Pulsed electric fields (PEF) as a new pasteurization technology played an important role in the process of inactivating microorganisms. At the same time, temperature could promote the process of electroporation, and achieve better inactivation effect. This article studied the inactivation effect of PEF on Saccharomyces cerevisiae, Escherichia coli, and Bacillus velezensis under different initial temperatures (room temperature-24 $$\mathrm{^\circ{\rm C} }$$ , 30 $$\mathrm{^\circ{\rm C} }$$ , 40 $$\mathrm{^\circ{\rm C} }$$ , 50 $$\mathrm{^\circ{\rm C} }$$ ). From the inactivation results, it found temperature could reduce the critical electric field intensity for microbial inactivation. After the irreversible electroporation of microorganisms occurred, the nucleic acid content and protein content in the suspension increased with the inactivation rate because the cell membrane integrity was destroyed. We had proved that the electric field and temperature could promote molecular transport through the finite element simulation. Under the same initial temperature and electrical parameters (electric field intensity, pulse width, pulse number), the lethal effect on different microorganisms was Saccharomyces cerevisiae > Escherichia coli > Bacillus velezensis.
4 February 2020 in IEEE Transactions on Plasma Science
Tetracycline is one of the widely used antibiotic drugs, but it also causes severe water pollution. This research applied a pulsed dielectric barrier discharge (DBD) plasma reactor of coaxial configuration with a screw-type high-voltage electrode to treat tetracycline in an aqueous solution, which was recycled to flow over the surface of the inner electrode. The effects of discharge voltage, initial concentration, and pH value of tetracycline on the degradation efficiency, total organic carbon (TOC) removal rate, kinetic rate constant (k), and energy efficiency were investigated. The results show that 92.3% degradation efficiency and 65.01% TOC removal rate of tetracycline were achieved at the initial concentration of 50 mg/L, corresponding to the energy efficiency of 20.24 g/(kW·h). The tetracycline degradation efficiencies were dependent on the initial concentration from 5 to 75 mg/L, which led to the decrease of the degradation kinetic rate constant from 0.518 to 0.077 min⁻ⁱ. The TOC removal rate of tetracycline was strongly enhanced at higher pH values from 1.5 to 10.5, with the optimum value at 7.5. The intermediate products of tetracycline produced by the plasma treatment were analyzed by liquid chromatography mass spectrometry (LC-MS), which show that the aromatic ring, amino group, and the double bonds were mainly attacked by the hydroxyl radical and other reactive oxygen species. A possible degradation pathway has also been proposed.
Background: After the discovery of membrane-reversible electroporation decades ago, the procedure has been used extensively in biology, biotechnology and medicine. The research on the basic mechanism has increasingly attracted attention. Although most research has focused on models that consider all atomic and molecular interactions and much atomic-level information can be obtained, the huge computational demand limits the models to simulations of only a few nanometers on the spatial scale and a few nanoseconds on the time scale. In order to more comprehensively study the reversible electroporation mechanism of phospholipid membrane on the nanoscale and at longer time intervals of up to 100 ns, we developed a dipalmitoylphosphatidylcholine (DPPC) phospholipid membrane model with the coarse-grained Martini force field. The model was tested by separately examining the morphology of the phospholipid membrane, the hydrophilic channel size, the distribution of the voltage potential on both sides of the membrane, and the movement of water molecules and ions during electroporation. Results: The results showed that the process went through several stages: (1) the formation of the pore with defects originating on the surface. (2) The maintenance of the pore. The defects expanded to large pores and the size remains unchanged for several nanoseconds. (3) Pore healing stage due to self-assembly. Phospholipid membrane shrunk and the pore size decreased until completely closed. The pores were not circular in cross-section for most of the time and the potential difference across the membrane decreased dramatically after the pores formed, with almost no restoration of membrane integrity even when the pores started to close. Conclusions: The mechanism of the reversible electroporation process on the nanoscale level, including defects, expansion, stability, and pore closing stages on a longer time scale of up to 100 ns was demonstrated more comprehensively with the coarse-grained Martini force field, which took both the necessary molecular information and the calculation efficiency into account.
25 July 2023 in IEEE Transactions on Industrial Electronics
The parasitic capacitance of magnetic components, i.e., inductors and transformers, are crucial, because it dominates the high-frequency impedance, causes voltage / current spikes, and arouses electromagnetic interference issues. The existing methods characterize capacitance from all five parts (turn-to-turn, layer-to-layer, winding-to-magnetic core, winding-to-electrostatic screen, and interwinding). However, the calculated results are always less than the measured capacitance, especially for the inductors with few winding turns. This article discovers another mechanism of the parasitic capacitance caused by d B /d t . It points out that a time-varying magnetic field also generates an electric field, which leads to parasitic capacitance, and proves that this capacitance dominates the first resonant frequency (denoted by fR ) of the inductors with few winding turns. The factors related to the capacitance and the fR are analyzed. The proposed theoretical analysis is validated by numerous simulations and experimental results. All the simulations are included in the multimedia folder.
A silicon photomultiplier (SiPM) LiDAR with photon threshold detection can achieve high dynamic performance. However, the number fluctuations of echo signal photons lead to the range walk error (RWE) in SiPM LIDARs. This paper derives the RWE model of SiPM LiDAR by using the LiDAR equation and statistical property of SiPM’s response. Based on the LiDAR system parameters and the echo signal intensity, which is obtained through the SiPM’s photon-number-resolving capability, the RWE is calculated through the proposed model. After that, we carry out experiments to verify its effectiveness. The result shows that the method reduces the RWE in TOF measurements using photon threshold detection from 36.57 cm to the mean deviation of 1.95 cm, with the number of detected photons fluctuating from 1.3 to 46.5.
16 May 2019 in IEEE Transactions on Plasma Science
Marx generator using all-solid-state devices has been studied for many years. Higher parameters are always the demand for new applications. Traditional all-solid-state Marx generator can output high voltage due to its series topology, but the current is always limited by the switch. In this paper, a stage-stage paralleled topology of Marx generator for high current has been proposed. Topology structure and driving mode comparison for current balance have been analyzed. The paralleled driving mode for the current balance and the shaping waveform has been proposed. For experiment, a four-stage-four-paralleled Marx generator with metal-oxide-semiconductor field-effect transistors (MOSFETs) has been constructed with output pulses 2.2 kV, 730 A (depending on the load), rise time of 31 ns, fall time of 56 ns, and adjustable pulsewidth from 400 to 800 ns.