA) and discussed in terms of inhomogeneities. In this contribution, we analyze these products for climatological purposes, in order to investigate the aerosol columnar properties over Thessaloniki lidar station, drawing conclusions about the issues to be considered when switching from the current operational algorithm to the SCCv5. The SCCv5 algorithm is evaluated for the AOD both for 355 and 532 nm. The agreement with THALIA algorithm seems promising with correlations of 0.89 and 0.84, respectively, and absolute deviations within the range of the EARLINET quality requirements. Time series of the AOD at 355 nm denote a decrease of 0.017 per year in the free troposphere, a trend that is also shown in the AOD values derived from the operational algorithm (0.014). A decrease of 0.01 per year in the lower troposphere is also noted from the SCC, whereas the corresponding AOD values derived from the operational algorithm denote a decrease of 0.017.

Two measurement campaigns were conducted at Thessaloniki, an urban station, (40.5°N, 22.9°E; 60 m) in the frame of the PANhellenic infrastructure for Atmospheric Composition and climatEchAnge (PANACEA) project. The first one covers the period from July to August 2019 and the second one from January to February An overview of the aerosol optical properties (columnar and height resolved), acquired with the remote sensing infrastructure of the Laboratory of Atmospheric Physics (LAP) of the Aristotle University of Thessaloniki (AUTH), as well as the additional instrumentation that participated during the PANACEA campaigns is presented. The majority of the detected layers (16 out of 40, ranged between 0.8 and 4.5 km) are classified as biomass burning aerosols, attributed to either city sources or long range transport. Concerning the other aerosol types, the Clean Continental cluster has an occurrence ratio of 23%, while dust layers and mixtures with urban particles transported to Thessaloniki are also identified. Our findings are discussed along with the surface information, i.e., the particulate matter (PM2.5 and PM10) concentrations and the black carbon (BC) concentration, separated into fossil fuel (BC_ff) and biomass/wood burning (BC_wb) fractions. This is the first time that collocated in situ and remote sensing instruments are deployed in Thessaloniki in order to assess the presence of aerosols and the predominant aerosol type both in situ and at elevated heights. Overall, our study showed that the BC_wb contribution to the BC values in Thessaloniki is quite low (11%), whilst the majority of the biomass burning layers identified with the lidar system, are also linked with enhanced BC contribution and high Fine Mode Fraction values.