This study investigates different cases to obtain optimal Window-to-Wall ratio (WWR) in seven different climate conditions based on the Köppen–Geiger climate classification. The optimal WWR was decided based on the minimum amount of total energy use (total of cooling, heating, and lighting energy use) of a building model during a complete year. The impact of overhang and automatic blinds were assessed on the optimization of WWR for a building with integrated automatic lighting control. Moreover, three different windows with different U-values and features were employed in order to analyze their effect on the energy use and WWR of the building. IDA-Indoor Climate and Energy (IDA-ICE) was used to carry out the simulations. The software has been validated based on ASHRAE Standard 140. Based on each climate condition, orientation, employed window type, and comfort conditions, an optimal range with a specific combination of window with blind, overhang, or neither was found.
In this study, the performance of different cooling technologies from energy and economic perspectives were evaluated for six different prototype residential Nearly Zero Energy Buildings (NZEBs) within a planned future city district in central Sweden. This was carried out by assessing the primary energy number and life cycle cost analysis (LCCA) for each building model and cooling technology. Projected future climate file representing the 2050s (mid-term future) was employed. Three cooling technologies (district cooling, compression chillers coupled/uncoupled with photovoltaic (PV) systems, and absorption chillers) were evaluated. Based on the results obtained from primary energy number and LCCA, compression chillers with PV systems appeared to be favorable as this technology depicted the least value for primary energy use and LCCA. Compared to compression chillers alone, the primary energy number and the life cycle cost were reduced by 13%, on average. Moreover, the district cooling system was found to be an agreeable choice for buildings with large floor areas from an economic perspective. Apart from these, absorption chillers, utilizing environmentally sustainable district heating, displayed the highest primary energy use and life cycle cost which made them the least favorable choice. However, the reoccurring operational cost from the LCCA was about 60 and 50% of the total life cycle cost for district cooling and absorption chillers, respectively, while this value corresponds to 80% for the compression chillers, showing the high net present value for this technology but sensitive to future electricity prices.
14 October 2024 in Science and Technology for the Built Environment
This chapter investigates the implementation of district cooling systems by exploring several research studies reported in the literature. The topics addressed include typologies and design parameters, benefits and limitations, applications of the system, and the technology readiness level. District cooling systems are generally regarded as cost-efficient and environmentally friendly solutions. One might think that district cooling is only a solution for areas with a very warm climate. However, based on the reported results of the surveyed studies, the number of operating district cooling systems has increased over the years, with the Scandinavian countries taking the lead in this market within European countries. Implementation of these systems concluded reduction in primary energy and electricity use, they also proved to be an environmentally efficient way.
The European Commissions has emphasized the importance of Nearly Zero Energy Buildings (NZEB); therefore, EU members are obliged to comply with these regulations. In this study, it is strived to model different residential NZEBs within a planned prototype district in mid-Sweden and evaluate the performance of different cooling technologies from energy and life cycle cost perspectives. This was carried out through addressing two research questions dealing with: 1- prediction of space cooling demand and primary energy use, 2- finding the optimum economical cooling technology. Three cooling technologies, district cooling, compression chillers coupled with and without photovoltaic (PV) systems as well as absorption chillers were evaluated. Simulations were carried out using a projected future climate file representing 2050s (mid-term future) for 6 different residential buildings. As conclusion the primary energy number is inversely related to the shape factor of the building; for instance, with increase in shape factor, the primary energy number decreased. In addition, it was found that the combination of compression chiller with PV systems appeared to be optimal based on the primary energy number and life cycle cost analysis. Moreover, district cooling system was an agreeable choice for buildings with large floor areas.