A silicon photomultiplier (SiPM) LiDAR with photon threshold detection can achieve high dynamic performance. However, the number fluctuations of echo signal photons lead to the range walk error (RWE) in SiPM LIDARs. This paper derives the RWE model of SiPM LiDAR by using the LiDAR equation and statistical property of SiPM’s response. Based on the LiDAR system parameters and the echo signal intensity, which is obtained through the SiPM’s photon-number-resolving capability, the RWE is calculated through the proposed model. After that, we carry out experiments to verify its effectiveness. The result shows that the method reduces the RWE in TOF measurements using photon threshold detection from 36.57 cm to the mean deviation of 1.95 cm, with the number of detected photons fluctuating from 1.3 to 46.5.
Infrared sensors are being applied more and more widely in industrial production applications. Based on the theory of thermal radiation, this paper discusses the system design principle, temperature calibration method, and thermal image analysis method in detail. The system passed the measurement unit certification, showing that the field of view is 180°, the number of scanning points is 2048, the linear velocity is 10–100 Hz, the spatial resolution is 2.5 mrad, and the precision is ±1 °C. An online monitoring test of torpedo car was carried out in the steelmaking plant of Bao Steel. The results show that the system has strong anti-interference ability, stability, and reliability, and meets the application requirements of online monitoring.
To realize precise control of the quantum dots (Qdots) device, multi-channel precision bias source plays the key role. In this paper, the 16-channel high precision bias source with 18-bit resolution for Qdots device was designed. The prototype was made and its performance was tested. The short time fluctuations can reach 50μV. The step response time is less than 3μs. The resolution, stability, linearity and dynamic range of the bias source exhibits good performance. What's more, the bias source can be controlled locally and online. The results show that it is one effective and feasible topology for experiments in Qdots device application.