The article describes a modified method of polyaniline synthesis. The classical oxidizer—aqueous solution of hydrogen peroxide was replaced by different solid state hydrogen peroxide complexes, what helped keep constant temperature of the reaction mixture. The highest yield of the polymerization was obtained using urea–hydrogen peroxide.
Crack-free binary SiOx:TiOy composite films with the refractive index of ~1.94 at wavelength 632.8 nm were fabricated on soda-lime glass substrates, using the sol–gel method and dip-coating technique. With the use of transmission spectrophotometry and Tauc method, the energy of the optical band gap of 3.6 eV and 4.0 eV were determined for indirect and direct optical allowed transitions, respectively. Using the reflectance spectrophotometry method, optical homogeneity of SiOx:TiOy composite films was confirmed. The complex refractive index determined by spectroscopic ellipsometry confirmed good transmission properties of the developed SiOx:TiOy films in the Vis-NIR spectral range. The surface morphology of the SiOx:TiOy films by atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods demonstrated their high smoothness, with the root mean square roughness at the level of ~0.15 nm. Fourier-transform infrared (FTIR) spectroscopy and Raman spectroscopy were used to investigate the chemical properties of the SiOx:TiOy material. The developed binary composite films SiOx:TiOy demonstrate good waveguide properties, for which optical losses of 1.1 dB/cm and 2.7 dB/cm were determined, for fundamental TM0 and TE0 modes, respectively.
20 August 2016 in Journal of Materials Science: Materials in Electronics
Recently DNA with hexadecyltrimethyl ammonium chloride (CTMA) complex has been included in some organic electronic devices. Thermal stability is one of key parameters required for successful applications in different electronic and optoelectronic devices. This work shows a possibility of enhancing thermal stability in this complexes and analyzes origin of this enhancement. Different techniques were applied to explore this issue of solid DNA-CTMA. Results of TGA analysis, DSC calorimetry, FTIR spectroscopy, and analysis of evolved gaseous products convince that chemical composition of DNA-CTMA complex remains fixed at temperatures <200–220 °C. In contrast, broadband dielectric spectroscopy applied to freshly prepared thin films of DNA-CTMA revealed at 150–160 °C a permanent and irreversible change of dielectric properties. This phenomenon may be attributed to a transformation affecting the microstructure. Some experiments were conducted also for the native DNA as a reference. We demonstrate that DNA-CTMA complex chemical composition is more stable at temperatures about 200 °C with respect to DNA which is very important for laser operated optoelectronic applications.
Composite silica-titania waveguide films of refractive index ca. 1.8 are fabricated on glass substrates using a sol-gel method and dip-coating technique. Tetraethyl orthosilicate and tetraethyl orthotitanate with molar ratio 1:1 are precursors. Fabricated waveguides are annealed at 500 °C for 60 min. Their optical properties are studied using ellipsometry and UV-Vis spectrophotometry. Optical losses are determined using the streak method. The material structure and chemical composition, of the silica-titania films are analyzed using transmission electron microscopy (TEM) and electron dispersive spectroscopy (EDS), respectively. The surface morphology was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods. The results presented in this work show that the waveguide films are amorphous, and their parameters are stable for over a 13 years. The optical losses depend on their thickness and light polarization. Their lowest values are less than 0.06 dB cm−1. The paper presents the results of theoretical analysis of scattering losses on nanocrystals and pores in the bulk and interfaces of the waveguide film. These results combined with experimental data clearly indicate that light scattering at the interface to a glass substrate is the main source of optical losses. Presented waveguide films are suitable for application in evanescent wave sensors.
30 March 2006 in The Journal of Physical Chemistry B