It is well-known that the mining industry in Chile and the world is searching for eco-friendly, highly efficient mineral treatments. This is because the content of toxic elements such as arsenic, antimony, and bismuth have increased in the copper concentrates in the last years. This trend has affected the market of this metal, as well as increased the potential of producing solid wastes that represent a threat to the environment. In this paper, a review on the fundamentals of the current treatments aimed at removing arsenic, antimony, and bismuth from copper concentrates under roasting conditions is presented. The literature survey included the research conducted from 2000 until now and is focused on the different types of roasting of copper concentrates reported in the literature. A summary of the experimental conditions and major findings of each work is discussed. Depending on the type of roasting, the behavior of arsenic, antimony, and bismuth species during the experiments is analyzed.
Copper oxide minerals composed of carbonates consume high quantities of leaching reagent. The present research proposes an alternative procedure for malachite leaching (Cu2CO3(OH)2) through the use of only compound, ammonium hydroxide (NH4OH). Preliminary studies were also carried out for the dissolution of malachite in an acid system. The variables evaluated were solution pH, stirring rate, temperature, NH4OH concentration, particle size, solid/liquid ratio and different ammonium reagents. The experiments were carried out in a stirred batch system with controlled temperatures and stirring rates. For the acid dissolution system, sulfuric acid consumption reached excessive values (986 kg H2SO4/ton of malachite), invalidating the dissolution in these common systems. On the other hand, for the ammoniacal system, there was no acid consumption and the results show that copper recovery was very high, reaching values of 84.1% for a concentration of 0.2 mol/dm3 of NH4OH and an experiment time of 7200 s. The theoretical/thermodynamic calculations indicate that the solution pH was a significant factor in maintaining the copper soluble as Cu(NH3)42+. This was validated by the experimental results and solid analysis by X-ray diffraction (XRD), from which the reaction mechanisms were obtained. A heterogeneous kinetic model was obtained from the diffusion model in a porous layer for particles that begin the reaction as nonporous but which become porous during the reaction as the original solid splits and cracks to form a highly porous structure. The reaction order for the NH4OH concentration was 3.2 and was inversely proportional to the square of the initial radius of the particle. The activation energy was calculated at 36.1 kJ/mol in the temperature range of 278 to 313 K.
In pyrometallurgical processes refining copper, the main source of loss in the conversion stage is from slag. This paper reports on research work treating converter slag containing high percentages of copper (36 wt%) using ammonium hydroxide at room temperature. Variables analyzed are solution pH, agitation, temperature, NH4OH concentration and particle size. Results showed that the hydronium ion resulting from ammonium hydroxide dissociation was the main oxidant of copper compounds in slag, such as CuO, Cu2O and Cu, with the exception of CuFeO2. The particles contain a large amount of microcracks (porosity) in their refractory structure (analyzed by compositional image capture (BSE)). Thus, the diffusion of the leaching solution through the microcracks making contact with the copper oxides would be allowed. Leaching mechanisms were corroborated by X-ray diffraction and scanning electron microscopy analysis. Increasing temperature and NH4OH concentration while decreasing particle size obtained higher copper recoveries, reaching values of 84.8%. Under the same conditions, the main impurity (iron) was minimal (<2%). Solution pH also affected slag leaching. Agitation of the solution positively affected the rate of copper extraction. Leaching kinetics of the leaching solution through the porosity formed in the slag was analyzed under the intraparticle diffusion model. The reaction order was 1.2 with respect to the concentration of ammonium hydroxide and the model was inversely proportional to the square of the particle radius. The activation energy obtained was 42.3 kJ/mol for temperature range 283 to 333 K.
The reaction mechanisms in As and As-S systems during their oxidation and/or thermal decomposition are complex to describe due to the physicochemical characteristics of arsenic and its sulfides; the information highlighted in the literature was analyzed and correlated to determinate the predominant phases and reaction mechanisms during the thermal decomposition and oxidation of arsenic, in its elemental form and in sulfurate phases. As a result of this analysis, it was determined that the predominant phases are mainly composed of allotropies of arsenic, sulfides, and dimers. In addition, reaction mechanisms are provided that describe the behavior of arsenic and its sulfides during its thermal decomposition and oxidation.
Compañía Minera del Pacífico (CMP) is the main iron producer on the Pacific coast of the American continent. The Cerro Negro Norte (CNN) operation of CMP is facing important challenges, such as the processing of low-grade ores containing complex gangue minerals which negatively affect the performance of the magnetic separation, grinding and solid–liquid separation stages. CMP is working on a program, aimed at optimizing the efficiency of the CNN plant, which considers a rheological characterization of the slurries produced by the different ores treated, information which will be useful to optimize the performance of the physical separation processes. The objective of this work was to characterize the slurries obtained from the secondary grinding and tailings thickener stages through rheological measurements. The rheological data were correlated with the physical, chemical and mineralogical characteristics of the different geological units (GU) tested. The results show that the rheological flow curves of the slurries taken from the secondary grinding product display a pseudoplastic behavior which follows a Casson model pattern. An exponential model was used to correlate the Casson yield stresses with the solids content of the slurries taken from the secondary grinding product. The results of this fitting process indicate that the yield stresses increase with the % −325# Tyler mesh and with the percentage of minerals with a tendency to generate fines (MTF = smectite + illite/mica + talc + chlorite + kaolinite), and in contrast the yield stresses decrease with the ore iron grade (Fe). For the tailings characterization, the results of settling rates and turbidity values of the supernatant obtained from tests with different GU samples show no significant differences. A linear regression model was used to correlate the results of yield stresses of compacted tailings with the chemical and mineralogical characteristics of the GU. The results of the fitting process indicate that the MTF content in the head ore samples influence the rheological properties of the tailings, which correlates with the behavior of the secondary grinding product. The increase in the GU iron grades also reduced the Casson yield stress. The experimental results were explained in terms of the microrheological effects and the physicochemical properties of the different types of phyllosilicates existing in the ore samples tested in this work.
The increasing generation of mine tailings poses significant environmental challenges, but their reuse in construction materials offers a sustainable solution by reducing the demand for natural aggregates. To advance the use of tailings in construction, the thermal conductivity of mortar samples incorporating copper mine tailings as partial replacements (10% to 50%) for coarse aggregates was investigated. The thermal conductivity was measured using the transient line source method, revealing a progressive increase from 0.32 W/m·K (control sample) to 0.52 W/m·K (50% replacement sample). The statistical analysis (ANOVA) confirmed significant differences among the sample groups, with the tailings content being a key factor. The higher thermal conductivity is attributed to the quartz-rich composition of the tailings, which enhances the heat transfer compared to conventional aggregates. The findings of this study contribute to demonstrating the feasibility of using mortar with copper tailings to modify the thermal conductivity of mortar.