Silicon has been the material of choice of the photonics industry over the last decade due to its easy integration with silicon electronics, high index contrast, small footprint, and low cost, as well as its optical transparency in the near-infrared and parts of mid-infrared (MIR) wavelengths (from 1.1 to 8 μm). While considerations of micro- and nano-fabrication-induced device parameter deviations and a higher-than-desirable propagation loss still serve as a bottleneck in many on-chip data communication applications, applications as sensors do not require similar stringent controls. Photonic devices on chips are increasingly being demonstrated for chemical and biological sensing with performance metrics rivaling benchtop instruments and thus promising the potential of portable, handheld, and wearable monitoring of various chemical and biological analytes. In this paper, we review recent advances in MIR silicon photonics research. We discuss the pros and cons of various platforms, the fabrication procedures for building such platforms, and the benchmarks demonstrated so far, together with their applications. Novel device architectures and improved fabrication techniques have paved a viable way for realizing low-cost, high-density, multi-function integrated devices in the MIR. These advances are expected to benefit several application domains in the years to come, including communication networks, sensing, and nonlinear systems.

Coupling among closely packed waveguides is a common optical phenomenon, and plays an important role in optical routing and integration. Unfortunately, this coupling property is usually sensitive to the working wavelength and structure features that hinder the broadband and robust functions. Here, we report a new strategy utilizing an artificial gauge field (AGF) to engineer the coupling dispersion and realize a dispersionless coupling among waveguides with periodically bending modulation. The AGF-induced dispersionless coupling is experimentally verified in a silicon waveguide platform, which already has well-established broadband and robust routing functions (directional coupling and splitting), suggesting potential applications in integrated photonics. As examples, we further demonstrate a three-level-cascaded AGF waveguide network to route broadband light to desired ports with an overwhelming advantage over the conventional ones in comparison. Our method provides a new route of coupling dispersion control by AGF and benefits applications that fundamentally rely on waveguide coupling.

Objective: As a newly developed technique, focused microwave breast hyperthermia (FMBH) can provide accurate and cost-effective treatment of breast tumors with low side effect. A clinically feasible FMBH system requires a guidance technique to monitor the microwave power distribution in the breast. Compressive thermoacoustic tomography (CTT) is a suitable guidance approach for FMBH, which is more cost-effective than MRI. However, no experimental validation based on a realized FMBH-CTT system has been reported, which greatly hinders the further advancement of this novel approach. Methods: We developed a preclinical system prototype for the FMBH-CTT technique, containing a microwave phased antenna array, a microwave source, an ultrasound transducer array and associated data acquisition module. Results: Experimental results employing homogeneous and inhomogeneous breast-mimicking phantoms demonstrate that the CTT technique can offer reliable guidance for the entire process of the FMBH. In addition, small phase noises do not deteriorate the overall performance of the system prototype. Conclusion: The realized preclinical FMBH-CTT system prototype is capable for noninvasive, accurate and low-side-effect breast tumor treatment with effective guidance. Significance: The experimentally validated FMBH-CTT system prototype provides a feasible paradigm for CTT guided FMBH, establishes a practical platform for future improvement of this technique, and paves the way for potential clinical translation.

Exceptional points (EPs) could potentially enhance the sensitivity of an optical sensing system by orders of magnitude. Higher-order EP systems, having more complex physics, can further boost this parameter. In this paper, we investigate the response order of high-order non-Hermitian systems and provide a guideline for designing a sensor with high response order. Based on this design rule, we propose and demonstrate an optical sensor with a fourth-order response, and analyze its associated properties. The four resonant wavelengths of our optical sensor simultaneously collapse at a high-order exceptional point in the parameter space, providing a fourth root relation between the amount of wavelength splitting and the amplitude of the perturbation. A large sensitivity enhancement factor over 100, is observed when the wavelength splitting is compared with traditional single resonator-based sensors under small perturbation conditions.

A method for the dense integration of high sensitivity photonic crystal (PC) waveguide based biosensors is proposed and experimentally demonstrated on a silicon platform. By connecting an additional PC waveguide filter to a PC microcavity sensor in series, a transmission passband is created, containing the resonances of the PC microcavity for sensing purpose. With proper engineering of the passband, multiple high sensitivity PC microcavity sensors can be integrated into microarrays and be interrogated simultaneously between a single input and a single output port. The concept was demonstrated with a 2-channel L55 PC biosensor array containing PC waveguide filters. The experiment showed that the sensors on both channels can be monitored simultaneously from a single output spectrum. Less than 3 dB extra loss for the additional PC waveguide filter is observed.

Multimode interference (MMI)-based power splitters are fundamental building blocks for integrated photonic devices consisting of an interferometer structure. In order to forestall the ‘capacity crunch’ in optical communications, integrated devices capable of operating in multiple spectral bands (e.g., the conventional telecom window and the emerging 2 µm wave band) have been proposed and are attracting increasing interest. Here, we demonstrate for the first time, to the best of our knowledge, the realization of a dual-band MMI-based 3 dB power splitter operating at the 1.55 and 2 µm wave bands. The fabricated power splitter exhibits low excess losses of 0.21 dB and 0.32 dB with 1 dB bandwidths for 1500–1600 nm and 1979–2050 nm, respectively.