This paper describes a modular solid-state switching cell derived from the Marx generator concept to be used in topologies for generating multilevel unipolar and bipolar high-voltage (HV) pulses into resistive loads. The switching modular cell comprises two ON/OFF semiconductors, a diode, and a capacitor. This cell can be stacked, being the capacitors charged in series and their voltages balanced in parallel. To balance each capacitor voltage without needing any parameter measurement, a vector decision diode algorithm is used in each cell to drive the two switches. Simulation and experimental results, for generating multilevel unipolar and bipolar HV pulses into resistive loads are presented.

This work introduces modified backstepping methods to design controllers for neutral point clamped (NPC) converters interfacing a DC/AC microgrid. The modified backstepping controllers are derived from a proper converter model, represented in dq coordinates, and are designed to regulate the DC voltage and to balance the two NPC converter DC capacitor voltages through a DC offset in the sinusoidal pulse width modulation (SPWM) carriers. The averaged and separated dynamics backstepping controllers also enforce nearly sinusoidal AC currents at a given power factor. The two proposed NPC converter controllers are evaluated through MATLAB/Simulink simulations and experimental implementation using a laboratory prototype. Simulations and experimental results show that the two modified backstepping controllers regulate the microgrid DC voltage in steady state and in transient operation, even with load disturbances or DC voltage reference changes, while enforcing nearly AC sinusoidal currents at a given power factor or injected reactive power. The modified backstepping-controlled NPC converter is bidirectional, converting energy from DC renewable energy sources or storage systems to AC or charging storage systems from AC. The results also highlight the effective balancing of the NPC DC capacitor voltages.

In this work, DC and AC parts of hybrid microgrids are interconnected by a neutral point clamped—NPC converter controlled using a new backstepping predictive (BP) method. The NPC converter is controlled to operate in the DC microgrid voltage control mode or in the AC microgrid power control mode. The novel backstepping predictive controller is designed using the dq state space dynamic model of the NPC converter connected to the hybrid microgrid. The designed BP controller regulates the DC voltage or AC injected power, balances the capacitor voltages, controls the AC currents, and enforces the near unity power factor. Simulation (MATLAB/Simulink) and experimental (laboratory prototype) results show that the converter can regulate the DC voltage in the DC microgrid interconnection point, by adjusting the AC power conversion to compensate variations on the loads or on the distributed renewable energy sources in the DC microgrid. AC currents are sinusoidal with low harmonic distortion. The obtained BP controller is faster at balancing capacitor voltages than PWM (pulse width modulation) control with carrier offset. The fast AC power response allows the converter to be used as a primary frequency regulator of the AC microgrid. This research is appropriate for power and voltage control in hybrid microgrids with renewable energy.

This paper presents generalized dynamic models for Marx derived multilevel half-bridge bipolar modulators. This high-voltage topology uses modular Marx multilevel converter diode (M3CD) cells to generate positive and negative (bipolar) pulses or unipolar (positive or negative voltage pulses). The developed models are tested in transient studies of pulse voltages and currents in the load. Simulation and experimental results are presented and compared.

This work presents an islanded microgrid energy system that uses backstepping control applied to neutral point clamped (NPC) multilevel converters coupled with batteries to behave as virtual generators, able to absorb surplus renewable energy, therefore increasing the penetration of renewable energy sources. Additionally, on a charged battery the virtual generator allows turning-off the backup diesel generator set (GenSet). Aside from improving energy efficiency, the battery-connected multilevel converter aims to regulate frequency, improves power quality, and keeps the microgrid operational in the event of a GenSet failure. The backstepping controlled NPC multilevel converter emulates a virtual generator injecting power to perform as the primary and secondary microgrid frequency controller. Additionally, AC voltage control is implemented, which enables running the islanded microgrid only with multilevel converters, supplied by the battery while integrating solar and wind energy sources. Energy demand and renewable energy forecasts are used to manage the battery state-of-charge. Simulation results, obtained from switched and phasor models show that energy storage and the backstepping frequency control enables the compensation of power fluctuations from renewable energy sources. Furthermore, in the event of the main GenSet failure, the controlled virtual generator keeps the microgrid running for a few minutes, until another GenSet is ready to supply the microgrid. Therefore, the microgrid integration of the battery-connected multilevel converter results in a significant boost in energy efficiency by allowing the disconnection of the backup GenSet.